Passer au contenu principal

bgthermo

Contacter

À propos

Lieu : États-UnisMembre depuis : 05 août 2013

Toutes les évaluations (126)

jdchemist (7031)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Thanks for your business, please come back for more element samples
ltllc17 (3818)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
menacingmutt (1448)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
thanks for your purchase and fast payment!
hunting_stuff (213927)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Thanks for your purchase.
xcaliberadapters (739)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
AAA+++
chief2k (15203)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Thank You for Choosing CHIEF2K MARINE - Hope to Deal with You Again!
Avis (4)
SH-3 Hot Plate Magnetic Stirrer Mixer Stirring 17x17cm 3000ml Dual Control
01 oct. 2017
Great stirrer for price
Way cheaper than similar name brand mag stirrers/hot plates, but performs pretty much equally well. The 500w model has plenty of heating capacity to heat a 1000ml beaker of H20 to boiling quickly. One thing I did notice however, is it's kind of finicky on the low temp end of the dial, like all or nothing when it came to the heating element. Still, it is manageable. Magnetic stirrer works as expected. All in all, it's the most powerfully heating hotplate/stirrer under $100 I have ever seen. Defiantly recommend for amateur chemists or even schools and labs on a tight budget
1x PTFE Stirrer Bearing Adapter for Stirring Shaft 24/29, 24/40 joint OD 7mm 24#
09 déc. 2017
Cant beat it for the price
Works just as good as the $200 Chemglass ones. Maybe not quite as refined but for the price you cant beat it. PTFE seems legit; however, haven't tested against anything very aggressive yet.
Bent 75º Distillation connecting adapter 24/40 premium
01 oct. 2017
Great quality glass for price...
I used it for a distillation of concentrated sulfuric acid. Pulling a very light vacuum, temps measured by thermal IR temp gun showed 250° C at the bend and ~85°C at the joint entering the condenser. The glass handled thermal expansion and stress from this temp variance well, with no cracks. Joints were made well too. Defiantly recommend