Vous en avez un à vendre?

REMPLACEMENT MOTEUR TROY BILT HORSE TILER KOHLER 7 CH COMMERCIAL GARANTIE 3 ANS

État :
Neuf
Plus de 10 disponibles / 124 vendus
Prix :
389,95 $US
Environ534,60 $C
Objet tendance. 124 acheteurs ont déjà acheté cet objet.
Ayez l'esprit tranquille. Renvois acceptés.
Expédition :
37,00 $US (environ 50,73 $C) Standard Shipping. En savoir plussur l'expédition
Lieu : Harrisonburg, Virginia, États-Unis
Livraison :
Livraison prévue entre le lun. 3 juin et le mer. 5 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. L'acheteur paie les frais de port du renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :384284912182
Dernière mise à jour : mai 10, 2024 17:17:46 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Battery Included
No
Power Source
Gas
Crankshaft Direction
Horizontal
MPN
CH270, CH270-3152
Fuel Type
Gasoline
Engine Type
4-Stroke
Brand
Kohler
Type
GASOLINE ENGINE
Battery Life
none
Horsepower
7 HP
Assembly Required
Yes
Manufacturer Warranty
3 Years
Engine Size
7 HP
Voltage
NONE
Model
CH270
Power
gas
Product Line
kohler
UPC
Does not apply

Description de l'objet du vendeur

Lil Red Barn Power Equipment Supply

Lil Red Barn Power Equipment Supply

99,1% d'évaluations positives
242K objets vendus
Visiter la BoutiqueContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.9
Justesse des frais d'expédition
4.7
Rapidité de l'expédition
5.0
Communication
4.9

Évaluations comme vendeur (78 881)

n***o (653)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Thanks
_***m (1)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Sorry for late feed back got engine mounted works great easy start one pull saves my arm works as you sed
5***3 (22)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
No reflection on the seller, but I had three issues with the engine replacement. The crankshaft keyway for the drive pulley was milled about .002" too narrow for either the original or provided key. I was able to narrow the key enough to make it work. The crankshaft pulley/reverse retainer bolt is changed to a 5/16" x 1-3/4" 24tpi bolt. It's an odd size. The engine oil sensor is at the front of the block and the engine wasn't designed to be tipped more than 25-degrees. I had to overfill it.
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.8
12 évaluations du produit
  • 9 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Additional mounting requirements given in my review

    Would have been nice to had a 1 3/4” x 5/16”fine thread bolt included to install pulley to engine shaft. And the need for 3/4” shims 1/4” wide to go over crankshaft on motor. The engine it’s has plenty of power and very easy starting. It is 25 lbs lighter than an original Magnum 8 .

    Achat vérifié : OuiÉtat : NeufVendu par : llrdbrn

  • Not and exact replacement but does the job.

    It wasn't exactly the replacement motor for my particular Troy Bilt Tiller. The Tecumseh motor it was to replace had two output shafts, the second of which was to operate the reverse gear. I modified the tiller frame to accommodate the new Kohler motor, recognizing I would have to manually pull the tiller backwards for reverse. Still it was better than no motor. Kohler works smoothly and has adequate power to operate the tiller. It is quite compared to the Tecumseh, and starts easily.

    Achat vérifié : OuiÉtat : Neuf

  • so far good motor

    good replacenent but had to unhook the low oil sencer because it dose not work it shuts the motor off even when full of oil runs great with thr sencer unhooked

    Achat vérifié : OuiÉtat : Neuf

  • A++ great buy for Troy bilt horse

    Great- Put it on my older Troy bolt horse after the Tecumseh motor needed replacing.. good power, bolted right up. Only thing you will need to buy is a different bolt for the shaft. This mentioned reverse won’t work, my reverse works as it did w original motor.

    Achat vérifié : OuiÉtat : NeufVendu par : llrdbrn

  • Great replacement for my 40 year old TroyBilthorse

    I am thoroughly pleased with the ease of installation and the performance of the Kohler 7hp replacement engine. Brought new life to a wonderful machine.

    Achat vérifié : OuiÉtat : NeufVendu par : llrdbrn