Vous en avez un à vendre?

[2-RANGÉES DEL]POUR CAMION RAM 94-02 TROISIÈME 3ÈME EMPENNAGE FEU STOP CARGO NOIR

Fits Models with Cargo Lights Only! Direct Replacement!
État :
Neuf
Plus de 10 disponibles / 702 vendus
Prix :
18,09 $US
Environ24,85 $C
Prix de mise en vente  29,56 $US Qu'est-ce que cela signifie?
Prix de vente récent fourni par le vendeur
Économisez 11,47 $US (39 % de rabais)
Ayez l'esprit tranquille. Expédition et renvois gratuits.
Objet tendance. 702 acheteurs ont déjà acheté cet objet.
Expédition :
Sans frais Expédition standard. En savoir plussur l'expédition
Lieu : Pasadena, Texas, États-Unis
Livraison :
Livraison prévue entre le jeu. 13 juin et le lun. 17 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. Le vendeur paie les frais de renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :381494839861
Dernière mise à jour : juin 04, 2024 11:39:37 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Color
Black Housing / Clear Lens
LED Color
Red / White
Fitment Type
Direct Replacement
Manufacturer Part Number
SDD-3BLDRAM94LEDBK
Material
ABS Plastic / Polycarbonate Lens
Bulb Size
LED
Brand
Speed Daddy
Lamp Type
LED
Interchange Part Number
55054706/55054845
Housing Color
Black
Installation Note
Harness pin may need modification to match vehicle
Width
12"
Lighting Technology
LED
UPC
DOES NOT APPLY

Description de l'objet du vendeur

Speed Daddy

Speed Daddy

99,1% d'évaluations positives
3,6M objets vendus
Visiter la BoutiqueContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.9
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (762 517)

1***2 (107)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
very nice and excellent buy andvery fast delivery great fit looks great
s***3 (305)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Item arrived as described and quick... definitely recommend this Seller!
y***a (100)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Excellent seller, quick shipment. Will buy again. Thanks
Afficher toutes les évaluations

Évaluations et avis sur le produit

3.5
21 évaluations du produit
  • 10 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Cargo light stays on all the time

    The fit and finish are fine. After correcting the circuit board wiring error, it works fine also. The problem was that on my 2000 Ram 1500, the ground path for the cargo light runs through the headlight switch. It isn't supposed to be connected to the brake light ground, the way this circuit board is. So you need to move the yellow wire over to the pad where the final brake light LEDs are, and then isolate that pad from the rest of the board (cut the copper circuit trace). Now the black wire is the only ground return path for the cargo light LEDs, and it works fine.

    Achat vérifié : OuiÉtat : NeufVendu par : speed_daddy

  • Cargo light stays on all the time

    The circuit board was wired wrong for my 97' Dodge. If you understand electrical circuits and have a soldering iron you can make it work properly but if not then stay away. I was able to make mine work by moving the yellow wire on the circuit board to a different location and scratching apart a section of the board to isolate that circuit. The light does look and work good when wired properly.

    Achat vérifié : OuiÉtat : NeufVendu par : speed_daddy

  • Wiring

    This part looks great, however being LED you have to wire in load resistors or equalizers because the cargo lights will want to stay on.

    Achat vérifié : OuiÉtat : NeufVendu par : speed_daddy

  • 3rd brake light

    Great product for price

    Achat vérifié : OuiÉtat : NeufVendu par : speed_daddy

  • Didn't work as plug and play had to disconnect the white cable because cargo lights would stay on,other than that works fine just as brake light

    Achat vérifié : OuiÉtat : NeufVendu par : speed_daddy