L'objet est en rupture de stock.
Vous en avez un à vendre?

-Boîtier d'ordinateur tour centrale DIYPC DIY-S07 en acier ATX - Noir

État :
D'occasion
Prix :
19,99 $US
Environ27,51 $C
Expédition :
30,54 $US (environ 42,03 $C) Expédition standard. En savoir plussur l'expédition
Lieu : Brea, California, États-Unis
Livraison :
Livraison prévue entre le sam. 22 juin et le mar. 25 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :364709225365

Caractéristiques de l'objet

État
D'occasion: Un objet ayant été utilisé. L'objet peut présenter certaines traces d'usure, mais il ...
Model
DIYPC DIY-S07
Brand
DIYPC
Form Factor
ATX Mid
Number of 3.5 in Drive Bays
2
Case Type
Mid Tower Case
Color
Black
Number of 5.25 in Drive Bays
DIY-S07
MPN
DIYS07
Case Material
Steel
Front Ports
USB, Audio

À propos de ce produit

Product Identifiers

Brand
DIYPC
MPN
DIYS07
Ean
6946815356465
eBay Product ID (ePID)
4039081721

Product Key Features

Case Type
Mid Tower Case
Form Factor
ATX Mid
Case Material
Steel
Color
Black
Front Ports
USB, Audio
Number of 3.5 in Drive Bays
2
Number of 5.25 in Drive Bays
DIY-S07

Description de l'objet du vendeur

Rebornrack

Rebornrack

97,4% d'évaluations positives
56K objets vendus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.8
Justesse des frais d'expédition
4.8
Rapidité de l'expédition
5.0
Communication
5.0

Catégories populaires de cette Boutique

Évaluations comme vendeur (28 624)

r***h (8965)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
★★★★★★ ~ § ~~ § ~~ § ~ AWESOME! 6 Star Service! ~ § ~~ § ~~ § ~ ★★★★★★
Afficher toutes les évaluations

Évaluations et avis sur le produit

3.4
18 évaluations du produit
  • 8 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 2 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 5 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 2 utilisateurs ont attribué une note de 1 étoiles sur 5

Well designed

Good value

Stylish

Avis les plus pertinents

  • Very cheap even for the pricepoint, save for literally anything else

    I remember getting my 20$ rosewill xmb1 case a while back and that blows this hunk of junk out the water, this has so many questionable design choices that other cases dont have at this price point!!! -There is a MASSIVE exhaust port at the top of the case BUT you cant mount fans to it unless you superglue them to the case itself -Top mounted power supply, which isn't bad in itself but the power supply will COVER about half of that exhaust port so it is needlessly letting dust in -very cheap build quality, as again my old rosewill has better metal and if you use a bit of strength you can easily bend or break pieces of this case -side panel is a cheap tinted piece of plastic that would have been better of it was just metal because its so dark you can barely see inside -Only two hard drive ...

    Achat vérifié : OuiÉtat : NeufVendu par : newegg

  • Good price, bad case. Inadequate room for cables in back, the thin slide-in teeth holding the back panel down are stupidly flimsy. A nightmare getting

    Good price, bad case. Inadequate room for cables in back, the thin slide-in teeth holding the back panel down are stupidly flimsy. A nightmare getting the back panel on. Had to bend the teeth back into place repeatedly. Main area depth also too shallow, can't even fit a standard 120mm CPU air cooler. Motherboard tray is so thin and bendy, the cables in the back push it up against the back of the motherboard, which could cause a short. No good way to run front fan connectors back to motherboard.

    Achat vérifié : OuiÉtat : NeufVendu par : newegg

  • Ok case

    Pro well design layout pre-installed fan puts out good wire management is pretty decent and the cost is unbelievable Cons case came dented with missing pieces of paint still worth the deal I'll hit it with some black rustoleum high gloss. Some of the screws provided will not fit this case. Overall well worth the money and good for a budget build.😃😀😄🙃😊

    Achat vérifié : OuiÉtat : NeufVendu par : newegg

  • Cheap case - bare minimum.

    Wish case could have had optional support for an internal 5.25" drives so as to support a cage for four 2.5" hdd or a 3.5" HDD cage stack. Room for 2 x 2.5" drives mounted on the panel and that's it. Case fan molex was very cheap as the pins shifted when trying to seat with PSU molex. Good enough if you need something cheap to put a board, graphics card and two drives in. Would probably have given higher praise at $20-$30 price point.

    État : NeufVendu par : newegg

  • Buy something better - you will thank yourself later

    Extremely cheap case, poorly designed, one showed up with a massive dent in the side which I can only imagine happened at the factory - they're pretty well packaged, no damage on the boxes. Mishandling this case will bend it - no kidding. The side panel is plastic, bends very easily, and does not fit to the case very well. The design of this case puts the power supply at the top, which could be okay, but it is a skinny case. Having the power supply at the top makes the computer badly want to tip over. Spend an extra 5-10 dollars and get something nicer, or at least something with the power supply at the bottom.

    Achat vérifié : OuiÉtat : NeufVendu par : newegg