Vous en avez un à vendre?

Installation de soudure scie à table de scie à table numérique iGaging jauge de hauteur 6 pouces

État :
Neuf
Plus de 10 disponibles / 1 085 vendus
Prix :
18,95 $US
Environ25,91 $C
Objet tendance. 1085 acheteurs ont déjà acheté cet objet.
Ayez l'esprit tranquille. Renvois acceptés.
Expédition :
3,95 $US (environ 5,40 $C) Standard Shipping. En savoir plussur l'expédition
Lieu : Granada Hills, California, États-Unis
Livraison :
Livraison prévue entre le ven. 17 mai et le lun. 20 mai à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. L'acheteur paie les frais de port du renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :310449805053
Dernière mise à jour : mars 23, 2021 13:18:05 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
MPN
35-0906
Brand
iGaging
UPC
080913509067

Description de l'objet du vendeur

Anytime Tools

Anytime Tools

99,9% d'évaluations positives
308K objets vendus
Visiter la BoutiqueContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
5.0
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (173 691)

l***o (360)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
It’s all plastic, it works, but I don’t see it lasting very long. I have other igang products that are great. But igang has lowered there quality. Wish that was in description. My fault for not asking what it is made of.
d***4 (74)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Looks good until now, only time will say.
w***o (863)- Évaluation laissée par l'acheteur.
Dernière année
Achat vérifié
Perfect!
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.8
24 évaluations du produit
  • 20 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Great little tool!

    Great tool. I've been looking for an economical router bit setting tool for quite some time. This little tool is perfect. It can not only be used to measure cuts already made and then setting the router to .001 increments for the finish cut, it can be used to set the fence on the router table with great accuracy. The base is made of sturdy plastic with reinforced edges. The plunger is also plastic with a flat and pointed steel interchangeable tips. The readout quality and accuracy equals that of brand name digital calipers. It would have been nice if it came in a highly polished felt lined mahogany box, but for the price, I'll make a nice little box for it myself. Almost forgot, it can be zeroed at any point and will read + in one direction of travel and - in the other. You can ...

    Achat vérifié : OuiÉtat : NeufVendu par : anytimeparts

  • Descent, but could be improved

    The legs are barely wide enough to span my Bosch router table, wish they were a little wider to make accurate measurements, as that was the reason for purchase. I think the measurement is off a tiny amount. When measuring from zero to a distance and then back to "zero" I get a different reading than zero. Not sure if that's a big deal, still much closer than I could get with a tape measure or ruler. Overall, good value and it'll work for my needs.

    Achat vérifié : OuiÉtat : NeufVendu par : anytimeparts

  • Great tool at a great price.

    It is a good depth/height gauge at an affordable price. The only downside is that the “feet” pads are a bit small and it has trouble standing without being held. It will never be a problem for my use but it is worth noting. Still, Recommend.

    Achat vérifié : OuiÉtat : NeufVendu par : anytimeparts

  • Useful and Precise

    This is an exceptionally useful gauge for setting the depth on your fixed and portable router and table saw. I’ve used it for about a month and have found it very useful fine tuning router cuts . The option of three different units of measure is fantastic. The unit is made of plastic so handle and store with care.

    Achat vérifié : OuiÉtat : Neuf

  • Handy tool

    This depth / height gage is easy to use and accurate wish I had gotten one sooner

    Achat vérifié : OuiÉtat : NeufVendu par : shipping_for_us