Photo 1 sur 6

Imprimante 3D Creality Ender 3 Pro bloc d'alimentation autocollant magnétique neuf - Photo 2 sur 6

Imprimante 3D Creality Ender 3 Pro bloc d'alimentation autocollant magnétique neuf - Photo 3 sur 6

Imprimante 3D Creality Ender 3 Pro bloc d'alimentation autocollant magnétique neuf - Photo 4 sur 6

Imprimante 3D Creality Ender 3 Pro bloc d'alimentation autocollant magnétique neuf - Photo 5 sur 6

Imprimante 3D Creality Ender 3 Pro bloc d'alimentation autocollant magnétique neuf - Photo 6 sur 6

Vous en avez un à vendre?

Vendez le vôtre

Imprimante 3D Creality Ender 3 Pro bloc d'alimentation autocollant magnétique neuf

Dernier exemplaire disponible

État :

Neuf

Quantité :

Le dernier / 4 vendus

Prix :

199,99 $US

Environ272,68 $C

Ayez l'esprit tranquille. Expédition et renvois gratuits.

Expédition :

Sans frais Standard Shipping. En savoir plussur l'expédition

Lieu : Warren, Michigan, États-Unis

Livraison :

Livraison prévue entre le sam. 1 juin et le lun. 3 juin à 43230

Renvois :

Renvoi sous 30jours. Le vendeur paie les frais de renvoi. En savoir plus- pour en savoir plus sur les renvois

Paiements :

Magasinez en toute confiance

Garantie de remboursement eBay

Recevez l'objet commandé ou obtenez un remboursement.

En savoir plusGarantie de remboursement eBay - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet

Informations sur le vendeur

merchandise_group (14305)
99,8% d'évaluations positives

Inscrit comme vendeur professionnel

Signaler cet objet - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet

Le vendeur assume l'entière responsabilité de cette annonce.

Numéro de l'objet eBay :304839773606

Dernière mise à jour : févr. 27, 2024 14:04:52 HNEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État: Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ... Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine (s'il y a lieu). L'emballage doit être identique à celui utilisé pour la vente au détail, à moins qu'il soit fabriqué à la main ou le fabricant ait utilisé un emballage non destiné à la vente au détail, par exemple une boîte ou un sac de plastique non marqué. Veuiller consulter l'annonce pour tous les détails. Afficher toutes les définitions d'état(s'ouvre dans une nouvelle fenêtre ou un nouvel onglet)

3D Technology: Cartesian

Filament: 1.75mm

Molding Tech: FDM

MPN: 201804090201

Maximum Print Size: 8.7x 8.7x 9.8 inch

Brand: Creality 3D

Nozzle Size: 0.4mm

Max. Printing Height: 250mm

Type: 3D Printer

Max. Printing Width: 220mm

Maximum Resolution: No

Model: Ender 3 Pro

Max. Printing Depth: 220mm

Frame Material: Aluminum

Printing Speed: Normal: 80mm/s, Max.: 200mm/s

Features: Adjustable Layer Thickness, Adjustable Print Speed, DIY Kit, Heated Build Plate

Country/Region of Manufacture: China

Interface: USB 2.0

UPC: Does not apply

Description de l'objet du vendeur

Le vendeur assume l'entière responsabilité de cette annonce.

Numéro de l'objet eBay :304839773606

Dernière mise à jour : févr. 27, 2024 14:04:52 HNEAfficher toutes les modificationsAfficher toutes les modifications

Expédition et manutention

Lieu où se trouve l'objet :

Warren, Michigan, États-Unis

Expédition :

Afghanistan, Afrique du Sud, Albanie, Algérie, Andorre, Angola, Anguilla, Antigua-et-Barbuda, Arabie saoudite, Argentine, Arménie, Aruba, Australie, Autriche, Azerbaïdjan, Bahamas, Bahreïn, Bangladesh, Belgique, Bermudes, Bhoutan, Bolivie, Bosnie-Herzégovine, Botswana, Brunéi Darussalam, Brésil, Bulgarie, Burkina Faso, Burundi, Bélize, Bénin, Cambodge, Cameroun, Canada, Chili, Chypre, Colombie, Corée du Sud, Costa Rica, Côte d'Ivoire, Danemark, Djibouti, Espagne, Estonie, Fidji, Finlande, France, Gabon, République du, Gambie, Ghana, Gibraltar, Grenade, Groenland, Grèce, Guatemala, Guinée, Guinée équatoriale, Guinée-Bissau, Guyana, Géorgie, Haïti, Honduras, Hongrie, Inde, Indonésie, Irlande, Islande, Israël, Italie, Jamaïque, Japon, Jordanie, Kazakhstan, Kenya, Kirghizistan, Kiribati, Koweït, Laos, Lesotho, Lettonie, Liban, Libéria, Liechtenstein, Lituanie, Luxembourg, Macédoine, Madagascar, Malaisie, Malawi, Maldives, Mali, Malte, Maroc, Mauritanie, Mexique, Moldavie, Monaco, Mongolie, Montserrat, Monténégro, Mozambique, Namibie, Nauru, Nicaragua, Niger, Nigeria, Norvège, Nouvelle-Zélande, Népal, Oman, Ouganda, Ouzbékistan, Pakistan, Panama, Papouasie-Nouvelle-Guinée, Paraguay, Pays-Bas, Philippines, Pologne, Portugal, Pérou, Qatar, Roumanie, Rwanda, République centrafricaine, République de Croatie, République dominicaine, République du Congo, République démocratique du Congo, République tchèque, Saint-Kitts-et-Nevis, Saint-Marin, Saint-Vincent-et-les Grenadines, Sainte-Lucie, Salvador, Samoa, Serbie, Seychelles, Sierra Leone, Singapour, Slovaque, Slovénie, Sri Lanka, Suisse, Suriname, Suède, Swaziland, Sénégal, Tadjikistan, Tanzanie, Taïwan, Tchad, Thaïlande, Togo, Tonga, Trinité-et-Tobago, Tunisie, Turkménistan, Turquie, Uruguay, Vanuatu, Vietnam, Wallis-et-Futuna, Yémen, Zambie, Zimbabwe, Égypte, Émirats arabes unis, Équateur, Érythrée, État de la Cité du Vatican, États-Unis, Éthiopie, Île Maurice, Îles Caïmans, Îles Salomon, Îles Turks et Caicos, Îles du Cap-Vert

Lieux exclus :

Alaska/Hawaii, Barbade, Guadeloupe, Guyane française, Libye, Martinique, Nouvelle-Calédonie, Polynésie française, Protectorats des États-Unis, Russie, Réunion, Ukraine, Venezuela

Changer de pays :

Code postal :

Expédition et manutention	À	Service	Livraison*Voir les remarques sur la livraison
Expédition sans frais	États-Unis	Standard Shipping	Livraison prévue entre le sam. 1 juin et le lun. 3 juin à 43230

*Les dates de livraison approximatives – s'ouvre dans une nouvelle fenêtre ou un nouvel onglet tiennent compte du délai de manutention du vendeur, du code postal de l'expéditeur, du code postal du destinataire et de l'heure de l'acceptation et dépendent du service d'expédition sélectionné et de la réception du paiement. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.Remarques - Livraison *Les dates de livraison approximatives tiennent compte du délai de manutention du vendeur, du code postal de l'expéditeur, du code postal du destinataire et de l'heure de l'acceptation et dépendent du service d'expédition sélectionné et de la réception du paiement. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.

Délai de manutention

Expédition dans les 1 jours ouvrables après réception du paiement.

Taxes

Des taxes peuvent s'appliquer à la conclusion de la transaction. En savoir plusEn savoir plus au sujet du paiement de taxes sur les achats eBay.

Taxe de vente pour cet objet (304839773606)

Le vendeur facture une taxe de vente pour les États suivants :

État	Taux de la taxe de vente

*La taxe s'applique uniquement au sous-total + frais d'expédition et de manutention pour les objets dans ces États

Modalités de renvoi

Après réception de l'objet, contactez le vendeur dans un délai de	Mode de remboursement
30 jours	Remboursement, Remplacement

Les frais d'expédition du renvoi sont à la charge du vendeur.

Détails du paiement

Modes de paiement

The Merchandise Group

99,8% d'évaluations positives

63K objets vendus

Visiter la Boutique Contacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description

4.9

Justesse des frais d'expédition

5.0

Rapidité de l'expédition

5.0

Communication

5.0

Évaluations comme vendeur (14 821)

Cet objet (1)

Tous les objets (14 821)

7***- (180)- Évaluation laissée par l'acheteur.

Six derniers mois

Achat vérifié

Christmas gift for my son he loves it!

Afficher toutes les évaluations

Évaluations et avis sur le produit

Rédiger un avis

4.7

278 évaluations du produit

237 utilisateurs ont attribué une note de 5 étoiles sur 5
21 utilisateurs ont attribué une note de 4 étoiles sur 5
3 utilisateurs ont attribué une note de 3 étoiles sur 5
5 utilisateurs ont attribué une note de 2 étoiles sur 5
12 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

Afficher tous les avis (244)

par jeepmanjeep
mars 25, 2019
Ender 3 Pro is an amazing printer.
The Ender 3 pro was a very easy build I had it ready to print in 1:15 hours and it’s printed through two rolls of filament now and I’m amazed with the quality of prints and the over quality of the printer. It was worth every penny I spent on it. Also, the shipping took two days, so that was amazingly fast. The only thing I had to alter on the printer has been the bed leveling springs for ones that are stiffer. A $8 fix. The magnetic bed cover is great for getting parts off the bed. You just have to get the shiny new off it by washing and I put a little Elmer’s glue on it. No unstuck prints what so ever running 60deg on the bed for pla plus. The only thing I’d change about this machine is making the bed larger. I love the printer and most people that have had experience with printers before ... The Ender 3 pro was a very easy build I had it ready to print in 1:15 hours and it’s printed through two rolls of filament now and I’m amazed with the quality of prints and the over quality of the printer. It was worth every penny I spent on it. Also, the shipping took two days, so that was amazingly fast. The only thing I had to alter on the printer has been the bed leveling springs for ones that are stiffer. A $8 fix. The magnetic bed cover is great for getting parts off the bed. You just have to get the shiny new off it by washing and I put a little Elmer’s glue on it. No unstuck prints what so ever running 60deg on the bed for pla plus. The only thing I’d change about this machine is making the bed larger. I love the printer and most people that have had experience with printers before will find this one a breath of fresh air.
Achat vérifié : OuiÉtat : NeufVendu par : creality-3d-direct
par ctyler0009
nov. 12, 2019
Beautiful printer for a fraction of the coast
I'm very happy with this printer, it did come with a few scratches from being a refurbished model (as to be expected) but some of the components were already assembled and all of the hardware was there, packaged as if it were new. So far the printer has been printing perfectly after I adjusted some screws on the bed to tighten everything up and now its printing on its own without any trouble. I haven't even had to relevel the bed since getting it down the first time. The magnetic pad is working better than expected so I'm not rushing off to get a glass plate yet but I can see that it won't last forever. Overall a great purchase for the money and its printing better than some systems I have at my work which cost several hundred more.I'm very happy with this printer, it did come with a few scratches from being a refurbished model (as to be expected) but some of the components were already assembled and all of the hardware was there, packaged as if it were new. So far the printer has been printing perfectly after I adjusted some screws on the bed to tighten everything up and now its printing on its own without any trouble. I haven't even had to relevel the bed since getting it down the first time. The magnetic pad is working better than expected so I'm not rushing off to get a glass plate yet but I can see that it won't last forever. Overall a great purchase for the money and its printing better than some systems I have at my work which cost several hundred more.
Achat vérifié : OuiÉtat : OccasionVendu par : 3d-printer-online
par cruud
nov. 23, 2020
Great value for an entry-to-mid 3d printer
I purchased this printer used at about 75% of the cost of a new unit. This was as a replacement to a cheaper (Labists) mini printer once I knew this was a hobby worth pursuing. It has all of the features you should be looking for if you want to get into 3d printing without major hassles: a heated bed, control board, and a community of modders and manufacturers with upgrades. I was left high and dry with the Labists; I couldn't get good adhesion, had no real time control of temperature, and the print area was small to boot. Plus, there was hardly any support online. Enter the Ender! This thing is worth the hype. It's amazing what features you can get for the base price of $160, let alone the $120-ish you can get this for used. I already had filament so I was up and running in just a few ... I purchased this printer used at about 75% of the cost of a new unit. This was as a replacement to a cheaper (Labists) mini printer once I knew this was a hobby worth pursuing. It has all of the features you should be looking for if you want to get into 3d printing without major hassles: a heated bed, control board, and a community of modders and manufacturers with upgrades. I was left high and dry with the Labists; I couldn't get good adhesion, had no real time control of temperature, and the print area was small to boot. Plus, there was hardly any support online. Enter the Ender! This thing is worth the hype. It's amazing what features you can get for the base price of $160, let alone the $120-ish you can get this for used. I already had filament so I was up and running in just a few hours. It looked brand new when assembling. It wasn't until I tried my first print did I discover existing filament in the hot end, otherwise I would have never known. First tip: watch setup videos. Pay attention to the areas where you need to be precise and align well. Notably, the angle of the X axis bar has some play to it, so align it as well as you can to the bed so the bed can level with minimal adjustment. Pay attention to the Z stop and know how it works. Make sure the printer is on a level surface and has no wobble. Leveling is pretty easy but finicky. You'll have to level every few prints just to make sure something hasn't moved. In stock, the printer prints with high precision and I was excited to have a few great prints pretty quickly, and I learned more as I used it. I'm now at a point where I understand issues as they pop up and how to fix them. Luckily, in 3d printing, you know pretty quick if there will be a more common issue, so there's not much waste. Once you are happy, you'll find yourself wanting to get more out of it, but at stock this works amazingly well. Most of the upgrades are not critical but make the process easier. My top 3 recommended upgrades are: 1.) Tempered glass build plate- better adhesion and release. The stock plate sticks well but almost TOO well, and I hate jabbing at the print with a scraper to get it to release. 2.) Auto-bed leveling kit- leveling isn't hard and it gets better the more you learn, but an AL kit just makes the whole process easier. You k kw you will get consistent first layers every time. 3.) Silent board- I got this because I wanted compatibility with the AL kit without needing an adapter but I ended up loving how quiet the printer becomes as a result. ALL of the high-pitch whines are gone. It's almost all fan noise now. It's great, especially since the printer is in my office where I'm often on Zoom calls. 4.) The rest are low priority, but you can get a bigger print space with extenders, change to laser cutting/engraving, better extrusion, etc. Great upgrades but this far unnecessary. The point is that you CAN do those upgrades because they are all available. Buy with confidence. You'll be printing in no time!
Achat vérifié : OuiÉtat : OccasionVendu par : sovol-3d-printer
par ravenownz
mai 11, 2020
Awesome starter printer
After looking through my options out there I decided on an Ender 3 Pro. I’ve used a TAZ5 beforehand and those are not within the same comparison, but I’m aware of how to work the 3D prints. I’ve made a handful of figurines to operating parts successfully and with hardly any issues. Make sure to purchase decent filament and you won’t have to fight the thing. I recommend watching one of the many YouTube videos while assembling so no issues arise during use. I do a simple wipe clean on the bed after each use and so far it’s been a joy to operate. If you’re interested in 3D printing, this is a great one to start out on.After looking through my options out there I decided on an Ender 3 Pro. I’ve used a TAZ5 beforehand and those are not within the same comparison, but I’m aware of how to work the 3D prints. I’ve made a handful of figurines to operating parts successfully and with hardly any issues. Make sure to purchase decent filament and you won’t have to fight the thing. I recommend watching one of the many YouTube videos while assembling so no issues arise during use. I do a simple wipe clean on the bed after each use and so far it’s been a joy to operate. If you’re interested in 3D printing, this is a great one to start out on.
Achat vérifié : OuiÉtat : NeufVendu par : dustandlight
par dallenmarket
juil. 16, 2020
Great entry level printer
Great beginner (entry level) 3-D Printer. Goes together easily and quickly if you follow any of the good, free instruction videos on YouTube. (The instructions that come with it are confusing and barely understandable due to being written by someone obviously with school learned English, but not a native English speaker.) There are other videos that explain everything from proper bed leveling to printing and there are thousands of free files available to print on it from places like Thingiverse. If you want to design from scratch, there are many "CAD" apps available that can save the file as a .stl. (There are also free YouTube videos that explain "how to" in an of the CAD apps.) The first thing that anyone should print are some of the after market accessories for the printer. Search ... Great beginner (entry level) 3-D Printer. Goes together easily and quickly if you follow any of the good, free instruction videos on YouTube. (The instructions that come with it are confusing and barely understandable due to being written by someone obviously with school learned English, but not a native English speaker.) There are other videos that explain everything from proper bed leveling to printing and there are thousands of free files available to print on it from places like Thingiverse. If you want to design from scratch, there are many "CAD" apps available that can save the file as a .stl. (There are also free YouTube videos that explain "how to" in an of the CAD apps.) The first thing that anyone should print are some of the after market accessories for the printer. Search "Ender 3" on Thingiverse and you'll find many. I use Cura for converting the files from.stl to .gcode, which is what the machine needs to print. 1. I have the upper and lower filament guides on mine and it fixes one of the weaknesses of this model printer. The standard position of the filament spool holder on top of the printer's frame is good, but it makes the filament need to make a sharp turn before entering the filament feeder assembly. The 2 "guides" ((downloaded separately) allow the filament to curve out and back again in a smooth arc that feeds easily. Also, always set the spool so that gravity helps the flow of the filament It should hang with the filament passing under the spool as it goes towards the upper guide. (The spool will turn clockwise as seen from the front of the machine with the filament exiting on the bottom of the spool.) There are other spool feeders available, but I like the top mount as you can see the spool turn and how much filament is left on it at a quick glance. 2. Print and install the PCB cover that covers the bottom of the control screen frame and keeps anything from accidentally getting under the PCB and shorting out the display circuits. 3. There are numerous under the bed storage drawers , but read the instructions and if they are too wide for your machine, scale them in "Cura: to fit before printing. 4. There are some good accessory cooling fan housings. (go on the bottom of the extrusion head and channel the cooling air better than stock.) 5. Upper Z axis bracket. Takes any wobble out of the threaded rod that is the Z-Axis. It requires a couple of very small screws, a pair of "hammer nuts' (also available for free printing) and a small bearing that cost me a couple of dollars on eBay. 6. A nice to have is the front handle that connects to the front of the bad and makes for easier movement of the bed when leveling. 7. You might have better luck, but I printed a knob for the feed assembly that helps feed the filament through. Mine only lasted for a few uses before the opening in its bottom that fits over the top of the screw assembly stripped and would not turn the screw anymore. The 2 things I found you must do ALWAYS: 1. Level each of the 4 corners of the bed using a sheet of printer paper. Do that every time you are starting a new print and keep moving around the corners adjusting until the level is perfect. 2. Clean the top of the bed surface with a cotton swab and rubbing alcohol before each use. I do my last cleaning while the printer is processing the job. It takes a while for the printer bed and nozzles to heat to the proper temp and I use that time for one extra "cleaning" Don't do either of those steps properly and your print will fail.
Achat vérifié : OuiÉtat : NeufVendu par : sovol-3d-printer