Vous en avez un à vendre?

LOT DE BASE DE 5 PIÈCES Hanson 394001 3/8,11 mm,1/2,14 mm,16 mm

État :
Neuf
2 disponibles
Prix :
48,27 $US
Environ66,41 $C
Ayez l'esprit tranquille. Expédition et renvois gratuits.
Expédition :
Sans frais Expédition standard. En savoir plussur l'expédition
Lieu : Northville, Michigan, États-Unis
Livraison :
Livraison prévue entre le jeu. 20 juin et le lun. 24 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. Le vendeur paie les frais de renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :276004712820
Dernière mise à jour : mai 25, 2024 08:36:06 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
Hanson
MPN
394001
UPC
024721012579

Description de l'objet du vendeur

TopToolStore

TopToolStore

98,3% d'évaluations positives
7,6K objets vendus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.9
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
4.9
Communication
5.0

Évaluations comme vendeur (1 989)

0***0 (1076)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Packed well, shipped fast. Thanks for finding this!!
_***e (2755)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Item as advertised, would buy from again.
a***4 (1002)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Works great … too bad it doesn’t oscillate!

Évaluations et avis sur le produit

4.6
50 évaluations du produit
  • 43 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Well-made bolt extractor set

    The Irwin bolt extractor set, the base one, was packed well in a case. The description was fine, indicating there were five extractors but should have put down what the extractors were: The ad should have included this: The Base Set includes a heavy-duty resin carrying case and includes bolt extractors to remove fractional size bolts that are 3/8", 7/16", 1/2", 9/16", 5/8" and metric size bolts 11mm, 14mm, 16mm.

    Achat vérifié : OuiÉtat : NeufVendu par : roytan2012

  • Hands down a must have for any stripped bolt/screw

    These are amazing!!! I do a lot of work on motorcycles, and got a harley in that had a tension screw (the one that holds the shifter arm in place) completely stripped. It was so bad you couldn’t even get a flathead screwdriver on it. Plus to make matters worse, there was an extremely small range of motion area I was dealing with. After attempting numerous types of pliers (including channel locks), and breaking two different “speed out” bits, I was about to throw in the towel and call it quits. I made a trip up to my local Lowe’s just to chill out for a minute, and to see if I could come up with any other ideas. That’s when I stumbled upon these beauties. After two days of bloody knuckles, and zero patience left, I figured what the hell is a few more bucks and some more frustration??? After ...

    État : NeufVendu par : xangussupplyx

  • A must have tool set.

    I recently put exhaust headers on my truck and had a number of rusted, stuck bolts to deal with. Some of the bolts were rusted so bad they were entirely rounded off. After seeing these advertised I thought I would gives them a try. I had to go down several sizes to find a size that would fit the damaged bolts, but with a pull of the trigger on the air impact they zipped right off. I was amazed how easily they worked, they are definitely a must have! These also accept a 3/8 drive or ratchet, which some of the other brands don't.

    Achat vérifié : OuiÉtat : NeufVendu par : hotsalesu

  • They are a must have. LIFE SAVER!!

    They work great. Might have to tap the socket on a little and then just use the ratchet and the bolt will come right out. LIFE SAVER. If you don't have any of these sockets, they are a must. Will definitely pay for them selves the first time you use them.

    Achat vérifié : OuiÉtat : NeufVendu par : inbox0327

  • It does it job removing damaged bolt head

    I could not remove the damaged bolt in my brake caliper. I used the 14mm bolt extractor from Irwin. Tap the extractor to the damaged bolt. I attached the 3/4 ratchet in just one turn, the bolt loosened and able to removed it.

    Achat vérifié : OuiÉtat : NeufVendu par : angjo5920

Il s'agit d'une enchère privée et votre identité ne sera divulguée à personne d'autre que le vendeur.