Vous en avez un à vendre?

Carte de gestion réseau APC AP9630 NMC Smart-UPS 2 dernier câble série micrologiciel

État :
D'occasion
Tested and Reset to Factory Default, Comes with original APC Serial Cable, Firmware is Upgraded to ... En savoir plussur l'état
Plus de 10 disponibles / 26 vendus
Prix :
90,00 $US
Environ123,14 $C
Objet tendance. 26 acheteurs ont déjà acheté cet objet.
Ayez l'esprit tranquille. Renvois acceptés.
Expédition :
Sans frais Expédition accélérée. En savoir plussur l'expédition
Lieu : Baltimore, Maryland, États-Unis
Livraison :
Livraison prévue entre le ven. 7 juin et le sam. 8 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. L'acheteur paie les frais de port du renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :274976287370
Dernière mise à jour : mai 15, 2024 18:39:54 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
D'occasion
Un objet ayant été utilisé. L'objet peut présenter certaines traces d'usure, mais il fonctionne parfaitement. Il peut s'agir d'un article en montre ou d'un objet retourné au détaillant et ayant été utilisé. Veuillez consulter l'annonce pour tous les détails et une description des imperfections. Afficher toutes les définitions d'état(s'ouvre dans une nouvelle fenêtre ou un nouvel onglet)
Remarques du vendeur
“Tested and Reset to Factory Default, Comes with original APC Serial Cable, Firmware is Upgraded to ...
Custom Bundle
No
Modified Item
No
Country/Region of Manufacture
Philippines
UPC
0151903024287
Brand
APC
Type
Management Adapter/Card
MPN
AP9630

À propos de ce produit

Product Information

Turn technology into something practical with the APC UPS: AP9630 network management card. With a multi-user access capability and support in a variety of languages, this network management card makes the actual management something simple. Internal data logging provides helpful information regarding problematic trends before they become a problem in the network, and all information is browser accessible while remaining secure. With included individual password protection, this network management card offers peace of mind without the hassle of a difficult setup. It also allows for the management of all of those APC devices from a single system with a forward to a specific device.

Product Identifiers

Brand
APC
MPN
AP9630
UPC
0151903024287, 0731304267416
eBay Product ID (ePID)
129639475

Product Key Features

Type
Management Adapter/Card

Description de l'objet du vendeur

InStock901_Miro

InStock901_Miro

99,5% d'évaluations positives
55K objets vendus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.9
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (10 574)

o***8 (5)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Outstanding service. Thanks so much!
Afficher toutes les évaluations

Évaluations et avis sur le produit

5.0
35 évaluations du produit
  • 34 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Difficult to configure

    There is nothing wrong with the card, specially when it is new. If it is used it has a configuration on it. So you think a quick arp - a will give you what you need but no, that won't work. So you think, hey, I select the reset and then I am done. No that not either. What you need to do is hook it up with a serial cable, the one APC has, not the one you have left over and set it to 2400, 8, n, 1, none and push the reset on the card. When the led blinks orange green push the reset again and use hyperterm to get in it. The pass word is "aps" and PW is "aps" within 30 seconds. If you are to late, start over. Once you are in it you have to set the admin password quickly, or start back over. After you do it 10 times you get the drift. NOW you can set the IP and log into it with a computer on ...

    Achat vérifié : OuiÉtat : OccasionVendu par : ssinc1500

  • Worked perfectly, great condition

    These cards worked perfectly in my UPSs. They were carefully packed in anti-static packaging. Despite being used, the faceplates were clean - no scratches or sticker residue. The firmware on them was quite old, but they were easy to flash with the latest firmware. I did replace the rubber feet under the cards, as those had deteriorated, but that was easy too.

    Achat vérifié : OuiÉtat : OccasionVendu par : itequipment

  • The Only Show In Town!

    If you need one, you need one plain and simple. That being said, the card does its job well and is of excellent construction. The only issue I would ever have with the card is that the onboard battery is not replaceable.

    Achat vérifié : OuiÉtat : OccasionVendu par : compupartsandmore

  • indispensable with every APC

    Very good product indispensable for any APC. Good packaging and very easy to use. Unfortunately it was not reset to factory defaults on receipt. But this is very easy to do yourself after some searching on Google.

    Achat vérifié : OuiÉtat : OccasionVendu par : zhw0021

  • When it works it works.

    Check the APC website to see which network card your UPS is compatible with. Mine uses the expansion 2 slot. You just have to hold the reset button for 10-12 seconds (look at the indicator light) and it’s fully reverted to DHCP and factory settings.

    Achat vérifié : OuiÉtat : OccasionVendu par : georgiacomputerincorporated