Vous en avez un à vendre?

Guide de bord de scie circulaire de précision Kreg KMA2685 Rip-Cut 24 pouces 760 x 76 mm 7 pouces ACCU-CUT

État :
Neuf
2 disponibles / 2 vendus
Prix :
104,95 $US
Environ143,69 $C
Ayez l'esprit tranquille. Renvois acceptés.
Expédition :
20,00 $US (environ 27,38 $C) Expedited Shipping from outside US. En savoir plussur l'expédition
Les objets provenant de l'étranger pourraient faire l'objet de frais d'administration douanière et de frais supplémentaires.
Expédition internationale — Des frais d'administration douanière pourraient être exigés en fonction de la valeur en douane de l'objet.
 
Les vendeurs déclarent la valeur en douane de l'objet et doivent se conformer aux lois régissant les déclarations douanières.
 
Informations
En tant qu'acheteur, n'oubliez pas de tenir compte des éléments suivants :
• retards en raison de l'inspection douanière;
• droits à l'importation et taxes que les acheteurs doivent payer;
• frais de courtage payables au point de livraison.
 
Pour de plus amples renseignements, adressez-vous au bureau de douane de votre pays. Vous pouvez également consulter la page d'eBay relative aux transactions internationales.
Lieu : Seoul, Corée du Sud
Livraison :
Livraison prévue entre le ven. 21 juin et le ven. 28 juin à 43230
Les dates de livraison approximatives – s'ouvre dans une nouvelle fenêtre ou un nouvel onglet tiennent compte du délai de manutention du vendeur, du code postal de l'expéditeur, du code postal du destinataire et de l'heure de l'acceptation et dépendent du service d'expédition sélectionné et de la réception du paiementréception du paiement - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Veuillez prévoir un délai supplémentaire si la livraison internationale est assujettie à des formalités douanières.
Renvois :
Renvoi sous 14jours. L'acheteur paie les frais de port du renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :273620205679
Dernière mise à jour : mars 30, 2022 03:21:49 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert et non endommagé (incluant les objets faits à ...
MPN
KMA2685
Country/Region of Manufacture
China
Brand
Kreg
UPC
6049746517285

Description de l'objet du vendeur

Sunshine E-Commerce

Sunshine E-Commerce

98,2% d'évaluations positives
4,0K objets vendus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.9
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
4.9
Communication
4.9

Évaluations comme vendeur (842)

i***i (531)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Thank you!
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.6
111 évaluations du produit
  • 90 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 8 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 6 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Easy to take the saw to material instead of the material to the saw.

    I would recommend it, the value is good and the quality is okay. Set up was fairly simple, had to make a few adjustments. I suggest you check the measured cut before using it after it has been set up for a while. The only concern I have is the base mount for the circular saw. You would think Kreg would have a better and strong base then the plastic used. It's okay, and the clamp that holds the base to the adjustable cutting slide is a little weak as well. I expect I'll have to change that after some serious use. What ever you do....don't drop it.

    Achat vérifié : OuiÉtat : Neuf

  • Another great product from Kreg jig

    This is a must have tool for anyone that works with sheets of plywood. It makes cutting down a 4 x 8 ft sheet of material easy, safe, accurate, repeatable cuts and doable by one person without the cost and size of a panel saw. This is another very innovative design from "kreg jig" that is well built and will provide many years of service.

    Achat vérifié : OuiÉtat : NeufVendu par : ryh628

  • Shocked

    WOW !!! I'm totally impressed!!! I could never cut very good with a circular saw and I'm doing a project were I have to rip a bunch of 3/4" plywood and I saw a video on this kreg jig so I figured I would give it a try. I put my circular saw on it which took no time and started cutting I set it up to cut 3" off the length of the plywood and it's dead on the money!! Now I cut excited straight and smooth lines every time!! Thank you very much!!

    Achat vérifié : OuiÉtat : NeufVendu par : woodcraft_supply

  • Kreg made it happen with this tool.

    I checked a few reviews on this Kreg rip cut guide. This is a top rated tool for making rip cuts of large pieces of stock like a 4x8 sheet of plywood. I own this fine tool. It is easy to use and easy to set up. When properly set up and with the correct blade on your circular saw, You will be making a lot of accurate cuts, provided the edge you are guiding on is square, YES, you can cross cut with this for some cuts. remember you are limited to a 24 inch wide cut. If you are crosscutting and need any wider than 24 inches, then you will need the Kreg accucut for that. Kreg makes some great tools. If you want a great rip cut guide that is easy to use and set up then you will want to get this one. It is easy on the wallet too, Check out a few safety tips on rip cutting large sheets so you can ...

    État : NeufVendu par : lifestylebyfocus

  • Ripping plywood was never so easy.

    Installed a fresh blade on my saw and tried the new guide. The cuts stay perfectly true even after cutting multiple strips from the same sheet. Also works great for cutting boards into narrow strips.

    Achat vérifié : OuiÉtat : NeufVendu par : tall-corn