Vous en avez un à vendre?

Routeur N sans fil Linksys E1000 300 Mbit/s 4 ports 10/100 (neuf scellé)

État :
Neuf
Prix :
15,00 $US
Environ20,56 $C
Expédition :
9,50 $US (environ 13,02 $C) Expédition standard. En savoir plussur l'expédition
Lieu : Saint Marys, Ohio, États-Unis
Livraison :
Livraison prévue entre le lun. 10 juin et le mer. 12 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :266760597389
Dernière mise à jour : avr. 14, 2024 18:32:44 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
Linksys
Type
Cable
Maximum LAN Data Rate
300 Mbps
Color
Black
Model
Linksys E1000
Maximum Wireless Data Rate
300 Mbps
Connectivity
Wireless
MPN
E1000
Number of LAN Ports
4

Description de l'objet du vendeur

us_kuh3

us_kuh3

98% d'évaluations positives
178 objets vendus
Autres objets du vendeurContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.8
Justesse des frais d'expédition
4.8
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (47)

r***7 (110)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
This radio was purchased as used however, it was filthy when I opened the box!! The entire radio had to be cleaned and degreased. The knobs were so dirty I had to scrape build up off. I probably would not purchase again from this seller based on this .As a seller I would have cleaned this item, never would have sent a something so dirty and full of grease and grime.
7***g (146)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Just as described!
9***9 (373)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
AAAAA

Évaluations et avis sur le produit

4.5
182 évaluations du produit
  • 140 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 24 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 7 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 7 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • good for the price if using for basic home use.

    the E1000 is a very decent router for it's price range. Though it's considered by most as a low-end router (often sold in stores really cheap as refirbished), it has good range, produces low heat (rare for this particular design due to the case not having much room inside), and solid throughput rates. It is capable of some editions of 3rd party firmwares (Tomato, DD-WRT) which add features such as VPN, repeater mode, wireless/lan bridges, and multiple SSID's, however, some of the added features are limited by the routers CPU and amount of flash memory. Multiple SSID's and Repeater functions lower it's range considerably. The router also seems to drop signal if mroe than 3 or 4 devices connect at a time as the CPU can't handle that much. The stock firmware is ...

  • Old Technology That Can Not Provide The Greater Internet Speeds That Are Available Today

    This Linksys product is old technology. It can only handle internet speeds up to 100 Mbps. Most internet service providers put out 200 Mbps. Consequently, your internet speed is slow. The same. thing goes for the Linksys E1200 and the LInksys E3000. They can only handle speeds up to 100 Mbps. Thess Linksys routers came out in 2010 and worked great. However, they can not provide the greater internet speeds that are available from your ISP. An excellent replacement is the Linksys MR7350 Mesh Router.

    Achat vérifié : OuiÉtat : NeufVendu par : grohstreasures

  • great router overall, and a fantastic price.

    I needed a low cost solution, I've had good experience with Linksys in the past, and have owned an E1000 before. I bought two of them, one to use as a main router, and the other to use as a wireless repeater/adapter. I was able to get that setup without a problem using DD-WRT. (which installed without a hitch on both.) Cons: The only con I think of with this router is that the my max download speed while connected through wireless has been greatly reduced, however the trade off is greater range and higher speeds in the lower-range areas than with my old router. Other notes: using speedtest.net I get an average of 20-25mbps wired. Wireless I get 12-15mbps on a full signal, and 8-10 on medium signal, and 6-7 on a low signal. My ISP is Comcast Xfinity.

  • Good value

    I purchased this router since it was identical to my existing one which has worked satisfactorily for years. I needed it to form a second network for a work project, and, since it is an older model, it was for sale at an excellent price.

    Achat vérifié : OuiÉtat : OccasionVendu par : websbestdeals

  • Linksys E-1000 wireless N router

    Router was a replacement for an older Linksys b/g band router. A newer computer that I had purchased used the N range so I updated since the new router is backward compatible with the g band for older computers. It was also advertised as having a longer range and better signal than the b/g which it does. Startup and getting the computers on a secure lan wasn't too bad, but getting the network printer on the secure network was another story. During the installation phase I got several messages saying that the router could not be found, but I had seen warnings about this on the internet that such messages were common and to ignore them. Getting the printer online probably was not the fault of the router as much as my not being able to get the printer on the already secured network. ...