Vous en avez un à vendre?

Grand interrupteur bouton-poussoir scie à table pour scies à table 35A/20A - 120V/230V - SW56

État :
Neuf
Plus de 10 disponibles / 841 vendus
Prix :
19,05 $US
Environ25,92 $C
Ayez l'esprit tranquille. Expédition et renvois gratuits.
Objet tendance. 841 acheteurs ont déjà acheté cet objet.
Expédition :
Sans frais Expédition standard. En savoir plussur l'expédition
Lieu : Vista, California, États-Unis
Livraison :
Livraison prévue entre le sam. 25 mai et le mer. 29 mai à 43230
Les dates de livraison approximatives – s'ouvre dans une nouvelle fenêtre ou un nouvel onglet tiennent compte du délai de manutention du vendeur, du code postal de l'expéditeur, du code postal du destinataire et de l'heure de l'acceptation et dépendent du service d'expédition sélectionné et de la réception du paiementréception du paiement - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. Le vendeur paie les frais de renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :231622180276
Dernière mise à jour : mai 13, 2024 05:54:57 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Features
Not Specified
Contact Material
Plastic, Metal
MPN
SW56
Maximum Amperage
35A
Smart Home Compatibility
Not Specified
Suitable For
Table Saws
Model
SW56
Coil Voltage
Not Specified
Application
Electronics
Current Rating
Not Specified
Current Type
Not Specified
Finish
Unfinished
Operation Method
On/Off
Brand
Superior Electric
Fuse Type
Switch
Smart Home Protocol
Clear Connect
Termination Type
Power
Switch Style
Push Button/Retractive
Type
Push Button Switch
UPC
099461749122

Description de l'objet du vendeur

Toolmarts

Toolmarts

98,3% d'évaluations positives
451K objets vendus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
4.9
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
4.9
Communication
5.0

Évaluations comme vendeur (113 758)

0***e (1056)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Great part, well packaged, and fast shipping, Thanks!
l***c (119)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Good
e***r (1001)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Happy
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.5
26 évaluations du produit
  • 19 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • OK, but has some issues........

    I'm using these to turn on and off magnetic starters for table saw, shaper, and router table motors. For this purpose, they work fine. Load is in milliamps, so not worrying about load on the switches. Some installation notes: 1- The mounting screws are not standard 6-32 machine screws and will not fit standard boxes. 2- the terminals are very small and will require sta-kon crimp terminals. I question that they would actually hold up under full nameplate load. 3- The faceplate and the switch mechanism must not be spaced out or it will not work. Faceplate and switch must be mounted tight, as it comes in the package. Note: I am a master electrician with 40+ years of experience, so can work around all these limitations and have a fully equipped shop!

    Achat vérifié : OuiÉtat : NeufVendu par : toolmart750

  • Cheaply made, poor design, impossible to mount by normal means

    Switch is lightly built, and has no means of mounting to either a cutout in a box cover, nor to any kind of box. There are no mounting holes provided in the facia or front cover of the switch to fasten it to a box or cutout in a panel or box cover. Size of terminals are small for the gauge of wire used for a 1-2 HP single phase motor. Switch functions OK when tested with an ohm meter, but overall construction seems marginal or light for the intended service. Still figuring out how to mount the switch, will likely have to make up a sheet metal box cover and either drill thru the facia for mounting screws. "You get what you pay for", and for the low price of this switch, this saying proved all too true.

    Achat vérifié : OuiÉtat : NeufVendu par : toolmart750

  • Switch can be used for more than table saws and should be listed as such.

    Switch works great. Easy installation. No special skills required for installation.

    Achat vérifié : OuiÉtat : NeufVendu par : toolmart750

  • Switch is too deep

    The depth of the switch was to great for standard electrical boxes. Even with a deep box, it was difficult to screw closed with the wiring.

    Achat vérifié : OuiÉtat : NeufVendu par : 3.eliyahu2

  • Table saw safety stop

    Took a bunch of modification to fit 4" sq. box plate to fit. Needs washers to space out switch from cover after grinding and filing. I used milling machine as there was quite a lot of metal and a tab. Then you need longer screws. It is being used as a knee operated stop switch in series with regular switch on table saw. Works great Will probably get another for band saw.

    Achat vérifié : OuiÉtat : NeufVendu par : toolmart750