Vous en avez un à vendre?

MOROSO 72300 HEI Distributeur Mechanical Advance Re-curve Spring Kit pour Chevrolet/GM

État :
Neuf
Plus de 10 disponibles / 1 336 vendus
Prix :
18,99 $US
Environ25,91 $C
Objet tendance. 1336 acheteurs ont déjà acheté cet objet.
Ayez l'esprit tranquille. Renvois acceptés.
Cueillette :
Cueillette locale gratuite depuis : Statesville, North Carolina, États-Unis. En savoir plussur la cueillette
Expédition :
Sans frais Expédition standard. En savoir plussur l'expédition
Lieu : Statesville, North Carolina, États-Unis
Livraison :
Livraison prévue entre le sam. 18 mai et le lun. 20 mai à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. L'acheteur paie les frais de port du renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :221595255720
Dernière mise à jour : févr. 28, 2024 10:28:00 HNEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Manufacturer Part Number
72300
Brand
Moroso
UPC
084663723001

Description de l'objet du vendeur

Heintz Sales/Heintz Brothers Auto

Heintz Sales/Heintz Brothers Auto

99,4% d'évaluations positives
138K objets vendus
Visiter la BoutiqueContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
5.0
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (45 089)

1***1 (18)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Works great
1***0 (563)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Muchas gracias por la entrega bien rápida y precisa.
e***. (146)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
I never did get my total timing to 36 but these got me closer than the originals that I had
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.8
41 évaluations du produit
  • 38 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Just the kit for your GM distributor!

    In short, I needed a new ignition for my 30 year old Ford F-150 (broken tabs and no more computer to control the advance). I found the answer ... someone had adapted a GM coil-in-the-cap distributor to a Ford 300 six ... awesome! One wire, vacuum and mechanical advance all for $90. Problem, the distributor needed to be set up for an old straight six engine. This kit did the trick. I actually was trying to take out some of the advance and get it more to where a stock engine would be. There are three sets of springs and a set of weights. With this kit, I think most people can set up their distributor to get the maximum advance without hitting the point where the engine "pings". I have seem a couple of kits ... this one seems to be one of the better ones ... quality of the items is ...

    Achat vérifié : OuiÉtat : NeufVendu par : heintzbrosauto1

  • Best curve kit for hei

    If you have an old GM hei or even a Chinese knock off hei. A Moroso hei curve kit is a must.I usually use the middle springs.All out race cars will take the light weight ones.While rv's and how rigs may like the heavy springs.Also these bushings are hard to find alone.The only negative is no picture of correct weight and center orientation.Get out your cell phone and take a pic of the old wieghts and center first.It will save ya.Google it and you will see some on backwards ....

    Achat vérifié : OuiÉtat : NeufVendu par : heintzbrosauto1

  • It is a good kit just needs a little work to make it fit the pins on the distributer

    After finding the bushing it needed I pressed it in to place in the arm and when I tried to put it back on the pin it would no longer fit. Was not a hard fix but you would think they would take in to consideration by pressing the bushing in the arm would shrink the hole thus making it not fit on the pin. Anyway I took a very small piece of sand paper and rolled it and sanded the hole back out.

    Achat vérifié : OuiÉtat : NeufVendu par : streetrays

  • An okay product.

    This product is a good product, but not for my application; it worked however in the Chrysler marine distributor; I only used the springs. I can't say more than that because I didn't use them for what they were intended

    Achat vérifié : OuiÉtat : Neuf

  • Good quality at a good price.

    With multiple sets of springs you can choose the one that’s correct for your application.

    Achat vérifié : OuiÉtat : NeufVendu par : heintzbrosauto1