Vous en avez un à vendre?

Véritable écrou pré-fendu Fender mélamine Stratocaster/Telecaster Strat/Tele

État :
Neuf
2 disponibles
Prix :
10,99 $US
Environ14,96 $C
Expédition :
5,00 $US (environ 6,81 $C) Standard Shipping. En savoir plussur l'expédition
Lieu : Warwick, Rhode Island, États-Unis
Livraison :
Livraison prévue entre le mar. 21 mai et le sam. 25 mai à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :204598276062

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
Fender
Type
Nut
To Fit
Electric Guitar
Position
Neck
MPN
099-4404-000
UPC
885978423118

Description de l'objet du vendeur

Dan's Music Center

Dan's Music Center

100% d'évaluations positives
1,0K objets vendus
Visiter la BoutiqueContacter

Évaluations et avis sur le produit

4.7
36 évaluations du produit
  • 31 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Enjoyable

Avis les plus pertinents

  • Great Fender product

    Great Fender product. String notches were perfect for my '93 American Strat. However, straight out of the pack it is too high for most players and keep in mind it is curved. I came up with the idea to use one of those thick nail files you can flex to fit the curve. Take your time and check it often. Easier to get it right rather than trying to build it back up!

    Achat vérifié : OuiÉtat : NeufVendu par : guitaraudio

  • good buy. don't glue it in or over sand!

    its just like its supposed to be. there's a curve that i assumed would have matched the neck. however, a previous builder glued the old nut in, which required a small chisel to get it out. Please don't glue your guitar nut or bridge to the guitar! When it needs replaced, it may break the whole thing. It's a crime to do that to a guitar. Anyway, the new nut works fine once it gets properly sanded to fit. Be careful not to over sand! Take your time and get it right!

    Achat vérifié : OuiÉtat : NeufVendu par : sporthitech

  • 9.5" Radius, Not 7.25" As Described

    The specs for this nut lead you to believe that it will fit a vintage style (1950s to early '80s) 7.25" radius neck nut slot. However, what you'll end up getting is a well made Melamine nut that's actually 9.5" radius top and bottom. To date, the Fender web page for this product still hasn't updated the change in spec. Besides that, it's a bit too wide for real vintage spec necks, being 1 11/6" instead of 1 5/8". All in all, a big disappointment. Nicely made though!

    Achat vérifié : OuiÉtat : NeufVendu par : arkansasmusicworks

  • Nearly perfect fit

    This was *nearly* a drop in replacement for a 2006 Mexi Strat. The width is 100% perfect. However, the length was a little long by a few millimeters. Just sanding down evenly on both sides and comparing to the original nut solved that, taking it nice and slow. Depending on what hoodoo you believe about nuts and what material they should be, at the very least this takes a Fender back to stock, and will almost always be a good fit. This solved the open string buzzing issue I had with both a stock and TUSQ nut, and now my guitar feels "right".

    Achat vérifié : OuiÉtat : NeufVendu par : guitaraudio

  • You can't get any Better

    I could not have ask for a better fit it is just right on my 2008 Special Edition Telecaster a Feeler Gage of 18 just slides under the 1st fret no adj of the Truss rod Capo on 1st fret a 12 feeler just slides under 8th fret 5/64 on the 6th string and 3/64 under the 1st at 17th fret pick ups 1/8 " from from bottom and top of both picks ups .Like I said just right Fender Lakeman

    Achat vérifié : OuiÉtat : NeufVendu par : guitaraudio

Il s'agit d'une enchère privée et votre identité ne sera divulguée à personne d'autre que le vendeur.