L'objet de cette annonce a été vendu le sam. 27 avr. à 11:50.
Vous en avez un à vendre?

NcSTAR AFNC 308 10 Round Stripper Clips (Pack of 20)

État :
Neuf - autre (voir détails)
Prix de vente :
19,00 $US
Environ26,03 $C
Expédition :
Sans frais Expédition standard. En savoir plussur l'expédition
Lieu : Kalona, Iowa, États-Unis
Livraison :
Livraison prévue entre le mer. 26 juin et le ven. 28 juin à 43230
Les dates de livraison approximatives – s'ouvre dans une nouvelle fenêtre ou un nouvel onglet tiennent compte du délai de manutention du vendeur, du code postal de l'expéditeur, du code postal du destinataire et de l'heure de l'acceptation et dépendent du service d'expédition sélectionné et de la réception du paiementréception du paiement - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :186408659843

Caractéristiques de l'objet

État
Neuf - autre (voir détails): Un objet neuf et inutilisé ne présentant absolument aucune trace ...
Number of Rounds
20
UPC
0814108013004
Brand
NcSTAR
Type
Stripper Clip
Model
NcSTAR AFNC 308

À propos de ce produit

Product Identifiers

Brand
NcSTAR
GTIN
0814108013004
UPC
0814108013004
Model
NcSTAR AFNC 308
eBay Product ID (ePID)
1901431444

Product Key Features

Type
Stripper Clip

Description de l'objet du vendeur

15jewels4

15jewels4

99,7% d'évaluations positives
5,4K objets vendus
Visiter la BoutiqueContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
5.0
Justesse des frais d'expédition
4.9
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (2 643)

s***a (7)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Arrived on time. Well packaged
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.0
50 évaluations du produit
  • 29 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 6 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 6 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 5 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • 7.62 stripper clips

    They are decent quality for the price. The only negative is that the clips are a little too wide for the cartridges. You need to take a pair of pliers and squeeze the clips with the cartridges installed in the clip to tighten the grip or they are a little too loose and might fall out. An easy fix on your first loading. After that they work great and all 10 rounds stay in place. Works great with the loader...very easy and quick to load your 20 round magazines.

    Achat vérifié : OuiÉtat : NeufVendu par : ecop!

  • poor quality control

    Only 2 clips out of 20 clips would retain 10 rounds of LC 7.62 brass; the rest would only retain 9 rounds. The last round would fall out laterally due to its own weight. Upon inspection I could see that the retaining lips on one end of the clips were flattened and unable to grasp the round and hold it in the clip. Measurement with a micrometer indicated that one end of each of 18 clips was 0.010-0.020 inches wider on the interior and exterior than on the rest on the clip. Enough so that the clip was well out of spec on that end. Using a tool to pry the lip away from the side rail and pliers to narrow the clip width I was able to bring the clip into spec so as to hold 10 rounds. Correcting the clips requires "micing" the interior and exterior dimensions and "truing-up" the clip; if ...

    Achat vérifié : OuiÉtat : NeufVendu par : ecop!

  • Stripper Clips

    None of these would fit the stripper clip guide on my M1A. Even if they did, the bullets fall right out due to the downright flimsy at best springs on the things. Package came half ripped open as I suspect the seller probably realized how crappy these things were and quickly pawned them off pn the next sucker to get his money back. The onky redeeming quality is that it onky cost $10, so it isn't as big of a waste of money as it could have been. Still a wastw though. Spend a little extra on NATO clips, or better yet, spare magazines. Absolutely disgusting.

    Achat vérifié : OuiÉtat : NeufVendu par : paintballsky

  • good product

    These are well made but they need a little adjusting on the ends with pliers to make it retain the rounds properly, that cost it one star but once adjusted they work perfectly with the NcStar .308 speed loader into both savage 10 round mags and HK 20 round mags loads them in a mear fraction of the time it takes by hand.

    Achat vérifié : OuiÉtat : NeufVendu par : etaguns

  • Little loose

    After reading all the other reviews I figured that these would be loose and need some "adjusting" with a pair of pliers. All works well afterwards. I can only say if you make a product that states it is for 308 or 7.62x51 then it should hold these rounds securely without needing any "adjustments" ! Just my take on it.

    Achat vérifié : OuiÉtat : NeufVendu par : allgungoods