Vous en avez un à vendre?

DOW U-428+ verre automatique pare-brise uréthane colle adhésive sans apprêt

État :
Neuf
Plus de 10 disponibles / 1 683 vendus
Prix :
17,50 $US
Environ23,98 $C
Ayez l'esprit tranquille. Expédition et renvois gratuits.
Objet tendance. 1683 acheteurs ont déjà acheté cet objet.
Expédition :
Sans frais Expédition accélérée. En savoir plussur l'expédition
Lieu : South El Monte, California, États-Unis
Livraison :
Livraison prévue entre le jeu. 27 juin et le lun. 1 juil. à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. Le vendeur paie les frais de renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :181354341944
Dernière mise à jour : juin 23, 2024 06:18:52 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Country/Region of Manufacture
Canada
Manufacturer Part Number
U-428 PLUS
Placement on Vehicle
Front, Left, Rear, Right
Brand
DOW
Manufacturer Warranty
Yes
UPC
688958859019

Description de l'objet du vendeur

Lilyautoglass

Lilyautoglass

99,9% d'évaluations positives
315K objets vendus
Visiter la BoutiqueContacter
Répond généralement en 24 heures

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
5.0
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
5.0
Communication
5.0

Catégories populaires de cette Boutique

Évaluations comme vendeur (47 790)

1***1 (702)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Worked good, able to reinstall the gas lift supports on my armada rear hatch. Still holding.
v***4 (85)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Received item thanks
x***s (1153)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Quality urethane. Thanks!
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.8
226 évaluations du produit
  • 195 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 24 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • I would buy this product again without hesitation. Dow chemical does not make junk, it's that simple.

    Very good product provided that you use a decent well built manual caulking gun or a battery operated one even better. Product needs to be warmed up for a while before usage because of it being a thick high viscosity sealant. It is a non -primer type sealant, no need for primer to be applied to the pinch weld area for a good adhesion to window. It can be used for window installs and other non- window uses also. Great product! Thanks DOW chemical, priced just right.

    Achat vérifié : OuiÉtat : NeufVendu par : lilyautoglass

  • Instructions/ advice needed

    I broke one cheap brand new caulk gun and bent a 2nd. Know that u need to drive down and get a heavy duty caulk gun and take the plastic tip with u so u can make sure it fits. (Bending the first caulk guns to get the tip in is what lead to them failing. Also I had bent the outer casing if the glue to get it into the 2nd gun) Then when u get home, open your car hood and place the glue in there to warm up for 10-15 minutes. Cold glue caused the first two caulk guns to break/bend. The glue would not come out! Used a heat gun and started to get a little. Then on the 2nd gun when i was squeezing it the glue blew out the back of the tube all over the caulk gun. Good thing I only needed one tube and was able to go get a new heavy duty gun that worked fine after hearing up the glue by letting it ...

    Achat vérifié : OuiÉtat : NeufVendu par : lilyautoglass

  • good stuff!

    i bought this stuff to use for an alternate purpose other than windshield install, and it worked great,. a little hard to use because it doesnt come with the little screw on nozzel that is shown in the pix, but i doubt that would help much, because the stuff is thick and it is all you can do to squeeze the caulking gun handle and dispense it without the nozzel anyway, i just pumped it on and spread it out with a putty knife, and the next day after it was dry i tried to pull some of it off to check the adhesion, and man was i surprised and how strong it was, i couldnt break it, and it wouldnt let go either,. great stuff. BUT, messy, it gets on everything you touch- and when you try to wipe it off it gets on everything else too, so be prepared to throw away your gloves, your clothes, and ...

    Achat vérifié : OuiÉtat : NeufVendu par : lilyautoglass

  • this is the stuff to use

    easy to use, sets quite well, but there is also plenty of time to position the glass. very strong rubbery bond. I even used a dab to fix my rearview mirror attatchment point in thecenter of my windshield and that has held quite well too.

    Achat vérifié : OuiÉtat : NeufVendu par : proautoglassllc

  • great product wear gloves hard to clean up

    i use this to glue moulding mirrors also lnstall wishields what i like most about urethane hest of summer dont effect holding power

    Achat vérifié : OuiÉtat : NeufVendu par : lilyautoglass