L'objet de cette annonce a été vendu le sam. 9 mars à 7:56 PM.
Vous en avez un à vendre?

White-Rodgers 21D64-2 HotRod LP/NG 120V Universal Hot Surface Nitride Ignitor

État :
Neuf
En rupture de stock / 3 vendus
Prix :
22,97 $US
Environ31,40 $C
Expédition :
6,87 $US (environ 9,39 $C) Expédition standard. En savoir plussur l'expédition
Lieu : Monroe Center, Illinois, États-Unis
Livraison :
Livraison prévue entre le ven. 17 mai et le lun. 20 mai à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. Le vendeur paie les frais de renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :156071936847

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Custom Bundle
No
MPN
21D64-2
Item Length
3 in
Country/Region of Manufacture
China
UPC
0786710529443
Compatible Brand
For Universal
Brand
White-Rodgers
Item Thickness
1/4 in
Type
Hot Surface Ignitor
Power Source
Corded Electric
Voltage
120 V
Model
21D64-2
Compatible Model
Universal
Year Manufactured
2009
Material
Silicon Nitride, Silicone, Silicon Carbide
Compatible Product
Central Furnace
Item Weight
0.7 lb

À propos de ce produit

Product Identifiers

Brand
White-Rodgers
UPC
0786710529443
Model
21D64-2
eBay Product ID (ePID)
7010594069

Product Key Features

Item Thickness
1/4 in
Power Source
Corded Electric
Year Manufactured
2009
Compatible Product
Central Furnace
Compatible Brand
For Universal
Voltage
120 V
Compatible Model
Universal
Material
Silicon Nitride, Silicone, Silicon Carbide
Type
Hot Surface Ignitor

Dimensions

Item Weight
0.7 lb

Description de l'objet du vendeur

TimesVideo

TimesVideo

100% d'évaluations positives
19 objets vendus
Visiter la BoutiqueContacter

Évaluations et avis sur le produit

4.7
36 évaluations du produit
  • 31 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 2 utilisateurs ont attribué une note de 1 étoiles sur 5

Good value

Would recommend

Good quality

Avis les plus pertinents

  • So inexpensive, its worth having a spare!

    I received the first 21D64-2 ignitor in a control board kit. I used it to replace the old 80V ignitor. That was over 5 years ago. Its burning bright to this day doing its job of igniting natural gas. I purchased a second identical unit as a spare, since nothing lasts for ever. I expect that it will perform much the same as the first, if I end up needing it during the life of my furnace (its almost 15 years old). The ignitor is a low cost unit, and seems a great value, and as such it makes sense to own a spare. The plumbing and heating repairman will drop by after midnight on a holiday and replace your burned out one for 16X the price of one of these. If you can wield a screwdriver, and apply a couple wire splices, you can install this.

    Achat vérifié : OuiÉtat : NeufVendu par : supplystuf

  • Great part to have on hand for a quick repair for a bad ignitor.

    These are great. I always keep on "in stock" at my house. Then when the igniter goes out, I can have my furnace back up and working in a half hour. This is a quick and easy repair and saves a service call. (This, of course, assumes you have some amount of mechanical aptitude and knowledge about how a gas furnace works. I assume no responsibility for you blowing yourself up.) Igniters WILL go bad. They sit in the flame always, so they will eventually burn through. I know that is true of the flat ones. They get brittle and crack. Maybe this new style will last longer.

    Achat vérifié : OuiÉtat : NeufVendu par : vman_29

  • Does it's job.

    This igniter is replacing a Robertshaw 41-413 that goes to a Carlin G3B burner. I had to make my own brackets for it, but I knew that when I bought it. The OEM Robertshaw igniter is almost twice the money and generally lasts less than 2 years. The Hot Rod has a 5 year warranty. We'll see how it goes. So far so good.

    Achat vérifié : OuiÉtat : NeufVendu par : supplystuf

  • Not quite universal but a good value.

    Not quite universal but a good value. I had to drill my access hole out to fit the igniter, but for minimal effort I got a much better igniter ( hope it lasts longer than the factory 2 years). It has more material, which I translate into longer life.

    Achat vérifié : OuiÉtat : NeufVendu par : supplystuf

  • Easy to install, works perfectly

    The ignitor was easy to install, instructions were clear (with pictures). The ignitor fixed the problem. I used it to replace an IGN00054 ignitor.

    Achat vérifié : OuiÉtat : NeufVendu par : eagle197579