Vous en avez un à vendre?

SBC LS1 LS3 Pontiac 301 400 455 403 Piston Stop TDC Top Dead Center Tool

Dernier exemplaire disponible
État :
Neuf
Le dernier / 95 vendus
Prix :
10,45 $US
Environ14,31 $C
Objet tendance. 95 acheteurs ont déjà acheté cet objet.
Ayez l'esprit tranquille. Renvois acceptés.
Expédition :
5,99 $US (environ 8,20 $C) Expédition standard. En savoir plussur l'expédition
Lieu : Pompano Beach, Florida, États-Unis
Livraison :
Livraison prévue entre le mer. 29 mai et le lun. 3 juin à 43230
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30jours. L'acheteur paie les frais de port du renvoi. En savoir plus- pour en savoir plus sur les renvois
Paiements :
     

Magasinez en toute confiance

Garantie de remboursement eBay
Recevez l'objet commandé ou obtenez un remboursement. 

Informations sur le vendeur

Inscrit comme vendeur professionnel
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :133965614267
Dernière mise à jour : mai 23, 2024 10:37:41 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
ProForm
Type
Top Dead Center Tool
Warranty
1 month
Manufacturer Part Number
66792
Country/Region of Manufacture
Unknown
UPC
Does not apply

Description de l'objet du vendeur

Nook and Tranny LLC

Nook and Tranny LLC

99,4% d'évaluations positives
155K objets vendus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description
5.0
Justesse des frais d'expédition
4.8
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (61 047)

_***3 (206)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Great ebayer. Would buy from again. Fast delivery
f***a (1233)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Just as described...fast shipping. PERFECT..Thanks!
h***i (403)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Quality item and fast shipping
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.3
34 évaluations du produit
  • 26 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 2 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 2 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Positive piston stop

    With the addition of a locking nut under the slotted head of the screw, and a degree wheel, I was able to set up the timing on a '67 Triumph Bonneville that had no other marks or locators for TDC. Fits 14mm plug hole (13/16" hex flats)

    Achat vérifié : OuiÉtat : NeufVendu par : espeedshop

  • It's acceptable

    It's OK. However insert is a little bit loose in the threads, but stays in place. The center bolt end is finished with the threads, I prefer a rounded tip, which I grinded into it. In the end it worked, so I'm satisfied.

    Achat vérifié : OuiÉtat : NeufVendu par : supershops

  • Did not work on a Chevy SBC

    I found this tool to be useless on a Chevy 350 build. With it installed in number one cylinder and using a 16" ratchet I rotated the engine a full revolution and felt nothing. When I removed the stop tool, I found it to be bent but I never even felt any resistance. I then inserted an 18" section of 5/16 fuel hose into the cylinder rotated it until the piston stopped marked the location then rotated it in the opposite direction until it stopped again marking the location then removed the hose and brought it around till the pointer was exactly in the center of both marks and had perfect top dead center all with a piece of used hose that cost nothing, wish I had thought of that before I wasted my money.

    Achat vérifié : OuiÉtat : NeufVendu par : speedunlimited_sales

  • easy to use

    Just make sure you screw the stop in far enough. Great to use on an old engine when you aren't sure if the mark on the balancer is correct, or it's worn off entirely.

    Achat vérifié : OuiÉtat : NeufVendu par : tennessee-performance

  • Great product, great price

    Great product but unfortunately it doesn't work for my truck. Too small.

    Achat vérifié : OuiÉtat : NeufVendu par : supershops