redbox177 sur eBay

À propos

Lieu : États-UnisMembre depuis : 20 août 2008

Évaluations

12 derniers mois

Positives0- évaluations positives au cours des 12 derniers mois

Neutres0- évaluations neutres au cours des 12 derniers mois

Négative0- évaluations négatives au cours des 12 derniers mois

Toutes les évaluations (38)

collectablebitz (2806)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Fantastic Ebayer prompt payment AAA+++
valuedtrustful (52761)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Great !!!
babeisland (49866)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Good buyer, prompt payment, valued customer, highly recommended.
mrsclickclick (2145)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
quick payer all OK
belcars_deals (7141)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Good buyer, prompt payment, valued customer, highly recommended.

Afficher toutes les évaluations

Avis (2)

Switchmate: One-Second Installation Smart Lighting, Rocker, White

04 janv. 2017

Great idea; too bad its not reliable.

I bought one of these to just to see how well they work. This unit is held against the switch plate with two strong magnets at the mounting plate screws. There is a motorized actuator that travels up and down to actuate the switch. The problem is that after the actuator moved the switch did not fully move enough to toggle or Switchmate was pushed away from switch. I tried 3 different wall switches and only one worked reliably. The problem may be that my wall switches need to b aligned or shimmed to work properly. But who is going to do that?

Bench Top Mini Drill Press 5 Speed for Wood or Metal Hobby Table Top FREE SHIP!

09 mai 2017

There are better machines available.

There are a number of machines that have more features that cost just a few dollars more. Here are some of the shortcomings I found. The table tilt is not easily adjusted without a socket wrench and has no detent to return it to 0 degrees. Table height does not have an adjustment crank. You simply loosen the table clamp and slide the table up and down the column by hand. The depth stop is probably the worst feature on this machine. It consists of a threaded bolt and nut attached to the drill chuck by a plastic clamp. This set setup deflects easily so that your never quite sure how far you have drilled. If your looking for a low cost machine then this will fit the bill. But for a just a few dollars more you can find machines that have more features and that you will be happy with and not disappointed in your purchase.

1 personnes sur 2 ont jugé cet avis utile.

Afficher tous les avis