À propos
Toutes les évaluations (890)
- fluentpower (1334)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéGood buyer, prompt payment, valued customer, highly recommended.
- stevens2122 (3253)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- dbrost5 (626)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéQuick response and fast payment. Perfect! THANKS!!
- davidp9531 (3056)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéQuick response and fast payment. Perfect! THANKS!!
- *****- Évaluation laissée par l'acheteur.Six derniers moisAchat vérifiéGood buyer, prompt payment, valued customer, highly recommended.
- arteis (4823)- Évaluation laissée par l'acheteur.Six derniers moisAchat vérifiéFast Payment! Great Ebayer!
Avis (5)
02 sept. 2020
Good value stand
For the money, hard to beat. Instructions lacked any real help but easy enough to figure it out. Rolls nice, all metal parts are zinc plated, carpet bunks are nice.
25 juil. 2018
Survived a 700mi roadtrip without issue
Replaced the original front wheel bearings in my 2001 MDX with these. They arrived well packaged but not in branded packaging or with any literature. I pressed the bearings and hub flanges into place; and you do need to pay attention to the orientation that your original bearings were in the hubs so the ABS sensor functions properly. Just completed a 700mi road trip with new bearings in place and they are running smooth. I do not know long term how they will hold up, but they sure are a big initial cost savings over my local parts store, I could not buy the bearings alone for what the bearings + hubs cost.
12 juil. 2018
Complete kit for the DIY'er
Geniune Mikuni parts for your Mikuni carburetor. Hard to go wrong there; its like the parts were actually made to fit what you're working on.
Disassembled, cleaned, and reassembled carbs on my 951 Sea Doo RX. Ski now starts easier and runs great!
Most important on the 951's, it comes with new inlet filters! I had replaced all that decaying grey Tempo fuel hose a few years ago along with the inlet filters. Pulled apart again, and mine were still half-plugged when I pulled it apart. Something to be mindful of, since fuel starvation and 2 strokes rarely ends well.
This kit does not include the carburetor flange gaskets to seal between the carbs and the intake flange, you will need to get those separately. Other than that, if you are considering doing the carbs on your old 951 Rotax, DO IT so you at least know the inlet filters are not a pending engine meltdown waiting to happen.