ebbishvs sur eBay

À propos

Lieu : États-UnisMembre depuis : 27 oct. 2008

Évaluations

12 derniers mois

Positives7- évaluations positives au cours des 12 derniers mois

Neutres0- évaluations neutres au cours des 12 derniers mois

Négative0- évaluations négatives au cours des 12 derniers mois

Toutes les évaluations (932)

mxpowerplay (67347)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Thank you. A pleasure to do business with.
ccairon (1810)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
A+
jiangyo68 (1296)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Great communication. A pleasure to do business with.
chaparralmotosports (276967)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Quick response and fast payment. Perfect! THANKS!! A++++
stevbmi (82743)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
the-d-zone (38443)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Quick response and fast payment. Perfect! THANKS!!

Afficher toutes les évaluations

Avis (15)

iMAX B6 Digital LCD Lipo NiMh Li-ion Ni-Cd Battery Balance Charger Discharger US

31 juil. 2017

Clone tested perfectly!

Read and watched reviews of this clone charger after purchasing. I performed testing on NIMH and LIPO cells, all voltage and current measurements stated by the charger were very accurate to my fluke 87. This particular clone is good and I do recommend it!

2PCS 5V Micro USB 1A 18650 Lithium Battery Charging Board Charger Module ID

03 mars 2018

Purpose unknown during testing

Performed multiple tests on the charging of a 18650 battery. The battery charged okay except slight over charging to 4.22V but when hooked to a load on the out terminals the batterys voltage did not come out until the battery was at 3.8V and the load stayed on all the way to 1V. Not sure about the purpose of this module.

NEW MOTION PRO Valve Seal Install 4 pc. Tool Set

24 juil. 2018

Great took you never thought you needed

I have been rebuilding cylinder heads on 4 stroke dirt bikes for about 4 years now and I have always struggled with installing valve steam seals. I used to size up the seals with a quarter inch drive deep socket and turn the head upside down to install the seals on the guides. With these you can load all 4 seals on the took at once and just align/ push the seals right on one at a time! Awesome tool!

Afficher tous les avis