À propos
Toutes les évaluations (1 506)
- *****- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéGreat communication. A pleasure to do business with.
- beautynhomeessentials (705)- Évaluation laissée par l'acheteur.Dernier moisAchat vérifiéGood buyer, prompt payment, valued customer, highly recommended.
- liyanabeauty (1166)- Évaluation laissée par l'acheteur.Dernier moisAchat vérifiéGreat communication. A pleasure to do business with.
- nifty_hogwash (3780)- Évaluation laissée par l'acheteur.Six derniers moisAchat vérifiéGood buyer, prompt payment, valued customer, highly recommended.
- jimmy2420 (1907)- Évaluation laissée par l'acheteur.Six derniers moisAchat vérifiéGreat Buyer!!!! Hope to deal with you again!!!!!!
- sutlo (1741)- Évaluation laissée par l'acheteur.Six derniers moisAchat vérifiéEXCELLENT! THANKS FOR A SMOOTH DEAL!!
Avis (7)
03 nov. 2015
Great 50 ohms vertical input module
The Tektronix 7A24 is a 400 MHz dual-channel vertical plug-in for 7000-series scopes with (fused) 50 Ω BNC inputs.
The 7A24 would typically have been used in 7834, 7844 or 7854 mainframes. The recommended probes were the P6056 and P6057.
The 75 MHz 7A18 and 200 MHz 7A26 share the same front panel layout and operation (but have 1 MΩ inputs).
25 oct. 2015
These are very precise and stable PSU with high resolution in the microvolt range
The Tektronix PS5004 is a programmable precision power supply plug-in for the TM5000 system. It operates in TM5003 or TM5006 mainframes. The maximum output power does not change when operated in the TM5006 high power compartment.
The output range is 0 to +20.0000 V, settable in 500 μV steps. Output current can be adjusted from 5 to 300 mA in 5 mA steps. A 4-2/3 digital meter monitors can be selected to monitor the actual output voltage, output current, or current limit setting. Results are displayed on the front panel LED display, and can be read through the GPIB.
The power supply has a basic DC accuracy of 0.01%, better than many 4½ digit DMMs. It can be used as a programmable calibration source for many 3½ digit meter applications. To maintain the precision at the point of use, the outputs have remote sensing inputs. Internal resistors clamp the sensing inputs to the output terminals, allowing the supply to be used with the sensing terminals left open.
The power supply used a unique method of programming the voltage. At the time the instrument was designed, 16 bit DACs using conventional R-2R ladder networks were rare and extremely expensive – more than the target manufacturing cost for the entire instrument. The DAC uses a gated charge transfer technique, and is implemented from discrete components. The output of a negative precision current source is steered either into the summing node of a current to voltage converter, or pulled up to a supply voltage. The switch is driven by a digital logic which forms a constant period, variable pulse width waveform. A digital counter determines the pulse width, with each count representing the weight of a least significant bit. An integrator, followed by a four pole quasi-elliptical filter tuned to the pulse frequency reduce the ripple to less than 100 μV.
12 nov. 2019
I like-it
I Like-it