À propos
Toutes les évaluations (1 395)
- amsracing (50736)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéGood buyer, valued customer, highly recommended. Thank you --->AMS Racing<---
- theperfectpart (949068)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéGood buyer, prompt payment, valued customer, highly recommended.
- extremelastingtokens (2113)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéGreat communication. A pleasure to do business with.
- supershieldz (529303)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéQuick response and fast payment. Perfect! THANKS!!
- hard2findrvpart (12033)- Évaluation laissée par l'acheteur.Il y a plus d'un anAchat vérifiéQuick response and fast payment. Perfect! THANKS!!
- henison-us (2467)- Évaluation laissée par l'acheteur.Dernier moisAchat vérifiéThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Avis (22)
12 mars 2017
Saved the day!
After grouting my 400 sf kitchen/hall, I realized that the grout was two different shades (different lots). The grout company sent me 4 bottles of Aqua Mix and I was able to recolor to match. The easiest way to apply is to scrub the grout*, then apply with your finger(s) while wearing rubber gloves and wiping the excess with a wet rag or sponge. Trying to 'paint' each grout line is horribly time consuming and inaccurate. With my method, I was able to do 25 sf of 12" tiles in 20 minutes. 400 sf took 6 hours to complete, but it looks great and used less than 2 bottles.
* I cleaned the grout with a solution of 10 parts water to 1 part muriatic acid and a stiff brush. Wear high gloves and eye protection. Works really well.
22 avr. 2020
Puts out good light, but may go dim.
I bought four of these and while they work well, two of them lost some leds after about a month.
11 juil. 2018
Good unit for the money, but...
2 personnes sur 2 ont jugé cet avis utile. Off brand RV toilet but pretty good for the price. High profile, a large bowl and soft-close lids! Easy to install... except for the supply inlet not lining up with the old water line. If replacing a standard height unit, you will need an un-threaded PEX right angle fitting that accepts tubing on both ends and less than 1' of extra tubing (RV supply NOT home imrovement store). Note: this tubing was difficult to push on the fitting, but I used a little WD40 and a some muscle. You will also need two larger washers for the hold-down bolts (brass or stainless preferred) as only nuts with a small flange are included. They will work alone, but I din't think they were big enough. Modification made: the top lid fits VERY flush and is difficult to lift. I carved out some of the plastic near the front left side to make a spot to get my finger under, but the actual seat has an easy lift feature.