Shop by category

    À propos

    Lieu : États-UnisMembre depuis : 15 oct. 2004

    Toutes les évaluations (1 059)

    • georgeallen05 (3995)- Évaluation laissée par l'acheteur.
      Il y a plus d'un an
      Achat vérifié
      Great communication. A pleasure to do business with.
    • reflectionsoftrinity (33692)- Évaluation laissée par l'acheteur.
      Dernier mois
      Achat vérifié
      Hope to deal with you again. Thank you.
    • lcsarishop (96)- Évaluation laissée par l'acheteur.
      Dernier mois
      Achat vérifié
      Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
    • surginstruments (136061)- Évaluation laissée par l'acheteur.
      Dernier mois
      Achat vérifié
      Thanks valued customer..With your support we have achieved another milestone
    • med_bargains (38419)- Évaluation laissée par l'acheteur.
      Dernier mois
      Achat vérifié
      Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
    • armyuniverse (248194)- Évaluation laissée par l'acheteur.
      Dernier mois
      Achat vérifié
      Thanks for ordering from Army Universe Military Store Shop!
    Avis (25)
    Air Compressor With 6 Liter Tank 150 Psi Dc 12v Train Horns Truck Rv 1.6 Gallons
    07 avr. 2023
    Cheaply Made, Needs Safety Upgrades!
    With a little work this could be a good compressor. As it ships, it's kind of crappy. The compressor itself is very loud. There's not much you can do about that. THERE IS NO SAFETY VALVE! I highly recommend you get a brass T & install one! This uses an HVAC type limit switch. The current draw on the compressor really pushes the current limits of what this switch was designed to handle. I suggest you get a 12v contactor to drive the compressor. The contacts on these limit switches are known to weld themselves in the "On" position when overloaded. This is why I suggest a safety valve so strongly. If the switch sticks on, you'd better hope the compressor motor burns out before the tank explodes. At the very least, you should get a second switch & run them in series in case one fails. The wiring is way too light & overheats. You'll need to upgrade the wiring, which will require taking off the end of the compressor motor. The condensate drain is just a simple plug. Do yourself a favor & install a valve. Once you make all those corrections, you'll have a decent, but loud, compressor.
    NEW 80 LB 80lb ALUMINUM ARCHERY HUNTING PISTOL CROSSBOW + 3 x ARROWS BOLTS
    17 août 2018
    Cheap Plastic Junk!
    The body of these crossbows is NOT aluminum as advertised. It's just cheap plastic. In fact everything on this crossbow is made of cheap plastic. The little spring finger that's supposed to hold the bolt in place is even plastic & doesn't hold anything. They don't even give you a cable stringer so you can get the bowstring on, which is actually a good thing. The prod is just made of cheap, hard fiberglass which would probably snap if you ever managed to get this thing strung & cocked it. You can twist & flex the body with your hands, so I'd hate to see what this thing would do under 80lbs bowstring tension. These things aren't just junk, they're unsafe!
    AdirPro Prism Pole Bipod Thumb Release Range Yellow 760-02, Surveying, Topcon
    27 août 2019
    Good For The Money
    The leg hinges are made of plastic, so a little care is needed handling it. Otherwise, it's a good bipod for the money.

    À propos

    Utilisez cet espace pour vous présenter aux autres membres eBay et parler de vos passions. Incitez les autres membres à s'abonner à vos publications!1/1000