Avis sur le produitZebra GX43-102510-000 GX430t Thermal Printer

Miss direction.

It says in the description that the draw weight range is 5 to 30 lbs. anything less than 25 lbs on this bow the is massive slack in the cable not string. Also it says the draw length ranges from 12” to 26” I believe. Srry but it doesn’t adjust at all. It’s about 18. Both my daughters at 9 and ten can’t fully draw. I do not recommend this bow for any age. Very disappointed. Worst Bear product I’ve ever owned. I may never buy from Bear again.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : crossbowshoppe

Not a good choice for little tots.

I bought this bow for one of two granddaughters. For the other I bought the Brave by Golden Eagle. I have been a Bear fan all my life (I am 68 y/o). This bow has ONE draw length, don't believe the range listed. Try pulling an adult compound bow back half way!. If you let up on the draw weight the stings are sloppy. My 10 y/o granddaughter cannot pull it back, but the draw length is already too short! and that is the problem with this bow, the draw length to draw weight ratio is just wrong for children. I also am teaching a 10 y/o boy whose dad bought him the same bow, and I am finding the same problem with him. Again you should not have to flex you bow hand 45 degrees or more to be able to anchor to your face at full draw. Nor really sure what to do with this bow. I have no experience with the Vortex bows but if what they claim is true they may be a better choice. The whisker biscuit is a PLUS for any of these bows for children!Lire l'avis complet...

Achat vérifié : Non

Great for shipping! Free software if you call zebra!

Great product, free software for creating labels. We sell and ship auto parts, works great at printing shipping labels. This is a thermal printer so it only prints in black and white, if you want color you have to buy an attachment and an ink cartridge for it. Extremely easy to change labels! A little expensive, but has been working for us for the past 3 years with out any issues.Lire l'avis complet...

The best 10" subwoofers I have ever heard without a doubt!

I will try to make a long story short. I have a 2010 Chevy Silverado Ext cab truck with very limited space for subs. I purchased a "under-the-seat" enclosure from a seller on e bay for two 10" subs. I looked all over the internet from the very best 10's according to people's feedback and reviews. The JL Audio 10W3V3-4's kept popping up. The mounting depth is the main limiting factor in the under the seat enclosures for the 2007 and up Chevy trucks. The box I found said it had 6" of mounting depth (which was a LIE). These call for 5 7/8" clearance. I had to have custom spacers made to make them fit, but it was WELL worth the aggravation! I have them powered by a ALPINE MRX-M110 1100 watt RMS amp. Pushing 550 watts to each sub (gain is only half way up) and they sound as good as the majority of the 12" subs I have listened to. The bass is extremely tight, accurate, and "punchy". These are well worth the money in my honest opinion. If you like distorted "rap-type" bass then these probably are not for you. If you listen to country or rock/rock and roll then these are just what the doctor ordered.Lire l'avis complet...

Great Printer!

Useful for both Direct Thermal and Thermal Transfer. Make sure to get the right size thermal ribbon, there's only option, unlike the many sizes of labels this printer supports.

Achat vérifié :  Oui | État : occasion | Vendu par : bidder_printer

Draw weight too strong for the draw length.

Bought for my granddaughter, 9 y/o. She has a hard time pulling it back and the let off is within an inch or two of full draw, which I measure only 18 inches and is already too short for her. I doubt that any child could draw back and hold at any shorter draw length as it is relatively hard for a child, prior to the let off at full draw. I see no way to "adjust" the draw length. The cables become very floppy and with continued use at less than full draw weight I would suspect would probably slip off the cams. At full weight and full draw the bow does shoot well, with good flight of the arrow. I think the mix of the draw weight and draw length of this bow make it difficult for use in the targeted age group. (BTW: I am a BEAR bow fancier and have 4 of my own.)Lire l'avis complet...

Achat vérifié : Non

Some perks but still a good printer.

I'm using which is supposed to be a high quality zebra resin ribbon but the print seems to mess up every 3 or 4 prints (like a wrinkle on the ribbon which transfers to the label). Besides, if i use continous printing each label starts to come out lighter and lighter so i have to print label by label with a pause of aroun 1 or 2 secs between labels so the ribbon will correctly stick to the label. Also calibrating the label alignment is not as easy as shown on videos if you want a perfectly centered image in the label. But still is a good printer for my application where i don't need high quantity of labels on short times. Lire l'avis complet...

Achat vérifié :  Oui | État : occasion | Vendu par : surpluspartsstore

Perfect for beginning archers

Excellent little starter bow, bought it for my 8 year old daughter. Had no problems adjusting the draw weight to suit her, 10 minutes and she was ready to shoot. The armguard could be a little bigger but otherwise this is a very nice starter set. Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : walnutcreekoutd...

Workhorse label printer

Excellent, small-footprint printer, labels print in seconds.. Available label software from Zebra, while not Adobe Photoshop, is easy to use and has label presets so little set-up needed.

Achat vérifié :  Oui | État : neuf | Vendu par : ues984

price and draw weight and length

shortest draw of any light weight bow on the market

Achat vérifié :  Oui | État : neuf | Vendu par : walnutcreekoutd...