5étoiles
19évaluations4étoiles
3évaluations3étoiles
3évaluations2étoiles
0évaluation1étoile
1évaluation
Would recommend94% J'accepte
Good value93% J'accepte
Good quality93% J'accepte
22 avis
OK, but has some issues........
I'm using these to turn on and off magnetic starters for table saw, shaper, and router table motors. For this purpose, they work fine. Load is in milliamps, so not worrying about load on the switches.
Some installation notes: 1- The mounting screws are not standard 6-32 machine screws and will not fit standard boxes. 2- the terminals are very small and will require sta-kon crimp terminals. I question that they would actually hold up under full nameplate load. 3- The faceplate and the switch mechanism must not be spaced out or it will not work. Faceplate and switch must be mounted tight, as it comes in the package. Note: I am a master electrician with 40+ years of experience, so can work around all these limitations and have a fully equipped shop!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
Cheaply made, poor design, impossible to mount by normal means
Switch is lightly built, and has no means of mounting to either a cutout in a box cover, nor to any kind of box. There are no mounting holes provided in the facia or front cover of the switch to fasten it to a box or cutout in a panel or box cover.
Size of terminals are small for the gauge of wire used for a 1-2 HP single phase motor.
Switch functions OK when tested with an ohm meter, but overall construction seems marginal or light for the intended service. Still figuring out how to mount the switch, will likely have to make up a sheet metal box cover and either drill thru the facia for mounting screws.
"You get what you pay for", and for the low price of this switch, this saying proved all too true.
Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
Switch can be used for more than table saws and should be listed as such.
Switch works great. Easy installation. No special skills required for installation.
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
Switch is too deep
The depth of the switch was to great for standard electrical boxes. Even with a deep box, it was difficult to screw closed with the wiring.
Achat vérifié : Oui | État : neuf | Vendu par : 3.eliyahu2
Table saw safety stop
Took a bunch of modification to fit 4" sq. box plate to fit. Needs washers to space out switch from cover after grinding and filing. I used milling machine as there was quite a lot of metal and a tab. Then you need longer screws. It is being used as a knee operated stop switch in series with regular switch on table saw. Works great Will probably get another for band saw.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
safty switch
designed well and to be safe . A very good price to make something a lot safer. than the original toggle switch
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
Good power tool switch
Good switch for power tools allowing easy shut off.
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
Good replacement switch
It works perfectly but I did have to drill my own holes in the corners to mount it. Not a big deal.
Achat vérifié : Oui | État : neuf | Vendu par : piedmonttool
ok
wire connection could be improved
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750
Great replacement switch
Great replacement switch for my bandsaw. Start button is a bit hard to push but it does work. Other than that it is a great switch.
Achat vérifié : Oui | État : neuf | Vendu par : toolmart750