5étoiles
4évaluations4étoiles
2évaluations3étoiles
1évaluation2étoiles
2évaluations1étoile
0évaluation
Would recommend62% J'accepte
Good value75% J'accepte
Good quality85% J'accepte
8 avis
High quality, but spools don't fit
I own a Stonfo dubbing spinner that I like very much- high quality and excellent functionality. So, I had high hopes of getting my hands on a Stonfo bobbin. I was very disappointed. Although the bobbin/threadholder was of high quality and nicely made, it became clear after some trials with several different threads, that this bobbin (at least the one that I received) was not built to accommodate standard US thread spools. Rather, it appeared that it was intended for spools smaller in width. With standard thread spools installed (e.g., Danville, UTC, UNI, etc.), the rim of the spools actually rubbed against the metal arms of the bobbin. I found this bobbin unusable, so returned it. (I own and use 7 or 8 bobbins of various makes, none of which show this kind of problem.) Of course, it's possible I received a defective bobbin!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : avidmaxoutfitters
It's worth the $11.00, but could be better.
The light weight, nose tube and thumb grip are good.
It needs a clutch for the spool like the more pricey bobbins.
If it had a clutch that actually stayed where you set it (unlike the more pricey ones which don't) it would be superior.
Add something like the adjustable drag on a fishing reel - it's just a coil spring added to an existing clutch style. It already has a through spindle so; the main feature is there now.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : theflytier
Does not fit standard spool
The bobbin size is mis-leading, a standard spool does not fit correctly, the wire has to be bent so the spool does not sit against the wires. The bullet spool holders sit at such an angle they do not allow the spool to spin freely so I had to bend the wire to accommodate a standard spool. I did see this in previous reviews should have paid attention.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : avidmaxoutfitters
Great traditional style wire bobbin holder that doesn't fray thread.
this is a great traditional style wire bobbin holder, despite what the other reviewers are saying... it's tube doesn't fray even my finest thread (Gordon Griffiths 14/0 and gutermann skala 360), the wire legs fit all my thread spools from 3/4 to 1 1/2", (including UTC, UNI, and Danville) when I take the time to adjust the bobbin holder for them. it's contact pads are well finished and its a matter of seconds to tweak the legs and pads to fit and provide the tension I'm after, often with just my fingers not even needing to use pliers. If your spools are standard size or smaller then you can use this sized bobbin holder.
for those that are not used to this style of bobbin - If you find the wire legs are dragging on your spool you slightly bend the knee of the leg inwards and that will add clearance for your spool. if the tension is too high slightly spread the entire legs wider. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : flyartist
My favorite!
The best I've used. They're simple, cheap, and made of quality materials. I particularly like that they're relatively short so even with a little extra thread out, they hang.
Achat vérifié : Oui | État : neuf | Vendu par : avidmaxoutfitters
Stonfo Bobbin Holder
Good quality bobbin holder - a little smaller than some so check the specs. Does still accomodate normal bobbins.
Achat vérifié : Oui | État : neuf | Vendu par : avidmaxoutfitters
Stonfo Bobbin Holder
Very good quality and doesn’t shred thread like some bobbin holder do.
Achat vérifié : Oui | État : neuf | Vendu par : flyartist
Stonfo Bobbin
nice feel and firm in your hand
Achat vérifié : Oui | État : neuf | Vendu par : theflytier