5étoiles
25évaluations4étoiles
2évaluations3étoiles
0évaluation2étoiles
0évaluation1étoile
1évaluation
Would recommend96% J'accepte
Good value96% J'accepte
Enjoyable96% J'accepte
26 avis
Looks awesome on my 2018 Fender Players Series Telecaster
11/06/2019: Fits perfectly on my Fender Telecaster, and looks great. But, keep in mind that it is only stainless steel plated over brass for the pickguard, bridge, and control plate. No it is not solid stainless steel. If you scratch it deeply, you will see the brass. Also, you seek good "intonation to be as close as possible, do not use standard round barrels that come with the bridge for the strings. Instead, buy a set of "compensated" barrels, and you will get the good intonation on all strings at 12th fret. Suggestion, set the bottom "E-A" barrel as close as you can to the back of the bridge, then the 2nd barrel (“D-G”) slightly closer to neck, then the 3rd barrel (“B-E”) slightly closer to the neck then the 2nd barrel. WARNING: Only do this with very lose floppy strings. When done, then Tune your strings and set intonation at 12th fret. If intonation is not correct DO NOT move barrels (forward or back) with tension on strings. The two little barrels adjustment screws for the height of the barrels will dig into the steel plating and you will see the brass and have deep gouged out scratched in the plating. Be patient and loosen strings a lot, then move barrels and retune. Do this over-and-over again until you get your perfect intonation. Lastly, getting string height do the same procedure. Loosen strings raise or lower barrels with the two little screws on each barrel, then retune. If you are not patient and do this, you will be very unhappy that you damaged your bridge plate with deep ugly scratches showing the brass. I know, because I was not patient, and moved the barrels with tension on the string and ruined the steel plating on the bridge, then I had to buy a second bridge and do it the right way. Over-all, I recommend this product, but be careful installing it. PS: in my photos, I have not set intonation and I did not change out the round barrel to "compensated" barrels yet. Enjoy, tgLire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
An effective and beautiful addition to your Gibson!
This beautiful nickel-plated TP-6 tailpiece was originally invented by one of my earliest mentors, Milt Owun, master luthier, working upstairs at Barney Kessel's Music World, an iconic music store in the Hollywood of my early teens, which was a Gibson 'showcase' store of considerable renown. He also had designed TP-6 versions that were part of a 'trapeze' tailpiece assembly, but they, and other prototypes, have since disappeared. Fortunately, Norlin latched onto this one!
The superbly-crafted TP-6 was standard equipment on many 1970s Gibsons during their 'experimental' era, such as the innovative L-6S, and they were optional on certain Les Pauls and ES-series electric guitars.
Not only does this tailpiece let you zero-in on micro-fine tuning similar to a Floyd Rose, without bothering the 'big' tuners and dealing with friction at the nut vs. the break-over angle of the headstock, but it also adds resonant mass to the 'stud' tailpiece. This gives whatever axe you're using noticeably more natural sustain and resonance, and additionally shortens the effective string length by almost an inch, making the guitar that much easier to fret! Thanks, Milt!
The Epiphone TP-6 comes with studs and metric-threaded stud screws, but, no worries; it fits perfectly on your existing Gibson SAE-threaded tailpiece studs! Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
Great saddles at an amazing price!
Took a chance at this price, and it paid off big. Really good saddles that for me intonated as well as any 6 saddle bridge I have. And they sound great! Unless you are really close, they look like regular brass barrels. Really well done and saves a bundle over the more expensive (and likely the same) options.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
This is heavy , but looking is more valuable !
If you want bright tone, using this brass material is one of solutions .
If you want that your guitar is more cool than your friend’s one, changing color chrome to gold is good idea !
If you want more comfortable in light weight, so sorry, I recommend to search another bridge.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
Well worth the money!
A decent TP-6 for a decent price. Remember, this is not a Gibson Vintage TP-6, or even a current Gibson TP-6. But, for a less expensive guitar, it sure works great. Feels solid, tunes correctly. It absolutely brings back memories of my old 1980 ES-335 CRS.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
It's a beautifully machined brass claw
I needed to replace the claw on my guitar. While searching I found this piece for an affordable price. It's awesome! Beautifully machined and has some mass to it unlike stamped pieces that come with most guitars. I plan on picking up a few more. You can't go wrong!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
Quality brass tele style bridge.
Solid, with some heft. Build quality exceeded expectations. Rounded edges are easy on the picking hand. Very nice!
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
Excellent, inexpensive solid brass, grooved perfectly. What more do you need!
Classic look, sound and feel!
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
Good fit
Good quality
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711
great brass saddles
Great product. I love the rounded ends of the outside saddles. Solid brass compensated saddles for a tele bridge.
Achat vérifié : Oui | État : neuf | Vendu par : goodbuy711