Moen 1222 Single-Handle Posi-Temp Replacement Cartridge

It fits and works!

I'm getting good at changing these things, we have 3 showers and change out the mixer valve in each one every year because of our hard water. The Moen works at least as good as the generic brands but they are a way better price here than at a home improvement store.Lire l'avis complet

Moen 1222

I have installed this year for years. DO NOT buy generic equal or off brand. Don’t be fooled by the price they are garbage. Only buy the genuine made buy Moen in the original package that has not been opened.Lire l'avis complet

Achat vérifié :  Oui • État : neuf • Vendu par : isoldyou

Moen 1222/1222B OEM cartridge worth the price

High-quality OEM replacement part from a top manufacturer. Follow directions for the install and the result is a like-new shower/tub handle that works effortlessly. Please note that removing the existing 1222 cartridge can be challenging because the large black rubber seals on either side of the cartridge tend to harden over time, making it difficult to extract the cartridge. Even pulling on the stem with vise-grips or adjustable pliers may not budge the old cartridge. I had to purchase a cartridge puller and even then removal was slow and difficult - I could not have gotten the old cartridge out safely without the puller. Fortunately, the puller is available in the aftermarket (e.g., Danco 86712 Puller for Moen, at Home Depot for about $13). Again, the new 1222 cartridge itself is excellent. All of the shower/tub handles now work with fingertip pressure rather than needing hard twisting to go on and off.Lire l'avis complet

Achat vérifié :  Oui • État : occasion • Vendu par : pvddeals

Good product

Good product, but next time I’ll try to remember to buy the rebuild kit.
However, it is much easier to buy the preassembled part if you don’t want to deal with the hassle. I looked at the aftermarket preassembled part at a couple of hardware stores and it seems like you have to fool with it to get it right. So I got the original Moen instead just about $20.00. Look for the original and “price from low to high” to get the best deal. The difference between 1222A & B are that one is sold in big volumes and the other is sold individually.Lire l'avis complet

Achat vérifié :  Oui • État : neuf • Vendu par : cha_supply

Awesome!

My new 1222 Moen shower control cartridge is working great. The control knob works so smooth and the water mix is extremely accurate. Twenty-Four years have passed since our home was built. I would say the original Moen cartridge served us well. NOTE: I applied a heat gun to the valve body for a short time to aid in the removal of the old cartridge. - Jim Lire l'avis complet

Achat vérifié :  Oui • État : neuf • Vendu par : isoldyou

Good product, in good shape.

Better to go with OEM part less chance of a leak a few months down the road. Some of these cartridges have gone 17 plus years without a leak. Someone had a bad one the original when there house was built used my spare these are my new spares for my own faucetsLire l'avis complet

Achat vérifié :  Oui • État : neuf • Vendu par : journey1967

Excellent value!

Very good value for OEM product, matched my shower faucet perfectly with none of the water knocking that has been known to happen with the cheaper off brand replacements

Achat vérifié :  Oui • État : neuf • Vendu par : isoldyou

Nice item ,great price, will leave follow up feedback once installed. Time will tell as to its quality? Thanks

Nice item ,great price, will leave follow up feedback once installed. Time will tell as to its quality? Thanks

Achat vérifié :  Oui • État : occasion • Vendu par : avaabe

GENUINE MOEN PARTS, FOR LESS TROUBLE

Well what can I say but It is a genuine Moen part and it corrected my problem. My old one did not leak but there was very little pressure which was not Moen's fault. There was a drop of loose solder from installation that blocked the water. It works fine now. Always purchase Genuine Moen parts for you faucet as from what I read on comments that the aftermarket ones were trouble.Lire l'avis complet

Achat vérifié :  Oui • État : neuf • Vendu par : coolsolution01

Epic failure of a cartridge design

This Moen cartridge needs annual replacing. The entire cartridge. Simply changing the gaskets and lubing won't work. This is my third valve. The original one actually broke at the stem from being so hard to turn, metal fatigue failed. The whole thing gets hard to turn in about 6 months.

Before you think, "hard water," I have another house in the same water district using American Standard and it works as well as day one... 10 years later. My parents valves work as well as day one after 30 years. With zero maintenance.

This cartridge is epic failure. I just don't want to shell out the bucks and deal with the hassle and disruption of opening up the tile wall, replacing the entire valve, patch the tiles back with visible repairs that I have to stare at for the rest of my life.

If you are standing at Home Depot looking at valves, skip this one. Go American Standard.Lire l'avis complet

Achat vérifié :  Oui • État : neuf • Vendu par : raggedyande