- Tout
- Neuf
- Occasion
5étoiles
19évaluations4étoiles
5évaluations3étoiles
1évaluation2étoiles
2évaluations1étoile
3évaluations
Easy to set up100% J'accepte
Good value0% J'accepte
Good print quality0% J'accepte
16 avis
Very good machine though a little restricted
The makerbot Mini is dedicated to large audience; they ensured printing success then restricted some stuff: you can't tune all the parameters that you would like. Can't remove raft step: yes you are sure your object won't warp or detach from the bedplate during print, but then the contact surface won't be smooth. You can't go under 200um precision though it would be possible with this harware (same physical extruder than the other pro devices), this is a software limitation. And with the regular extruder, a lot of jam occur, have to load again the filament then resume the printing... but I'm quite happy for now. Just have to figure out how I can achieve to print with flexible filament, some brand work quite fine and other don't at all, perhaps it will be better with the upgraded extruder SmartExtruder Plus.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : H9_q2xupRWy@Del...
At first skeptical...
I have to admit that this was first and foremost an impulse buy because I couldn't resist the low $300 price point with all the extras. I was very skeptical at first because in the week that I waited for this printer all I read were bad reviews on 3D printing in general. First, it took about 2-hours to set this up because I didn't know that is was not compatible with OSX Yosemite even though I downloaded the latest software. Second, when I tried with Windows 7, it took about 3 re-installs to get Windows to recognize the proper USB device drivers for this thing. It was very frustrating and believe me, buyers remorse was setting in quickly. Once I finally figured it out and started printing the print quality was not bad. The setup was straight-forward when following the setup guide. It is what it is and says what it does.... it's a 3D printer. I printed the "Space Dog" for my first print and it wasn't bad. Second I printed a toothpaste tube extruder and the print quality was so good that I printed a second one. So far, for the price, two thumbs!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : quickshipelectr...
Good, but...
The MAKERBOTS are good machines. However, the printing heads that come with them are crap. You have to order the newer head at the same time you buy one of these, otherwise you'll have a nice desktop MAKERBOT. The printer head that comes with them clog almost immediately and are next to impossible to get working after they clog. The newer printer heads work fine and are easy to clean if they clog... which is much less.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : boswarehouse
Great Value for begineers 3D Printer
The seller Scott is great, delivers good quality products and is very honest. He contacted me after I received the printer to let me know that there was a cheaper option for shipping and he was going to issue a refund. The printer was brand new and works great.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : snsdistro
3d printing
After reading other reviews I finally decided to go with makerbot. I had seen several of these printers in use at a local museum, where they had been reproducing one the Chinese imperial palaces. The detail was amazing. You could still see the print layers but after they had finished and painted each piece everything looked perfect. The makerbot mini has a few quirks and takes a few minutes to set up, but you once you get it going you'll be printing every chance you get. I've found that while print times can vary from an hour to ten hours it does give you the ability to print multiple parts at one time. I was most impressed with a ball joint doll print that had internal parts that allowed movement of the hand and wrist without any assembly. Very impressive, I hope at some point they will make upgrades for the mini to allow use of other materials than just PLA and I think the purchase of a 3d printing pen would allow more options for adding multiple colors and details to your single color print.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : H9_q2xupRWy@Del...
Makerbot Replicator Mini
This is the 2nd 3D printer in my house. The other being a Printrbot product. The printing from the Makerbot is incredible with very easy set up. The accuracy is very close. The included filament spools are going to last a long time, which is great because there's gotta be a million plus things to download and print.
Other than 2 minor things we couldn't be happier. The only issues we have is it's kinda loud and we had a filament jam that required pulling the extractor apart to clear. Luckily a youtube video made clearing the jam very simple. I put some automotive sound dampening sheet product on a few places that helped quite a bit with the noise. Being enclosed with large flat panels makes it difficult to get quiet but the dampening sheet helped.
This is a great 3D printer and we can't wait for the larger ones to be more affordable for the casual user.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : quickshipelectr...
Works great
Makerbot had some very bad startup issues with their new Gen5 printers, but the newest software and firmware has fixed it all. If you just want a printer to work and only need PLA, this printer is fantastic. It is really reliable and I never have to worry about my job finishing. You can buy blue painters tape 2" wide and just wrap it around the bed. There is no RFID chip either and so you can rig up a spool and feed this printer any old PLA filament. But theirs is a decent deal as well. The smart extruder has bad press from the early days, but the new software and firmware fixes this well. You can also easily take the extruder apart and fix it yourself once it is out of warranty. Lets face it, any low end 3D printer needs some TLC, but this one may need the least. If you look at the design of the z-axis drive and the 2 motor x-y axis and the smart extruder, you can see that this was designed by professionals. I recommend this printer highly if you don't mind the small build size and you stick with PLA. filament.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : flo613
Bad Purchase
Product advertised as used but fully functional, but missing extruder and build plate. Bought those parts and printer still would not work. Sold for parts.
Achat vérifié : Oui | État : occasion | Vendu par : aerodealz
So far so good!
There is quite a bit of hate for makerbot on the internet. I decided to take a chance due to the great deal I got on eBay. It was definitely worth it and I love 3D printing with my makerbot mini. I've printed some mods to resolve some of the printers flaws and the last few 5+ hour prints have been flawless!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : quickshipelectr...
Could not have been better!
Product was exactly as is and a very good deal for a used product!
Achat vérifié : Oui | État : occasion | Vendu par : kruzer