Avis sur le produitJ-B Weld 8297 Adhesive Glue - 2oz

Just isn't worth it for a permantent repair!

I tried to repair my exhaust shield with the putty after the welds rotted away from years of rust (No holes) and the putty just cracked and crumbled into pieces after two drives and I did let it let dry for 3 days! it's solid, but not solid enough. I then bought the Steel reinforced epoxy and that did a way better job than this putty and it didn't crumble or crack and it is rock hard and the exhaust shield feels like it's welded in place! The steel reinforced epoxy has the same heat rating as the putty, so why does JB weld recommended the putty over the epoxy for exhaust repairs when the epoxy is the better choice? Not to mention the putty and the epoxy are around the same price, so I would only use the putty for emergency repairs, but not a permanent fix.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : thehardwarecity

Easier than welding. Takes the heat!

I used this to stick a broken weld joint on a heat shield on my exhaust. I used this right up near the exhaust headers where it gets really hot, and its been holding up wonderfully. No more brain-shaking rattling! Easier than actual welding!Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : sirr0und

Not for exhaust applications

I applied this to a spot the end of my muffler and the product just melted and smoked. The packaging also make it so that you cannot pull the stick out in one piece after the first use. This would probably be a good product for other applications, but not for any sort of exhaust.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : promax_supply

awsum

we seldom need a really good high temperature bonding/sealing compound, but when we need it we really need it!

Achat vérifié :  Oui | État : neuf | Vendu par : ralliart401

J B makes some pretty good sh*t

Had to repair a rusty leaking engine oil pan. HOT engine oil, holding up since last summer

High Heat JB Weld

does what it's supposed to do - easy to mix thoroughly - could have a little more work time, but not a big deal for small areas, only if on big projects

Achat vérifié :  Oui | État : neuf | Vendu par : greatbrands

JB HighHeat

Very strong hold for metal. I used it applied on firepit, it great high temp heat.

Achat vérifié :  Oui | État : neuf | Vendu par : promax_supply

Works for a day, then falls off

This held the exhaust leak for a day, and then came off again. Yes; I properly cleaned and roughed the surface I was using it on; however after MULTIPLE different attempts; result was the same

Achat vérifié :  Oui | État : neuf | Vendu par : thehardwarecity

J-B WELD , 2.0 oz High Heat Putty

This Putty is Fantastic ; I would recommend to anyone(You must follow directions) ; It's very EASY TO USE & WORKS AS DESCRIBED ; CAN'T beat it for Price & Quality .

Achat vérifié :  Oui | État : neuf | Vendu par : bicwarehouse

Works really well!

I used the pot to glue some sockets for a lamp. It works really well and stays strong. The last couple of "high heat" glues I tried before failed.

Achat vérifié :  Oui | État : neuf | Vendu par : sonorandesertau...