- Tout
- Neuf
- Occasion
5étoiles
86évaluations4étoiles
6évaluations3étoiles
0évaluation2étoiles
1évaluation1étoile
0évaluation
Good value100% J'accepte
Would recommend100% J'accepte
Good quality100% J'accepte
69 avis
Worked in my Generac 15KW generator
Worked flawlessly. My issue: The power kept fluctuating from 50V to 350 Volts with the original AVR and the RED LED on the AVR kept going on and off (it was bad). Once I replaced it with this upgraded unit, it worked perfectly. I just needed to adjust the Hertz and Volts. Just make sure you adjust the HERTZ frequency and Voltage according to the manual. My unit (15k genset, model 0439) was suppose to be 62 Hertz and anywhere from 245-250 volts. To adjust the hertz, connect a volt meter to the main breaker on the generator (make sure the breaker is OFF). Turn on the generator. Using a voltmeter, check the HERTZ and make sure its at 62. Then, adjust the Volts by turning the adjustment screw on the AVR until the volts are within that range of 245-250 (I set mine at 247). Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : generatormagic
It Worked
The Regulator fit just like the old one, wire for wire changed out so it went smoothly. The voltage adjustment went just as easy. I haven't ran it any length of time, but I am sure it will last the life of my generator.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : iowagenerators
Exact fit for generator.
The voltage on the generator went to 150 volts on each leg during a recent outage of the utility supply. I was lucky to be home and shut the generator down only burning up one furnace transformer. After testing the generator I determined the voltage regulator to be the only bad part.
This one came with a better 10 turn pot for adjustments, fit exactly like the original VR and had the cooling fins.. Made the adjustment for the proper voltage output and ran thru a complete transfer of power. Everything worked fine.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : industrial-equi...
Took care of problem I had where voltage would not stay where I set it. was Old style VR with plastic screw
This is the place to buy you generator parts. I called them before ordering to run by tech issue. I figured it was voltage regulator but just wanted to make sure nothing else could throw it off. Everyone i made contact with was very nice . I bought the part installed it stays at 124 now and life is good againLire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : iowagenerators
Problems Solved
Should have purchased this last year. After a year of frustration and my 15 year old 15KW Generac Guardian home generator not running right or putting out the right voltages, I discovered it had a poor internal adjusting potentiometer, I made this purchase, put it in and problem solved. This newer model voltage regulator is superior over the old model. Works GREAT now. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : industrial-equi...
Good purchase.
I went with this model regulator because it was $100 dollars cheaper. Talking with a repair facility, electronically it was the same just that this one had fin on the back. So slight modification to the internal housing of the generator were made so the fins on the back were exposed to air being drawn through the generator cabinet.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : iowagenerators
Generac 15KW voltage regulator module
This fully potted voltage regulator is a effective replacement for the original on my 10 yr old 15kw Generac. It has much improved voltage control due to an improved adjustable pot to set the voltage.
Easy install. Rugged construction to take continuous vibration.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : generatormagic
Same as OEM equipment!
Works like a champ, Same as OEM , great product, "THANKS"!!
Would recommend to anyone needing this product.
Achat vérifié : Oui | État : neuf | Vendu par : sdspark58
Quality all around
I needed some assistance to confirm the issue with my generator and that this part was a cross to the original. Not only where they very knowledgeable and helpful but they also kept their commitment of returning a call (after business hours). 5 stars and 2 thumbs up!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : iowagenerators
better than original
This regulator fit perfectly and was easy to install, all at a good price. It is better than the original because it has a brass screw for the adjustment instead of plastic like the original.
Achat vérifié : Oui | État : neuf | Vendu par : iowagenerators