- Tout
- Neuf
- Occasion
5étoiles
63évaluations4étoiles
6évaluations3étoiles
2évaluations2étoiles
1évaluation1étoile
4évaluations
Would recommend85% J'accepte
Good value86% J'accepte
Good quality95% J'accepte
56 avis
Installation Tips, clean, clean, clean
It fixes the problem. A few notes; 1, the old o'rings are now hard rubber. They will come out in pieces and leave a trail of bits. Clean this out. Otherwise you risk clogging your injectors. 2 I recommend getting a set of brass o'ring tools as you want to be careful as to not scratch the fittings. 3 installation, I used an old piece of the hose from my air ride suspension. It was about 2 inches long. On this I mounted the check valve. Added the spring and inserted the assembly. Followed by the new o'ring. The o'ring went in sort of sideways. I was able to use my brass o'ring tools to push it up into place. It just snapped into the groove. 4 the lower o'ring, same as the check valve o'ring. It goes in a bit sideways and then just pops into place. 5 I used WD-40 to lube things up and help wash the old bits of o'ring out.
Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : chickenstripscy...
Fuel Tool check valve repair tool.
Eventhoug this product is of high quality and clever design, the problem with it is the availability.
I have been waiting for my tool for two months without hope. I cancelled my order to Motocross Giant in California, placed a new order to J&P Cycles with the same result (on back order all the time).
Fuel Tool guys: please expedite your production.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : henleyskustompa...
Did the job
In my case the upper o-ring was swollen up, which wouldn't allow the fuel line to seat properly and let the quick release to lock in place.
I took the tank off and turned it upside down to do the replacement. The kit work great. Saved me from replacing the whole quick release component.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : chickenstripscy...
quick easy way to fix your drip
simple to install, much less expensive than taking to the dealer.
Achat vérifié : Oui | État : neuf | Vendu par : jra_jentschracing
Wrong size o-ring in kit!
Lower o-ring is the wrong size. Seems everyone has this problem. Since I was having a rough time getting it in place I checked youtube videos and found all of the videos explained the lower o-ring was also the wrong size for them too!
Get your act together Fuel Tool. Should be named Fuel FOOL! You are wasting everyone's time. Wish I could rate you zero stars. Ridiculous....Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : parts_giant
good parts
easy to use and saves you money
Achat vérifié : Oui | État : neuf | Vendu par : chickenstripscy...
Wrong parts for my Harley Davison 2001
I have a Harley Davison 2001 with two gas lines said it would fit my hd the o rings were to large did not work.wrong parts.
Achat vérifié : Oui | État : neuf | Vendu par : chickenstripscy...
Nice and easy way to rebuild your fuel lines.
It is a simple replacement for your fuel line, However you need to have the fuel tool set to do the job.
Achat vérifié : Oui | État : neuf | Vendu par : qeautoparts1
can't review, it was returned, i ended up replacing entire valve
can't review, part wasn's used
Achat vérifié : Oui | État : neuf | Vendu par : parts_giant
Just buy a new check valve for $60.
This item didn’t work and it cost me $100 to find out I needed to go get me a $60 dollar part to put new check valve in bike that only took about 30 min.
Achat vérifié : Oui | État : neuf | Vendu par : shopdenniskirk