4.44.4 étoiles sur 5
63 évaluations du produit
  • 5étoiles

    47évaluations
  • 4étoiles

    7évaluations
  • 3étoiles

    3évaluations
  • 2étoiles

    1évaluation
  • 1étoile

    5évaluations

Would recommend86% J'accepte

Good value86% J'accepte

Good quality82% J'accepte

54 avis

par

Better than expected

Pro:
1. Touch on/off still depends on humidity, how dry your finger, etc. but it is solid and toggles cleanly. You may need to maintain the touch as long as 1/3 to 1/2 second in certain cases.
2. Tested: can work on ANY non-dimmable/dimmable light bulbs: LED, fluorescent, filament.
3. Can handle light bulbs up to 72W/120Vac or 132W/220Vac. That is, best suited for LED and florescent bulbs. For incandescent, filament, bulb, limit it below 72W/120Vac.
4. Can handle 8A surge, 0.6A-RMS, 400V rating on the MAC97A6 triac (as a solid-state switch).
5. Already on-board option to replace MAC97A6 with BT136 triac (600V 4A continuous, 25A surge).
6. The safety design on the touch sensing node: It is isolated by 2 in series 1000V ceramic small value capacitors (0.01uF each). Or, the total sense current is 63uA only, very safe. Two caps in series as double safety to assure isolation.
Con:
1. Wiring instruction: poor, but diagram on plastic box is clear. Only experienced DIY will know which wire is hot side.
2. Board design does not have better clearance between high and low Voltage copper traces.
3. The high Voltage hot side of AC input copper trace is on the edge of the board. So the only safety protection is the plastic box itself.
Remedy: Tape/wrap the box with electrical tape, or glue, so that box won't be accidentally open.

Wiring instruction for USA 120Vac:
Brown wire = Neutral, to USA White wire from AC outlet. Also tied together to light bulb outer ring contact (White wire of the bulb socket)
Red wire = HOT, to USA Black wire from AC outlet
White wire = to the load, such as to the center/tip contact of the light bulb (Black wire of the bulb socket). This would be electrically connected to the Red wire, when the switch is on.
Yellow wire = touch sensor, to the lamp metal body or any metal for touch sensing.

If no way to screw the yellow wire or its metal ring to metal body, you may use Aluminum adhesive tape to securely tape the yellow wire to the metal body. Make sure also tape a good portion of the yellow wire, not just the bare wire or the metal ring. This assures no movement of the yellow wire that may, over time, let loose the contact. Aluminum tape is air-duct tape sold in house building supply home depot.

Other: For the price, it's great value/price ratio.
Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : yfh6696931-2

par

Lovely small star stickers

The stars are small and nice, exactly what I wanted. Also, cheap. They are made of thin paper, so I would say that they’re not suitable for resticking and for little kids’ fingers, just because the stars can be easily damaged. But they look lovely as decorations on cards and in scrapbooks, or as rewards for children in their notebooks.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : infinite.force22

par

Great product, does a good job.

Great product. I bought these mop heads to replace the original one. I purchased 6 to have on hand when I am cleaning multiple rooms

Achat vérifié :  Oui | État : neuf | Vendu par : bestsevice2011

par

RCA viking tablet screen

OEM quality. Worked perfect. Have been using for 3 weeks now and no issues so far.

Achat vérifié :  Oui | État : neuf | Vendu par : tyllq

par

Fits

Fits as described and was easy to install. Would have been nice to have a phillip screw driver with the other tools.

Achat vérifié :  Oui | État : neuf | Vendu par : tyllq

par

Lousy stickum

The adhesive is terrible - won't stick to anything. I guess it would be ok if paper is the only thing you are using them on, but compared to ones I have used in the past, they suck. By sheer numbers they are a good value, but not very useful.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : onsalezone2012

par

Micro-edge a good value shave system!

As advertised the Micro edge trimmer/system a good value in the mens grooming department! Charges quickly and offers good usage for immediate and extended usage!

Achat vérifié :  Oui | État : neuf | Vendu par : heymotor

par

Exellent

Great quality good packaging came with camera mount and all tape already installed A+++++

Achat vérifié :  Oui | État : neuf | Vendu par : huluseal

par

Its fine...i liked!

It was not what I expected .... but it's okay ... on television it looks perfect shaved ... but in reality I would like to shave deeper ... but it's fine.

Achat vérifié :  Oui | État : neuf | Vendu par : heymotor

par

Easy to install and works great

Achat vérifié :  Oui | État : neuf | Vendu par : tyllq

Pourquoi cet avis est-il inapproprié?