- Tout
- Neuf
- Occasion
5étoiles
667évaluations4étoiles
116évaluations3étoiles
45évaluations2étoiles
32évaluations1étoile
82évaluations
706 avis
Worked well enough to get Watch Band pins out
Worked well enough to get pins out and put pins back in the Watch Band.
However, I bent and broke off 2 of the Tool Pins because they were too long and thin (and the Steel too soft), and because the pin in the Band was too tight to get started pushing it in.
I had to cut off and shorten the small end of the Tool Pin to just long enough to get the stubborn Band Pin started pushing it in (without bending), then I changed to a long Tool Pin to push the Band Pin out the rest of the way.
This metal Tool works much better than the another model that is made of plastic.
I would have easily given this Tool 5-Stars if they had included more Tool Pins including a couple of shorter Tool Pins, the Tool Pins could also be made from a harder/stronger Steel that doesn't bend and break so easily.
Still trying to find more Tool Pins to replace the ones I bent and broke.Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Watch link remover.
This little device works well for what it is but be prepared to do alot of hand alignment with thinner bracelets for the pin will not line up with the little ram unless you put some folded up paper to raise the link. Worked great with no problem for a Rolex President type watch band. For the price you cant go wrong even for adjusting 1 band is less than a jeweler.Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Link Pin remover review
This tool is very cheap, but it does the job with two tiny modifications. First, I greased the threads slightly to make the screw turn easily and more precisely. More important, I trimmed about half off one of those push rods they give you to push the pins out with. The steel is very thin and flimsy, and it will often bend rather than push out the pin on your watch. By cutting it down to half length, it became much less likely to bend, and it pushed out the pins with ease. If you really need the full length to get the whole pin out, just switch the short rod for a full length one after you get the pin started out. I found that once it started, the rest was easy. Very good with those slight modifications.Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Great Value & Function
Simple, affordable and effective. It must be correctly aligned or the the tip will bend and probably break. It also must be used on the correct side of the link pins or they will not come out fully. Properly done it is very easy, quick and effective. A great value for anyone with a smaller wrist and multiple watches. Additional tools are a bonus. Pays for itself with one use. A pleasant surprise!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : jacobsparts
Watch Pin Tool
Works as intended. Took a little getting use to the use of it. But when I got the actuaal use of it - Worked like a charm - Most likely not a professional watch maker tool - But for the home hobbyist or the occasional home use - I totally recommend the product.Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Great Watch Band Tool
This watch band tool is really easy to use to remove the pins and links. I am very pleased with this product. I definitely recommend it for anyone that does their own stainless steel watch band adjustment.Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Good metal tool for adjusting watch bands - easy to use
Prompt delivery, the tool works as shown. The adjustment to level the band with the push-pin might need a shim, but this is easily done. Strongly recommend.
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Metal Adjustable Band Strap Bracelet Link Pin Remover Tool Kit Set
Received and was able to remove extra links on my wife's new Michael Kors watch which were white ceramic links. The pins were pushed out about a half inch and used a pair of pliers to pull and release the links. Took me about 10 mins to remove three (3) three links. The kit came with extra pins in the event any of the pins broke. I would recommend this device to keep handy and save money getting it done at a jewelry/watch repair store. Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery
Great Little Tool
This tool makes changing my watch band so much easier. I used to use a pocket knife, which really didn’t work well. But this really does the trick.
Achat vérifié : Oui | État : neuf | Vendu par : YUWNMYEsTU2@Del...
Money Saver
Would have liked the base to be able to adjust higher before coming apart for thinner style links. Had to hold link vertically which was a little awkward. Bottom line worked great and no more taking watches to jeweler. First use saved me money plus it paid for itself.Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : batterygallery