- Tout
- Neuf
- Occasion
5étoiles
32évaluations4étoiles
1évaluation3étoiles
0évaluation2étoiles
0évaluation1étoile
0évaluation
Would recommend96% J'accepte
Good value92% J'accepte
Good quality96% J'accepte
19 avis
Works, but setup is tricky!
This device will allow you to connect two analog telephones to VOIP service. The setup is relatively simple, HOWEVER note that in order to gain access to the web interface of this box you MUST connect a computer to the LAN port (yellow) and NOT the WAN Port (Blue) and you MUST connect to the device using the special IP address of 192.168.15.1 and that only works if your computer is on that same network i.e., 192.168.1.xx. Then, after you change the default password (admin/admin), you can access the web interface from the WAN port which by default will obtain its address via DHCP. This whole procedure is cumbersome and rather unnecessary. Most device of this type allows initial access and setup via the WAN port (often its only port). It is fine to require password change on initial login before setup, it is crazy to require this be done via the LAN port using a special address.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : shop4tele
Exactly as described. Came with power adapters. Works. Routes calls and great for my testing setup where I can use it as a faux phone network to act a
Exactly as described. Came with power adapters. Works. Routes calls and great for my testing setup where I can use it as a faux phone network to act as a "go-between" for my dial-up Internet emulation setup. Thanks! A+Lire l'avis complet...
Achat vérifié : Oui | État : occasion | Vendu par : azwedge
Low Cost high quality ATA Adapter
Small form factor, accepts internet and ethernet plus phone connections with easy set up.
Achat vérifié : Oui | État : occasion | Vendu par : beardedpicker
Good ATA but..
The ATA may be hard set to provision for a provider when booted. You can tell by resetting the ATA and then log in and go to provisioning under voice. If anything exists clear that out and then save. It is best to update the firmware first. Just keep in mind if you ever reset the ATA to clear out provisioning again so it's not auto-configured on boot up. I've been using one of these Cisco SPA122-RC sip ATA devices for two weeks now and has been really good.
Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : thegoat86
Super simple voice gateway
Not the newest item on the market at this point, but this is the easiest, simplest, and cheapest voice gateway I've found. Works with rotary phones too!
Achat vérifié : Oui | État : occasion | Vendu par : spider!63
As expected
This is a product we use regularly at work, they were in great shape
Achat vérifié : Oui | État : neuf | Vendu par : *athq*
Cisco SPA122
Working as intended. Setup was easy and many tweaking possibilities were given.
Achat vérifié : Oui | État : neuf | Vendu par : a.renart
Cisco SPA122 Router and VoIP Analog Ttelephone Aattachment
This is built to last and works as intended. I have bought 4 of these. One was noisy and had to be returned. The others are in-use.
Achat vérifié : Oui | État : occasion | Vendu par : imperialbikeco
Good product to convert analog phone to SIP
Work as expected
Achat vérifié : Oui | État : occasion | Vendu par : evana2009
Great technology
Product works exactly as described and the audio is crystal clear!
Achat vérifié : Oui | État : neuf | Vendu par : wcoil