- Tout
- Neuf
- Occasion
5étoiles
34évaluations4étoiles
6évaluations3étoiles
0évaluation2étoiles
1évaluation1étoile
1évaluation
Would recommend92% J'accepte
Good value96% J'accepte
Good quality95% J'accepte
29 avis
Great product!
A must install for high bars. These work great, really tighten up the feel on the bars. Little to no movement but still absorb the vibrations. Allen Ness makes a great product. Show chrome washers. Very tight tolerances make install a little more difficult than stock, not that much though, and worth it in the long run. Highly recomended.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : americanclassic...
Bushings
These were just the ticket. The bushings on my wife's bike were shot. So bought these to tighten up the risers. The old ones were well worn out as they came out without a hitch. Putting these in was not as easy. Had to "make" my own press to get them to pop in. But they went together and now the bars are in way better shape.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : easternpc
Cheap poly bushing, great result.
I have 10" T-bars on my Dyna. The stock bushing had a bunch of slop. These tightened everything up nicely. $25 WELL SPENT!
Achat vérifié : Oui | État : neuf | Vendu par : bikerbillys
Great product!
Finally, a high quality poly riser bushing set that holds like a solid bushing. These things are rock solid but still control the vibration. I had another brand of poly in before, but still had some flex in the bars I couldn't stand. I switched to solid bushings, but for long rides the vibration was annoying. I tried these and what a difference. Bars are solid with practically no flex, but the vibration is WAY down compared to solid. Killer product and well worth the $26.
INSTALL NOTE: These things are spec'd tight as he%%. Was tough to get the top bushing in at first, and had to install the inner housing from the top down with a hammer. That said, once the top is in, the bottom goes in and it tightens up just fine. Well worth the work to do.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : shopthefox
BEST RISERS.
MUST HAVE. I saw another review where it was stated that a press would be needed to install these.
I used some washers + my riser bolts to put these things in and my goodness! The previous no-name bushings I put in lasted about 2000 miles and they were NEVER this secure. Total game changer being able to turn my bars and go in that direction.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : americanclassic...
Will buy again for my other sportster
Gate quality part handles like a dream
Achat vérifié : Oui | État : neuf | Vendu par : m40powersports
Ness bushings
No play in the bars at all with these installed, but getting them in there was a job! I had to bevel the ends on my Lathe and use a very large vise to get them seated.
Achat vérifié : Oui | État : neuf | Vendu par : qeautoparts1
Stiff
Theses little boogers are stiff, and take some forsee to get them installed.
But that's what their supposed to be.
I grabbed my trusty rubber mallet n tapped them in.
Achat vérifié : Oui | État : neuf | Vendu par : fuqua2amo
Excellent product
Used them on my 2013 fatboy lo. no more play in the bars good product
Achat vérifié : Oui | État : neuf | Vendu par : easternpc
works great
These replaced the tired stock rubber bushings. Now my handlebars don’t rock back and forth anymore.
Achat vérifié : Oui | État : neuf | Vendu par : easternpc