5étoiles
20évaluations4étoiles
2évaluations3étoiles
1évaluation2étoiles
0évaluation1étoile
5évaluations
Powerful78% J'accepte
Well built75% J'accepte
Easy to store88% J'accepte
28 avis
Typical Chinese Quality--Buy 2 to make 1
Received it and got it running late. Had to go get compressor oil and fill it up. Ran it one cycle and called it a night. Next morning found air compressor pump had leaked out all it's oil. Oil running down side of tank and on my nice sealed concrete floor. Not happy at all. Air compressor has a cheap tin plate on the entire bottom of it held in with looks to be silicone and screws. At least they could have painted the cheap tin to prevent it from rusting. I seriously doubt this air compressor could last a year. It is not a commercial or industrial grade air compressor head. The oil drain plug if that is what you can call it, is cheaply tapped into the cheap tin plate. So when the compressor is mounted, you have to remove the mounting bolts just to change compressor oil. This compressor is more like for the part time user. I highly do not recommend you waste your money on it. Buy a cast iron one instead. Typical Chinese quality. Better buy 2 of these so you can make one good one. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
Good purchase
Appears to be a decent pump, especially for the money.nicely packed in a heavy duty carton.only issue I had with it was I had to new drill holes to mount it…. although my compressor tank mounting plate (on the tank) has holes for several different type compressors,, none of them would work with this compressor.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
Would not buy again.
Rusty base plate plate, filled unit with oil hooked up to motor and tested it, unit ran less than 30 seconds before it seized up. Took apart and found a rod seized on the crankshaft. Looks like it was too tight and the oil hole was not countersunk leaving bearing material on crank just where the oil hole is the other rod was nice and free moving. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
Well packaged for shipping, not a bad compressor for the price, flywheel pulley a bit weak but overall a good deal. I have found a good choice for the
Well packaged for shipping, not a bad compressor for the price, flywheel pulley a bit weak but overall a good deal. I have found a good choice for the compressor inlet 1/2 inch propane flex pipe . Hopefully the compressor will last... for home use regularly. ThanksLire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : wulitaotaoh_9
Works Great!
Installed this on a 26 gallon tank, from 0 to 120psi takes 1 minute 50 seconds. It keeps up with my die grinder also!
Achat vérifié : Oui | État : neuf | Vendu par : wulitaotaoh_9
Works great
Fast shipping, well made product. Runs and builds pressure good.
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
Good pump for affordable price
I haven’t used it much bud it works good for now.
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
good pump
works will and has real bearings not bushings on shaft
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
Works great installed on my old compressor,builds air faster and quieter
Best compressor for the Money build air faster and quieter than the old one.
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1
Useless the way it leaks
It pumps air fine but you can’t keep oil in it leaks out the breather tube makes a terrible mess on everything around it
Achat vérifié : Oui | État : neuf | Vendu par : audiyeah-1