5étoiles
272évaluations4étoiles
26évaluations3étoiles
15évaluations2étoiles
3évaluations1étoile
8évaluations
Would recommend94% J'accepte
Good value100% J'accepte
Good quality94% J'accepte
268 avis
For the price, so far, it doesn't seem too bad. But there are some issues.
As of now, the headlights seems pretty nice for the price. However they are not perfect. The projector lense, which I'm guessing is acrylic or something, has some bubbles in the pour of the casting.... also, the high beam cone doesn't meet the angel eye, so you can see the wires leading to the angel eye which looks a bit sloppy.... aside from this, I was annoyed to find out the headlight bulb was not the same as the OEM size, so my H13 LED's won't work in these and I had to buy a new set of 9006 LED's, which also means I would have had to buy high beam led's too if I wanted them, but I just don't care... I was kind of disappointed in that, however in the end for the price, I'm not going to go storm the gates. They are acceptable to me. (Ps I did seal all the seams with extra silicon, so if they do fog or start yellowing, I will return and let you know)Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
Alignment issues
The lower fender side adjustment screw is shorter than the OEM fixture and can make it very challenging to get the proper height adjustment, which can result in not being able to get alignment less than ideal.
The light housing appears to be good but has no exhaust vent that would keep it from fogging or collecting moisture, guess time will tell.
The bottom line is they will do if you are trying to save a buck but if you are picky then this is not the light for you. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
2005 Rx8 tail lights
The tail lights fit on my 2005 Rx8, they fit good but not as tightly as the original stock lights. (But you can’t notice it) They look great and are bright. It was a simple plug and play. The brake lights are led and used the same reverse and signal bulbs. I installed the bulbs onto the new tail lights before installing on to the car. The wires were long enough the connect and had no issue with installing. Fast shipment and I’m very happy with the product. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
Spyder Projector Headlights (non CCFL)
Just a few things to mention:
Halos - these are not CCFL. This means that during the daytime, you will not be able to see the halos. At night, they provide zero to no light. They are strictly for aesthetics. I knew this, and still like them. They gave my truck a whole new look.
Projector (low beam) - keep in mind that the low beam light is a halogen. The projectors are great! Provide adequate light and the distance is quite impressive. However, I chose to replace the low beam with a simple LED and the difference is SPECTACULAR. I feel like I can see for miles with the LED replacement. Keep in mind, if you replace the halogen for low beam (9006) you also void the warranty, complete at your own risk.
FYI - the directions for wiring are non existent. It took me an hour or two of youtubing to figure out which wires to splice together. If you're not comfortable with wiring, go to an auto shop and have them put them in.
Overall, I am completely satisfied. For the price and a few minor tweaks, these set of units are perfect for my old ford truck.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
Nice replacement part !
Very satisfied with the headlight assembly ! I just wish it would of included the small clips for the trim piece ! After removing from my old assembly they would no longer clip into the new assembly.
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
Near OEM quality for a fair price.
Quality is very good, maybe even better than OEM. Price is fair considering they're a full package deal, plug and play. It was a little tricky to get the turn signal bulbs to seat correctly in the housing. Used some pliers for extra leverage because its a tight fit. Use a hose pick or other skinny tool to move the gasket out of the way or else it'll get crushed by the bulb holder. All is good now and no water leaking to the inside of the housings.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
Looks good but sometimes a bad batch comes around.
For under around $200 you can have these taillights on your RX-8. They look good and the pictures so don't do it justice. Coming from broken and dusty rear taillights I can say I'm ok with my purchase. Reason I say that is because I have already found a defect with the Passenger taillight. It has condensation already on the inside. About 2 hours prior to me writing this review I had them installed. It was raining and after about an hour of driving I noticed the flaw. Otherwise good product. Looks good but be weary of your order. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
New headlights.
You have to cut out the fiberglass housing to make these fit. That's no problem except these lights are the only thing that will work after that. Bulbs /wiring was backwards. Hi beam indicator on when in low beams. Reversed wiring and all good. When I upgraded to led bulb, found that the wiring was correct and the actual bulb was wired wrong. Overall pretty large job to look upgraded. I would do it again but would do some more research on brands, and sellers. Looks great but poor aiming of beams. With either regular bulb or led bulb. I give it an average score. Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
Shiny & New! Lots of chrome!
These lights look amazing on my Avalanche! The truck looks like a "New Concept Vehicle".
I'm getting compliments wherever I go....especially since I also updated all the cloudy old front
lamps as well! COOL!!
Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto
2002-2009 Chevrolet Trailblazer Rear Taillights Left And Right
A couple of years ago some degenerate decided to use what I suspect is one of those spring-loaded emergency window breakers on my taillights. I don't know why, who or when but when I saw it I couldn't really believe someone did that. Nonetheless, they failed to break the lenses and just dimpled and cracked them, but no light showed through the cracks as they were only cracks, not fissures. I finally decided to replace them, hoping whoever did this is long gone, and I don't run into this problem again. These taillights were a good value and included the bulbs and bulb holders as well. Replacement was only difficult because the originals had been plugged in for 18 years and some of the pins were stuck in the old bulb holders. After removing them and fixing the vehicle side of the plugs, these plugged in and attached back to the vehicle very easily. They certainly look much better and even with my blurry pics, you can see they look much better. I've included a before and after picture of each taillight. If you need new taillights, at least for a 2005 Trailblazer LS 4x4, then these will do the job.Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : dt_moto