5étoiles
32évaluations4étoiles
1évaluation3étoiles
3évaluations2étoiles
0évaluation1étoile
1évaluation
Would recommend92% J'accepte
Good value95% J'accepte
Enjoyable90% J'accepte
27 avis
Great Fender product
Great Fender product. String notches were perfect for my '93 American Strat. However, straight out of the pack it is too high for most players and keep in mind it is curved. I came up with the idea to use one of those thick nail files you can flex to fit the curve. Take your time and check it often. Easier to get it right rather than trying to build it back up!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : guitaraudio
good buy. don't glue it in or over sand!
its just like its supposed to be. there's a curve that i assumed would have matched the neck. however, a previous builder glued the old nut in, which required a small chisel to get it out. Please don't glue your guitar nut or bridge to the guitar! When it needs replaced, it may break the whole thing. It's a crime to do that to a guitar. Anyway, the new nut works fine once it gets properly sanded to fit. Be careful not to over sand! Take your time and get it right!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : sporthitech
9.5" Radius, Not 7.25" As Described
The specs for this nut lead you to believe that it will fit a vintage style (1950s to early '80s) 7.25" radius neck nut slot. However, what you'll end up getting is a well made Melamine nut that's actually 9.5" radius top and bottom. To date, the Fender web page for this product still hasn't updated the change in spec. Besides that, it's a bit too wide for real vintage spec necks, being 1 11/6" instead of 1 5/8". All in all, a big disappointment. Nicely made though!Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : arkansasmusicworks
Nearly perfect fit
This was *nearly* a drop in replacement for a 2006 Mexi Strat. The width is 100% perfect. However, the length was a little long by a few millimeters. Just sanding down evenly on both sides and comparing to the original nut solved that, taking it nice and slow. Depending on what hoodoo you believe about nuts and what material they should be, at the very least this takes a Fender back to stock, and will almost always be a good fit. This solved the open string buzzing issue I had with both a stock and TUSQ nut, and now my guitar feels "right".Lire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : guitaraudio
You can't get any Better
I could not have ask for a better fit it is just right on my 2008 Special Edition Telecaster a Feeler Gage of 18 just slides under the 1st fret no adj of the Truss rod Capo on 1st fret a 12 feeler just slides under 8th fret 5/64 on the 6th string and 3/64 under the 1st at 17th fret pick ups 1/8 " from from bottom and top of both picks ups .Like I said just right Fender
LakemanLire l'avis complet...
Achat vérifié : Oui | État : neuf | Vendu par : guitaraudio
Seller has good pre slotted nuts
Good cut and sound, needed no slot work, just centering and play. Fit like a glove.
Achat vérifié : Oui | État : neuf | Vendu par : guitaraudio
All good
All good, it was a bit lose in my case, but it can be that the earlier non-original one was slighly to big. In length it's slightly standing out... nothing to worry. I'm happy
Achat vérifié : Oui | État : neuf | Vendu par : sporthitech
Can't Really Go Wrong...
Fits like a glove and make a great improvement in the overall sound of my guitar. Warmed it up a bit and freed up some sustain. Great product for the shade tree luthiers out there.
Achat vérifié : Oui | État : neuf | Vendu par : popr47
Great replacement nut
Fit like a glove. Easy installation.
Achat vérifié : Oui | État : neuf | Vendu par : guitaraudio
Perfect fit
Great quality and value
Achat vérifié : Oui | État : neuf | Vendu par : sporthitech