Avis sur le produitIRWIN DOOR LOCK INSTALLATION KIT- FOR WOOD DOORS

Ok item if you want to do one job if you have more than one door spend more money

You want quality you have to spend bigger bucks it works
But it splits the other side of the door wood splits and it moves doesnt lock in place does the job

Achat vérifié :  Oui | État : neuf | Vendu par : discountwarehou...

On Wood

Works well on wood. I had a hard time using the small hole saw on hollow door because it has layers and layers of paper-type product, It smokes and burns instead of cutting through and gets stuck in the hole saw. A design change that would help is to change the cutout hole to a angular line like some hole saws have.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : brain_seller

I chose this product because I've always trusted the Irwin name but after using it, I should have gone with one of the cheaper, no-name, options.

The jig is easy to use and is accurate enough for the task at hand but the large hole saw is not the least bit sharp, I had to use another hole saw that I had that was over 30 years old in it's place.

The small hole saw, while sharp enough, was not quite large enough for the lock that I was installing but I'm sure it's the lock that was pushing the tolerances and not the hole saw.

I did experience a slight alignment issue in which the jig was tilted on the edge of my door so the holes drilled from either side were off but it was less than an 1/8th of an inch and caused no issue while installing my lock.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : thestorebrainerdmn

Does the job.

Screwed it on the door as instructed, began drilling the large hole and the plastic broke. After gluing the plastic and got the hill drill the pilot bit couldn't separate from the drill circle for the big hole. I had to go to Home Depot and buy another pilot bit to drill the small hole. I'd buy another tool with higher quality material if I were you.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : safety3bike

So so

It's plastic so it bends. I still had to mark center points and shove the jig into place. Also, drilling a metal core bit through a plastic sleeve what do think is going to happen? It's going to melt the plastic if you touch it with the core bit. The router bit is useless. You can't see your center marks to place the pilot drill bit properly causing a hole that's off center. However, for the price I only really needed the 2 core bits so I give it 3 stars.Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : theotherwing

Worth the money. Makes drilling out a door quick and straightforward. Be gentle.

I've only used it once for a hollow core door and it worked well. Be careful as the plastic is not super durable. Probably not intended for heavy use.

Achat vérifié :  Oui | État : neuf | Vendu par : newsfree22

Door Hole Saw Kit

I went to father in law's house to install one of those high dollar keyless / key entry deadbolts that can also be opened if you know the code by smart phone app . I get there and the door lock hole was originally cut to small it was either buy a new door or a lot of filing to make the new lock fit or return the part , Until I ran across this installation jig , I still clamped pieces of scrap wood with a good straight edge above and below the jig to make sure it wouldn't move and it worked flawlessly and held up great .Lire l'avis complet...

Achat vérifié :  Oui | État : neuf | Vendu par : RxTpeZQoRFy@Del...

Doorknob installation kit

Good product easy to use.

Achat vérifié :  Oui | État : neuf | Vendu par : genethegeneral

Easy to use on wooden doors

Achat vérifié :  Oui | État : neuf | Vendu par : hillstruevalue2010

Good cost

Works really good.