Hakko FR30182 Desoldering Tool with N61-06 S-Type Nozzles

Mt.Fuji_JAPAN (1348)
100% d'évaluations positives
Prix :
173,16 $US
Environ239,90 $C
+ expédition ($US)
Livraison prévue le jeu. 22 mai - lun. 14 juil.
Renvois :
Renvoi sous 30 jours. Le vendeur paie les frais de renvoi.
État:
Neuf

À propos de ce produit

Product Identifiers

BrandHAKKO
MPNFR30182
GTIN4962615050695
eBay Product ID (ePID)10031751016

Dimensions

Weight0.52kg

Additional Product Features

Custom BundleNo

Toutes les annonces pour ce produit

Achat immédiat
Neuf

Évaluations et avis

4.9
35 évaluations du produit
  • 33 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 2 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

Good value

Would recommend

Good quality

Avis les plus pertinents

  • Many improvements over the 808.

    I was initially disappointed to learn I could no longer get repair parts for my trusty Hakko 808. I also had concerns about ordering from Japan, but to save a $100, I went for it, and was glad I did. The FR-301 came much faster than I anticipated, and although I could not make use of my old 808.tips, the new desoldering tool is a breeze to use. The many improvements include on/off switch, easy temperature setting and easier tip changing. It even comes in a blue and yellow color theme in support of a free Ukraine.

    Achat vérifié : OuiÉtat : Neuf

  • Well worth it!

    Maybe you think you don’t need one of these. That’s where I was with it for a long time. Then, I found myself doing some vintage stereo re-caps, so I finally bought one. As YouTuber AH Fixit says: “Game Changer “. It works incredibly well, and what is even more important is that you are much less likely to damage pads and traces, because it works quick. There are some caveats. Only one tip is included. It is a 1 mm opening and will work for most stuff, but I find myself also needing a 1.3 mm at times. Extra tips are pricey but they should last pretty long The included stand is basically useless, you’ll have to get something else. All that said, I’m sorry that I didn’t take the plunge a long time ago. Would have saved me an incredible amount of time. Also, it frees up one hand so you can hold a board with the other one. Highly recommended.

    Achat vérifié : OuiÉtat : Neuf

  • Very good product

    Works even better than expected. This is a 100 volt unit so I am using a variac to reduce my voltage. Surprisingly, around 100. volts, the pum seems a bit weak but when bump up to 105 volts,the pump is strong enough to pull the foil from the pcb. It is easy to use but it will take a bit of practice to optimize the settings for best results.

    Achat vérifié : OuiÉtat : Neuf

  • Great Product

    Very good high quality desoldering tool. Was ordered on Friday and it arrived on Tuesday. .Only 4 days for FedEx from Japan to Arizona. Only factor to consider is the 100 VAC spec but that is not a problem as I can run it at 100 Volts. Don't know if 120 VAC would shorten the heating element life but I wouldn't take the chance. Wish Hakko would offer a tip assortment to add to the original purchase.

    Achat vérifié : OuiÉtat : Neuf

  • Best tool you'll buy this year

    If you do any amount of desoldering you owe it to yourself to buy this tool. Don't waste your time and money on the cheaper chinese ones thinking you dont use it that much or that they will work just as well. THEY WON'T. I broke 3 of them before buying this Hakko and I am so very glad I did.. A quality tool made to be used. The best tool you'll buy this year.

    Achat vérifié : OuiÉtat : Neuf

  • This unit works great. Tried it out on a...

    This unit works great. Tried it out on a populated circuit board and the components just fell out when desoldered with this unit. Wish I had bought one much earlier. I used a variac to control the voltage but will probably try the resistor modification to allow it to run on 120VAC.

    Achat vérifié : OuiÉtat : Neuf

  • Quick, easy, affordable!

    Have used it once and it works AWESOME! Has not clogged on me -yet! Good that it does come with cleaning rods.. Excellent value.

    Achat vérifié : OuiÉtat : Neuf

  • The best desoldering tool on the market.

    Pro: It works well. The Sales people were fine. But shipping was a little slow. Con: It needs a 120-100V transformer. It doesn't come with needed nozzles and they are very expensive.

    Achat vérifié : OuiÉtat : Neuf

  • "A Quality Product"

    The look and feel of the HAKKO FR301-82 Desoldering Tool says Its a solidly made Quality product that will last for years of use!

    Achat vérifié : OuiÉtat : Neuf

  • Great value

    Invaluable asset if you do a lot of solder rework and repair. This WORKS with US voltages. It just runs a little hotter.

    Achat vérifié : OuiÉtat : Neuf