L'objet de cette annonce a été vendu le lun. 8 sept. à 22:54.
Craftsman 1/2” Drive Cliquet Quick Release VN 44809 USA Tools
Vendu
Craftsman 1/2” Drive Cliquet Quick Release VN 44809 USA Tools
18,00 $US18,00 $US
lun., sept. 08, 10:54 PMlun., sept. 08, 10:54 PM

Craftsman 1/2” Drive Cliquet Quick Release VN 44809 USA Tools

18,00 $US
Environ25,22 $C
Offre directe acceptée
Cet objet a été mis en vente au format Prix fixe avec l'option Offre directe. Le vendeur a accepté le montant de l'Offre directe.
ou Offre directe
État :
D'occasion
    Expédition :
    8,94 $US (environ 12,52 $C) USPS Ground Advantage®.
    Lieu : Federal Way, Washington, États-Unis
    Livraison :
    Livraison prévue entre le lun. 3 nov. et le jeu. 6 nov. à 94104
    Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
    Renvois :
    Renvoi sous 30 jours. Le vendeur paie les frais de renvoi.
    Paiements :
         Diners Club

    Magasinez en toute confiance

    Garantie de remboursement eBay
    Le vendeur assume l'entière responsabilité de cette annonce.
    Numéro de l'objet eBay :396833103664

    Caractéristiques de l'objet

    État
    D'occasion: Un objet ayant été utilisé. L'objet peut présenter certaines traces d'usure, mais il ...
    Brand
    Craftsman
    Type
    Standard Ratchet
    Warranty
    No Warranty
    Number of Pieces
    1
    Length
    10in.
    Quick Release
    Yes
    Manufacturer Part Number
    44809
    Set or Single Item
    Single Item
    Country/Region of Manufacture
    United States
    Drive Size
    1/2in.
    UPC
    Does not apply

    Description de l'objet du vendeur

    À propos de ce vendeur

    Skrilla Tools

    100% d'évaluations positives978 objets vendus

    Membre depuis : nov. 2023
    Répond généralement en 24 heures
    I am a full time tradesman selling new and used tools on Ebay. If you see something you like feel free to make an offer. I will make sure to combine shipping whenever possible to save you money. Thank ...
    Plus
    Visiter la BoutiqueContacter

    Évaluations détaillées du vendeur

    Moyenne au cours des 12 derniers mois
    Qualité de la description
    4.9
    Justesse des frais d'expédition
    4.8
    Rapidité de l'expédition
    5.0
    Communication
    5.0

    Évaluations comme vendeur (480)

    Toutes les évaluationsselected
    Positives
    Neutres
    Négatives
    • j***m (100)- Évaluation laissée par l'acheteur.
      Six derniers mois
      Achat vérifié
      Slow delivery, but it was cheap so I’m not complaining. You can tell the item was “well used” by its condition but it works and fulfills my needs. I’m happy with the purchase.
    Afficher toutes les évaluations

    Évaluations et avis sur le produit

    4.9
    32 évaluations du produit
    • 30 utilisateurs ont attribué une note de 5 étoiles sur 5
    • 2 utilisateurs ont attribué une note de 4 étoiles sur 5
    • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
    • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
    • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

    Would recommend

    Good value

    Good quality

    Avis les plus pertinents

    • "Craftsman" Best Value?

      These Sockets are USA MFD. I've been using these USA Made ones since 1956, when I got my first Craftsman tool set. I still have some of them. Yes the early ones were actually better. I was a mechanic in the USAF & worked parttime off base to earn extra money. I remember using an old Buick drive shaft on a Craftsman 1/2 in. breaker bar to loosen extremely hard to loosen nuts! How much torque did I put on in doing so? I haven't a clue! However I still have this same Breaker Handle today. It's still as it was in 1960! Go ahead young person especially, & buy the junk for 1/2 the price---but be prepared to replace it several times if you do. US Made Craftsman was the best value in hand tools. I know from a lifetime of experience! Thanks for reading! ALW

      Achat vérifié : OuiÉtat : OccasionVendu par : t-93-sc

    • New Old Stock Craftsman "early VH code" 44809

      Lucky to find one of these still with the original store card hanger included, as they were sold in Sears stores around the mid 1990's (VH CODE). The best feature these particular ratchets featured was both a metal quick release button and selector. Around 2000 and later the metal qr buttons and selectors were replaced with plastic versions instead, which were durable, however not as much as the original metal versions were. Overall, as the years passed, the 44809 ratchets "de-evolved" even more by the end of USA production in 2011.

      Achat vérifié : OuiÉtat : NeufVendu par : evemi6

    • Overall, a good tool

      Bought this one to replace the same version, but 40-years old that broke. This new version handle has 4-sharp edges above the grip area. Overall, a good tool that should get me through retirement years. However, I wouldn't buy this again as there are many options of equal durability that won't hurt the hand. Cheers, FanBelt32

      Achat vérifié : OuiÉtat : NeufVendu par : rstuff4u2012

    • Better than new

      I had no idea what I bought until I opened the package. I'm holding a NBM 3/8" ratchet that I planed on tossing in my box But it's better then new why? Old time USA 🇺🇸 it's not worth much but what it's worth to me is our four father built this tool. It's the memory of who we are and are achievements. I thank you for your time. ... rob442

      Achat vérifié : OuiÉtat : OccasionVendu par : fairbargainz

    • Best ratchet ever.

      I love these ratchets. I have four of them. I like the quick switch on the back of the ratchet and the lock and release for the sockets. And finally ,they last forever.

      Achat vérifié : OuiÉtat : Occasion