Vous en avez un à vendre?

Outil de stationnement FR-2 outil de détachement de roue libre

12,95 $US
Environ17,84 $C
État :
Neuf
2 disponibles1 vendu
Ayez l'esprit tranquille. Renvois acceptés.
D'autres ont acheté cet objet. Un acheteur a déjà acheté cet objet.
Expédition :
3,99 $US (environ 5,50 $C) Standard Shipping.
Lieu : Boise, Idaho, États-Unis
Livraison :
Livraison prévue entre le ven. 8 août et le lun. 11 août à 94104
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30 jours. L'acheteur paie les frais de renvoi. Si vous utilisez une étiquette d'envoi eBay, son coût sera déduit du montant de votre remboursement.
Paiements :
     Diners Club

Magasinez en toute confiance

Garantie de remboursement eBay
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :305195424166
Dernière mise à jour : juil. 03, 2025 13:12:35 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
Park Tool
Type
Not Available
MPN
FR-2C
California Prop 65 Warning
<strong>WARNING:</strong> Cancer and Reproductive Harm - <a href='http://www.P65Warnings.ca.gov'>www.P65Warnings.ca.gov</a>
UPC
763477003430

Description de l'objet du vendeur

À propos de ce vendeur

Betterbikes

99,4% d'évaluations positives74K objets vendus

Membre depuis : déc. 2001
Bob's Bicycles | 6681 W Fairview Ave Boise, ID 83704 | 800-554-BOBS(2627) — Bob's Bicycles has been family owned and operated since 1979. From humble beginnings, we've grown into one of the premier ...
Plus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois
Qualité de la description
4.9
Justesse des frais d'expédition
4.9
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (34 741)

Toutes les évaluations
Positives
Neutres
Négatives
    • 2***o (204)- Évaluation laissée par l'acheteur.
      Dernière année
      Achat vérifié
      prices and tool were great!!
    Afficher toutes les évaluations

    Évaluations et avis sur le produit

    4.8
    62 évaluations du produit
    • 55 utilisateurs ont attribué une note de 5 étoiles sur 5
    • 6 utilisateurs ont attribué une note de 4 étoiles sur 5
    • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
    • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
    • 1 utilisateurs ont attribué une note de 1 étoiles sur 5

    Would recommend

    Good value

    Good quality

    Avis les plus pertinents

    • Worked great with an old Chinese 'knockoff' of the Suntour freewheel hub.

      I had a hard time identifying a Chinese JUNK freewheel on an old Kent bicycle. The Chinese JUNK freewheel was a a poorly copied Suntour freewheel. So, this tool not only works with the older Suntour hubs but also hubs poorly copied by the Chinese that may be present on some older Kent bicycles. The ParkTool FR-2 removed the Chinese "JUNK" freewheel and reinstalled a new higher quality Suntour freewheel hub on this old Kent bicycle. It was saved from the bicycle junkyard. The tool appears to be of very high quality. Works great if you have the older freewheel hubs, including Chinese JUNK hubs found on some Kent bicycles.

      Achat vérifié : OuiÉtat : NeufVendu par : trailthis

    • Nice freewheel removal tool at a great price

      The freewheel removal tool will work well if it is used properly. First of all, removal of a freewheel with this tool and a large wrench will not work in most cases. The tool should be secured in a vice and the freewheel/wheel should be secured to the tool with an old quick release skewer. If not, the tool will strip and the freewheel will stubbornly remain on the hub. Destroyed one doing it the wrong way so please learn from my mistake. Moral of the story is "Don't use those pesky notched freewheels and go for the Regina or Shimano splined ones."

      Achat vérifié : OuiÉtat : NeufVendu par : bike*king

    • Good enough

      First, this tool will nearly always now be used on very old freewheels, so less than ideal results should be anticipated. Second, Suntour's 2 prong design was never great. Third, at least for my freewheel, FR-2 prongs were slightly too fat and needed filing to fit. Fourth, even when secured by a QR skewer, the tool could and did slip sideways, somewhat damaging the freewheel, which was removed on second attempt without damaging the hub. FWIW, rust was NOT an issue for this hub and freewheel..

      Achat vérifié : OuiÉtat : NeufVendu par : bike*king

    • Does what it says on the tin ! .

      The quality is second to none , it's difficult to write a review as it is only relevent to people who are into vintage / retro classic cycling . It is an essential tool for everybodies tool box who is into this era , i.e. before the era of splined freewheels . No other tool will do the job of removal of these items , without damage , but this one . It fits sever French and Italian made 'old' freewheels . An essential item ! , well made and it works ! , say no more .

      Achat vérifié : OuiÉtat : NeufVendu par : trailthis

    • Good Quality.

      A bit tall as compared to older tools. Unable to secure axle nut to hold tool in place for that stubborn two prong vintage freewheel. The tool is well made considering that I went free hand with a friend and applied lots of torque. I would buy the tool again if I ever needed to.

      Achat vérifié : OuiÉtat : NeufVendu par : cannondaleexperts