Vous en avez un à vendre?

Adaptateur de barre de tronçonneuse à canon, convertir S12 mm S1 à 9 mm H1 husky et autres scies

17,40 $US
Environ23,92 $C
Était 21,75 $US (20 % de rabais)Qu'est-ce que cela signifie?
Prix de vente récent fourni par le vendeur
État :
Neuf
La vente se termine dans : 5 j 1 h
Plus de 10 disponibles2 209 vendus
Plusieurs personnes veulent cet objet. 675 personnes suivent cet objet.
Ayez l'esprit tranquille. Renvois acceptés.
Expédition :
4,35 $US (environ 5,98 $C) USPS First Class®.
Lieu : Portland, Oregon, États-Unis
Livraison :
Livraison prévue entre le lun. 11 août et le mer. 13 août à 94104
Les dates de livraison approximatives – s'ouvre dans une nouvelle fenêtre ou un nouvel onglet tiennent compte du délai de manutention du vendeur, du code postal de l'expéditeur, du code postal du destinataire et de l'heure de l'acceptation et dépendent du service d'expédition sélectionné et de la réception du paiementréception du paiement - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 30 jours. L'acheteur paie les frais de renvoi. Si vous utilisez une étiquette d'envoi eBay, son coût sera déduit du montant de votre remboursement.
Paiements :
     Diners Club

Magasinez en toute confiance

Garantie de remboursement eBay
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :290744205782
Dernière mise à jour : avr. 11, 2025 15:29:59 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
CANNON
Type
N/A
MPN
CBW-20030
Country/Region of Manufacture
Canada
UPC
Does not apply

Description de l'objet du vendeur

À propos de ce vendeur

PILTZ Hot Saws Tarzan Ziplines LLC

99,8% d'évaluations positives218K objets vendus

Membre depuis : sept. 2003
Répond généralement en 24 heures
We offer the best gear at the best prices, very simple.Thank you for shopping
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois
Qualité de la description
5.0
Justesse des frais d'expédition
4.8
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (59 677)

Toutes les évaluations
Positives
Neutres
Négatives
  • a***d (228)- Évaluation laissée par l'acheteur.
    Dernière année
    Achat vérifié
    Great shipping speed. Great product. 10/10 would recommend. **note to those of you running clone Husqvarna saws, you will need to modify holes in this piece to fit bar studs. I did so, works great. 👍
  • j***t (112)- Évaluation laissée par l'acheteur.
    Il y a plus d'un an
    Achat vérifié
    Due to my slackness, I failed to measure and assumed my small Husqvarna saw had the same stud spacing as my bigger saws. Long story short, this is a great part and great seller to work with for someone who is not stunned and actually confirms fitment before ordering. Works great on my bigger saws.
  • i***n (911)- Évaluation laissée par l'acheteur.
    Six derniers mois
    Achat vérifié
    Fast shipping Easy to work with
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.6
28 évaluations du produit
  • 22 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 4 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Fits 372xp

    I ordered this for form my 288xp but turned out not to fit the bar studs. However it fits a 372xp so I'll use it there instead of modifying for the 288xp. This is a solid piece and with modification it would work just fine with the older saw. So if any older husky owners are planning on this for the saw, yes it will work, but be prepared to break out a dremel and file. As for the newer saw stud spacing it slips right on but will more than likely need a longer chain than the Stihl bar originally calls for, especially with an 8 pin drive.

    Achat vérifié : OuiÉtat : NeufVendu par : kevlargaffs

  • Good for most saws

    This item works good. But it may need to be slightly modified depending on what saw. I bought it for a Husqvarna 3120XP. I had to tweak the one hole so that it would fit over the studs since the studs are further apart on a 3120XP. Did the job fine and is worth the money. Especially if you are running larger more expensive saws and long bars.

    Achat vérifié : OuiÉtat : NeufVendu par : kevlargaffs

  • Some modification required to fit my saw

    Works great but did not fit my 288xp out of the box had to do some Dremel grinding and fine tuning with a hand file to fit. There are others that will fit right out of the box without grinding but they are more expensive and are made with softer metal. Not exactly sure what saws or years of saws this fits without modifying I only own 2 saws. Fits the Stihl bar perfectly though.

    Achat vérifié : OuiÉtat : NeufVendu par : kevlargaffs

  • Very goog but not yet great.

    Stud holes too tight needed to be drilled open a bit to fit Husky large mount. Other than that did the job tended for purchase.

    Achat vérifié : OuiÉtat : NeufVendu par : dssjms

  • Due to my slackness, I failed to measure and assumed my small Husqvarna saw had the same stud spacing as my bigger saws. Long story short, this is a g

    Due to my slackness, I failed to measure and assumed my small Husqvarna saw had the same stud spacing as my bigger saws. Long story short, this is a great part and great seller to work with for someone who is not stunned and actually confirms fitment before ordering. Works great on my bigger saws.

    Achat vérifié : OuiÉtat : NeufVendu par : kevlargaffs