Vous en avez un à vendre?

Park Tool FR-2 Sun Tour 2 broches détacheur de roue libre

12,95 $US
Environ17,85 $C
État :
Neuf
6 disponibles34 vendus
Plusieurs personnes veulent cet objet. 10 personnes suivent cet objet.
Objet tendance. 34 acheteurs ont déjà acheté cet objet.
Expédition :
Sans frais Standard Shipping.
Lieu : Appleton, Wisconsin, États-Unis
Livraison :
Livraison prévue entre le jeu. 7 août et le lun. 11 août à 94104
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvoi sous 60 jours. Le vendeur paie les frais de renvoi.
Paiements :
     Diners Club

Magasinez en toute confiance

Garantie de remboursement eBay
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :194780471323
Dernière mise à jour : juin 30, 2025 09:27:04 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
Park Tool
Type
Not Available
Item Weight
0.1500
MPN
FR-2
Model
Crank Puller
UPC
763477003430

Description de l'objet du vendeur

À propos de ce vendeur

wheelandsprocket

99,7% d'évaluations positives621K objets vendus

Membre depuis : oct. 2004
Répond généralement en 24 heures
Wheel & Sprocket- Est 1973. Hales Corners, WI. Wheel & Sprocket started as a small shop in Hales Corners, WI by passionate people that believed that bikes make life better.Through hardwork and humble ...
Plus
Visiter la BoutiqueContacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois
Qualité de la description
5.0
Justesse des frais d'expédition
5.0
Rapidité de l'expédition
5.0
Communication
5.0

Évaluations comme vendeur (267 619)

Toutes les évaluations
Positives
Neutres
Négatives
  • r***l (66)- Évaluation laissée par l'acheteur.
    Six derniers mois
    Achat vérifié
    New, quality part.
  • r***6 (458)- Évaluation laissée par l'acheteur.
    Six derniers mois
    Achat vérifié
    Good ordering experience
  • t***e (182)- Évaluation laissée par l'acheteur.
    Il y a plus d'un an
    Achat vérifié
    Good price. No problems.
Afficher toutes les évaluations

Évaluations et avis sur le produit

4.8
62 évaluations du produit
  • 55 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 6 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 1 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

  • Worked great with an old Chinese 'knockoff' of the Suntour freewheel hub.

    I had a hard time identifying a Chinese JUNK freewheel on an old Kent bicycle. The Chinese JUNK freewheel was a a poorly copied Suntour freewheel. So, this tool not only works with the older Suntour hubs but also hubs poorly copied by the Chinese that may be present on some older Kent bicycles. The ParkTool FR-2 removed the Chinese "JUNK" freewheel and reinstalled a new higher quality Suntour freewheel hub on this old Kent bicycle. It was saved from the bicycle junkyard. The tool appears to be of very high quality. Works great if you have the older freewheel hubs, including Chinese JUNK hubs found on some Kent bicycles.

    Achat vérifié : OuiÉtat : NeufVendu par : trailthis

  • Nice freewheel removal tool at a great price

    The freewheel removal tool will work well if it is used properly. First of all, removal of a freewheel with this tool and a large wrench will not work in most cases. The tool should be secured in a vice and the freewheel/wheel should be secured to the tool with an old quick release skewer. If not, the tool will strip and the freewheel will stubbornly remain on the hub. Destroyed one doing it the wrong way so please learn from my mistake. Moral of the story is "Don't use those pesky notched freewheels and go for the Regina or Shimano splined ones."

    Achat vérifié : OuiÉtat : NeufVendu par : bike*king

  • Good enough

    First, this tool will nearly always now be used on very old freewheels, so less than ideal results should be anticipated. Second, Suntour's 2 prong design was never great. Third, at least for my freewheel, FR-2 prongs were slightly too fat and needed filing to fit. Fourth, even when secured by a QR skewer, the tool could and did slip sideways, somewhat damaging the freewheel, which was removed on second attempt without damaging the hub. FWIW, rust was NOT an issue for this hub and freewheel..

    Achat vérifié : OuiÉtat : NeufVendu par : bike*king

  • Does what it says on the tin ! .

    The quality is second to none , it's difficult to write a review as it is only relevent to people who are into vintage / retro classic cycling . It is an essential tool for everybodies tool box who is into this era , i.e. before the era of splined freewheels . No other tool will do the job of removal of these items , without damage , but this one . It fits sever French and Italian made 'old' freewheels . An essential item ! , well made and it works ! , say no more .

    Achat vérifié : OuiÉtat : NeufVendu par : trailthis

  • Good Quality.

    A bit tall as compared to older tools. Unable to secure axle nut to hold tool in place for that stubborn two prong vintage freewheel. The tool is well made considering that I went free hand with a friend and applied lots of torque. I would buy the tool again if I ever needed to.

    Achat vérifié : OuiÉtat : NeufVendu par : cannondaleexperts