Vous en avez un à vendre?

Dissipateur thermique et ventilateur pour processeur HP 804057-001

7,00 $US
Environ9,64 $C
ou Offre directe
État :
Neuf
4 disponibles1 vendu
D'autres ont acheté cet objet. Un acheteur a déjà acheté cet objet.
Expédition :
8,19 $US (environ 11,28 $C) USPS Ground Advantage®.
Lieu : Duluth, Minnesota, États-Unis
Livraison :
Livraison prévue entre le sam. 2 août et le ven. 8 août à 94104
Le délai de livraison est estimé en utilisant notre méthode exclusive, basée sur la proximité de l'acheteur du lieu où se trouve l'objet, le service d'expédition sélectionné, l'historique d'expédition du vendeur et d'autres facteurs. Les délais de livraison peuvent varier, particulièrement lors de périodes achalandées.
Renvois :
Renvois refusés.
Paiements :
     Diners Club

Magasinez en toute confiance

Garantie de remboursement eBay
Le vendeur assume l'entière responsabilité de cette annonce.
Numéro de l'objet eBay :156934364064

Caractéristiques de l'objet

État
Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ...
Brand
HP
Type
CPU Fan with Heatsink
MPN
804057-001

Description de l'objet du vendeur

À propos de ce vendeur

zobeck

100% d'évaluations positives70 objets vendus

Membre depuis : août 2013
Répond généralement en 24 heures
Autres objets du vendeurContacter

Évaluations comme vendeur (22)

Toutes les évaluations
Positives
Neutres
Négatives

Évaluations et avis sur le produit

4.8
12 évaluations du produit
  • 9 utilisateurs ont attribué une note de 5 étoiles sur 5
  • 3 utilisateurs ont attribué une note de 4 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 3 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 2 étoiles sur 5
  • 0 utilisateurs ont attribué une note de 1 étoiles sur 5

Quiet

Good value

Performs well

Avis les plus pertinents

  • Easy modification excellent results.

    Had to remove fan from heatsink, heatsink was thicker than original part. Screws were too large to fit existing mounting screws. remounted new fan on old heatsink. works great

    Achat vérifié : OuiÉtat : NeufVendu par : wolftecinc

  • Fits in the HP Deskpro SFF.

    I needed a rear blowing CPU cooler for my HP Deskpro 600 G2. I wasn't too happy with the traditional CPU cooler with the fan on top blowing downward. Took a change on this, assuming that it would fit in the SFF desktop case, and it does...especially with the screws that bolts into the case. This CPU cooler does, indeed, fit, and now act's also as a rear exhaust blower that blows hot air to the rear of the case. It is still so quiet that I had to double check that the fan was actually spinning. Shipped with the pre-applied thermal paste, so this is NOS from the factory. NICE.

    Achat vérifié : OuiÉtat : NeufVendu par : wolftecinc

  • CPU fan works

    I used only the fan and had to exchange screws with the old ones for it to fit. I did not want to have to remove the heat sink. This worked well especially considering it was a different part number from the one it replaced.

    Achat vérifié : OuiÉtat : NeufVendu par : wolftecinc

  • The fans were a great deal and work well.

    I purchased three fans. They were the right type and in great shape. Very easy to install as well.

    Achat vérifié : OuiÉtat : OccasionVendu par : cs-depot

  • Works Great. I am Very Pleased.

    The heatsink fan assembly was easy to install. There are registration pins on the fan shroud but gently turning the shroud back and forth allows it to slip into place. The product was exactly as described and it works well.

    Achat vérifié : OuiÉtat : NeufVendu par : cs-depot