Retourner à l'Accueil

L'objet de cette annonce a été vendu le lun. 19 mai à 18:20. Le vendeur a remis en vente l'objet ou un objet similaire.

Emgo Venom Fairing Honda Kawasaki Yamaha - 70-52505 - Cafe Vintage Racer Bobber

50,00 $US50,00 $US

lun., mai 19, 06:20 PMlun., mai 19, 06:20 PM

Vendre un objet identique

Autres objets du vendeur

Photo 1 sur 5

VENDU

Vous en avez un à vendre?

Vendez le vôtre

Emgo Venom Fairing Honda Kawasaki Yamaha - 70-52505 - Cafe Vintage Racer Bobber

Name: Emgo Venom Fairing Honda Kawasaki Yamaha - 70-52505 - Cafe Vintage Racer Bobber
Brand: Emgo
Price: 68.93 CAD
Availability: OutOfStock
Rating: 4.78 (40 reviews)

hajekreaper

(329)

Autres objets du vendeur

Contacter le vendeur

50,00 $US

Environ68,93 $C

État :

D'occasion

Vendre un objet identique

Autres objets du vendeur

Expédition :

21,00 $US (environ 28,95 $C) UPS Ground.

Lieu : Eagle, Nebraska, États-Unis

Livraison :

Livraison prévue entre le mer. 6 août et le sam. 9 août à 94104

Renvois :

Renvois refusés.

Paiements :

Magasinez en toute confiance

Garantie de remboursement eBay

Recevez l'objet commandé ou obtenez un remboursement. En savoir plusGarantie de remboursement eBay - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet

Le vendeur assume l'entière responsabilité de cette annonce.

Numéro de l'objet eBay :156664357013

Caractéristiques de l'objet

État: D'occasion: Un objet ayant été utilisé. L'objet peut présenter certaines traces d'usure, mais il ... D'occasion: Un objet ayant été utilisé. L'objet peut présenter certaines traces d'usure, mais il fonctionne parfaitement. Il peut s'agir d'un article en montre ou d'un objet retourné au détaillant et ayant été utilisé. Veuillez consulter l'annonce pour tous les détails et une description des imperfections. Afficher toutes les définitions d'état(s'ouvre dans une nouvelle fenêtre ou un nouvel onglet)

Brand: Emgo

Fit: Universal Fit

Type: Front Headlight Fairing

Machine Type: Street Motorcycle

Color: Black

Manufacturer Part Number: 70-52505

Material: ABS Plastic

Country/Region of Manufacture: Taiwan

Placement on Vehicle: Front

Description de l'objet du vendeur

À propos de ce vendeur

Membre depuis : juil. 2016

Répond généralement en 24 heures

Autres objets du vendeur Contacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description

5.0

Justesse des frais d'expédition

4.8

Rapidité de l'expédition

4.9

Communication

5.0

Évaluations comme vendeur (92)

e***e (92)- Évaluation laissée par l'acheteur.
Dernier mois
Achat vérifié
Shipping took a bit longer than expected, but everything went smoothly afterward. The item was exactly as described—well-packed and well-protected. Seller responded quickly to any questions. Recommended seller.
Kawasaki KZ1000 Cylinder Head Good Shape (#157123944971)
0***v (61)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Fast shipping, is exactly as described, and seller responded quickly to questions.
2008-2009 Honda CBR1000RR Fuel Tank/Fuel Pump (#156658571501)
c***c (17)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
Fast shipping, perfectly packaged, item was in perfect condition and exactly the grom Trex frame sliders I needed. Excellent price and amazing quality! I highly recommend this seller
Trex Racing Grom Stunt Cage, Frame Sliders (#156201426392)

Afficher toutes les évaluations

Évaluations et avis sur le produit

4.8

40 évaluations du produit

32 utilisateurs ont attribué une note de 5 étoiles sur 5
7 utilisateurs ont attribué une note de 4 étoiles sur 5
1 utilisateurs ont attribué une note de 3 étoiles sur 5
0 utilisateurs ont attribué une note de 2 étoiles sur 5
0 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

Afficher tous les avis (27)

par -OThV3tUSpa@Deleted
mars 12, 2020
Lil Patience will pay off very well
Took the chance and it paid off well. Need to have patience depending on the headlamp assembly of your year and make. This went onto a 1987 ZL1000 Kawasaki Eliminator and it looks clean IMHO. The Shield is just enough to break the wind off my chest and helmet @ 100 MPH. I did have to get longer 12mm Chrome Bolts due to the gap between the side mount holes and the headlamp bracket tightening down. I made some high density HDPE round gaskets and placed them between the lamp holder and the bracket. You may also need to remove your entire headlamp depending on how your bolts fasten. The the finish trick is to be able to get the headlamp back into the opening and connected and screwed in securely. You can't install without removing the mounting bolts, You cant mount the bolts unless you open ... Took the chance and it paid off well. Need to have patience depending on the headlamp assembly of your year and make. This went onto a 1987 ZL1000 Kawasaki Eliminator and it looks clean IMHO. The Shield is just enough to break the wind off my chest and helmet @ 100 MPH. I did have to get longer 12mm Chrome Bolts due to the gap between the side mount holes and the headlamp bracket tightening down. I made some high density HDPE round gaskets and placed them between the lamp holder and the bracket. You may also need to remove your entire headlamp depending on how your bolts fasten. The the finish trick is to be able to get the headlamp back into the opening and connected and screwed in securely. You can't install without removing the mounting bolts, You cant mount the bolts unless you open the headlamp housing. I hope I am explaining the patience part. None the less, I am enjoying the deflection of high speed wind. Ride Safe!
Achat vérifié : OuiÉtat : NeufVendu par : shopmotomentum
par warhead_71
déc. 07, 2017
Looks good... fitment a bit shoddy.
I tried this on my 78 Honda Goldwing GL1000 and my 78 Honda Hawk CB400T. Looks great on both but decided to keep it on the Hawk. Overall it fits nice and suits the vintage of the older bikes. The only complaint is that some the windscreen holes are a little "off" with the fairing holes... so I had to slot them a little to get it assembled (it ships disassembled). Also I cracked one corner off the windscreen when I over-tightened it... so be careful not to make the same mistake. I can barely notice the crack and the plastic edging/trim holds it in place for now, so I'll probably just epoxy it and live with it. For the money, it looks great, mounts to the headlight ears very sturdy, and it keeps wind off my chest. I'm 6'3" so my head is still up in the wind a bit, but if I duck down a couple ... I tried this on my 78 Honda Goldwing GL1000 and my 78 Honda Hawk CB400T. Looks great on both but decided to keep it on the Hawk. Overall it fits nice and suits the vintage of the older bikes. The only complaint is that some the windscreen holes are a little "off" with the fairing holes... so I had to slot them a little to get it assembled (it ships disassembled). Also I cracked one corner off the windscreen when I over-tightened it... so be careful not to make the same mistake. I can barely notice the crack and the plastic edging/trim holds it in place for now, so I'll probably just epoxy it and live with it. For the money, it looks great, mounts to the headlight ears very sturdy, and it keeps wind off my chest. I'm 6'3" so my head is still up in the wind a bit, but if I duck down a couple inches it really cuts down on the turbulence.
Achat vérifié : OuiÉtat : NeufVendu par : cyclesrus-greatparts
par treb37
mai 30, 2017
Good at this price point
I mounted one on my 94 Honda 750 Magna with generic Emgo fork mounts to get some relief from the pressure on my chest at highway speeds. It works just as I had hoped. However, this is a $55 fairing so I had to fab up some support brackets to keep it from flopping all over the place. Just a couple 3/4" aluminum straps from the mounting holes bolt up to the next to last windshield bolt keeps it firmly in place.I mounted one on my 94 Honda 750 Magna with generic Emgo fork mounts to get some relief from the pressure on my chest at highway speeds. It works just as I had hoped. However, this is a $55 fairing so I had to fab up some support brackets to keep it from flopping all over the place. Just a couple 3/4" aluminum straps from the mounting holes bolt up to the next to last windshield bolt keeps it firmly in place.
Achat vérifié : OuiÉtat : NeufVendu par : cyclesrus-greatparts
par mibson_fuly
juin 06, 2016
Nice fairing with a good price!
It looks good and has a good finishing, but doesn't have a mounting kit. In my bike (Honda CBX/CBF 250 TWISTER) I had to make an adaptation with longer headlight screws and rubber cushions between the fairing and the headlight bracket.
Achat vérifié : OuiÉtat : NeufVendu par : atvunlimited
par bakerlivestock2008
août 12, 2019
Great value, looks good on a cafe bike
It a little lighter than it could be, but still looks great! Overall lifetime may short due to light weight construction, but the price is right. Looks great on a café bike. Had to fab a mounting but no big deal.
Achat vérifié : OuiÉtat : NeufVendu par : shopmotomentum

Photo 1 sur 5

Emgo Venom Fairing Honda Kawasaki Yamaha - 70-52505 - Cafe Vintage Racer Bobber

Magasinez en toute confiance

Caractéristiques de l'objet

Description de l'objet du vendeur

hajekreaper

100% d'évaluations positives•300 objets vendus

Évaluations détaillées du vendeur

Évaluations comme vendeur (92)

Évaluations et avis sur le produit

Avis les plus pertinents

Lil Patience will pay off very well

Looks good... fitment a bit shoddy.

Good at this price point

Nice fairing with a good price!

Great value, looks good on a cafe bike

hajekreaper

100% d'évaluations positives•300 objets vendus

Évaluations détaillées du vendeur

Évaluations comme vendeur (92)