L'objet est en rupture de stock.

Photo 1 sur 3

Vous en avez un à vendre?

Vendez le vôtre

TEMCo Sertisseuse à crampons à marteau V2 avec trous pour montage sur banc (jauge 8AWG À 4/0)

Name: TEMCo Sertisseuse à crampons à marteau V2 avec trous pour montage sur banc (jauge 8AWG À 4/0)
Brand: Temco
Price: 19.11 CAD
Availability: OutOfStock
Rating: 4.9 (461 reviews)

INDU$TRIAL DEALS

(551)

Autres objets du vendeur

Contacter le vendeur

13,86 $US

Environ19,11 $C

État :

Neuf – Boîte ouverte

Quantité :

En rupture de stock5 vendus

Suivre cet objet

Expédition :

Sans frais USPS Ground Advantage®.

Lieu : Brenham, Texas, États-Unis

Livraison :

Livraison prévue entre le mer. 6 août et le lun. 11 août à 94104

Renvois :

Renvois refusés.

Paiements :

Magasinez en toute confiance

Garantie de remboursement eBay

Recevez l'objet commandé ou obtenez un remboursement. En savoir plusGarantie de remboursement eBay - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet

Le vendeur assume l'entière responsabilité de cette annonce.

Numéro de l'objet eBay :156664138314

Dernière mise à jour : juil. 31, 2025 11:19:53 HAEAfficher toutes les modificationsAfficher toutes les modifications

Caractéristiques de l'objet

État: Neuf – Boîte ouverte: Un objet en excellent état qui ne présente aucun défaut de fonctionnement. ... Neuf – Boîte ouverte: Un objet en excellent état qui ne présente aucun défaut de fonctionnement. L'objet peut être offert sans son emballage d'origine ou peut avoir été utilisé pour effectuer des essais ou des démonstrations. L'objet comprend les accessoires fournis avec le produit d'origine et peut inclure une garantie. Veuillez consulter l'annonce pour obtenir la description complète de l'objet. Afficher toutes les définitions d'état(s'ouvre dans une nouvelle fenêtre ou un nouvel onglet)

Brand: Temco

MPN: TH0007

California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

UPC: Does not apply

Description de l'objet du vendeur

À propos de ce vendeur

Membre depuis : déc. 2007

Répond généralement en 24 heures

Visiter la Boutique Contacter

Évaluations détaillées du vendeur

Moyenne au cours des 12 derniers mois

Qualité de la description

4.9

Justesse des frais d'expédition

5.0

Rapidité de l'expédition

5.0

Communication

5.0

Évaluations comme vendeur (464)

Cet objet (1)

Tous les objets (464)

b***n (1200)- Évaluation laissée par l'acheteur.
Six derniers mois
Achat vérifié
accurately described, fair price, well packaged and promptly shipped; thank you

Afficher toutes les évaluations

Évaluations et avis sur le produit

4.9

461 évaluations du produit

417 utilisateurs ont attribué une note de 5 étoiles sur 5
42 utilisateurs ont attribué une note de 4 étoiles sur 5
1 utilisateurs ont attribué une note de 3 étoiles sur 5
1 utilisateurs ont attribué une note de 2 étoiles sur 5
0 utilisateurs ont attribué une note de 1 étoiles sur 5

Good value

Would recommend

Good quality

Avis les plus pertinents

Afficher tous les avis (348)

par mikefchex
avr. 25, 2016
Lug Crimper works great!
I have tried to crimp my 2AWG cable into a lug 3 different ways, putting it in a vise, hitting with a large hammer, and putting it is a 1-ton arbor press. The hammer blow method is my least favorite. You need a lot more than just the normal 16oz framing hammer. I used a 4lb mini sledge (I think that's what it's called). You have to make sure you get a sufficent blow the first time, or everything pops loose and you have to hope the first blow was at least hard enough to hold the wire in place so you can hit it again. The arbor press method works good enough if you have a piece of steel to span the opening in the base of the press. You also have to make sure the press is secured so it doesn't "tip" on you when you lower the handle. So my favorite way is using a vice. I put the lug in the ... I have tried to crimp my 2AWG cable into a lug 3 different ways, putting it in a vise, hitting with a large hammer, and putting it is a 1-ton arbor press. The hammer blow method is my least favorite. You need a lot more than just the normal 16oz framing hammer. I used a 4lb mini sledge (I think that's what it's called). You have to make sure you get a sufficent blow the first time, or everything pops loose and you have to hope the first blow was at least hard enough to hold the wire in place so you can hit it again. The arbor press method works good enough if you have a piece of steel to span the opening in the base of the press. You also have to make sure the press is secured so it doesn't "tip" on you when you lower the handle. So my favorite way is using a vice. I put the lug in the crimper and then line it up in the vise. Then I put the cable in the lug and tighten the vise. You can "test pull" on the cable to make sure it is secure. So far, I haven't run into any "bad or cons" about the item
Achat vérifié : OuiÉtat : NeufVendu par : temco_industrial
par bubbadan2.0
janv. 20, 2020
Great Affordable Crimper !!
The crimper is very well built, super easy to use and should last a very long time...I used it on #4 welding cable and it worked flawlessly every time...Good Item !!!!
Achat vérifié : OuiÉtat : Remis à neufVendu par : temco_industrial_surplus
par carczar956
juil. 30, 2018
"Smaller than you think, but really packs a punch. "
At first I thought this little tool was not going to be up to par. It is super small at about 4 inches tall! Boy was I wrong. This little guy really packs a punch and is very easy to use. I used a small sledge hammer to make quick work of the pounding. You get a lug of your choice not smaller than 8AWG, place it in the anvil slot below the steel block, place your stripped wire in the lug, then smash it with your hammer. You'll know when you got a good crimp. It will feel solid and you're done. It is not practical to use it in the engine bay per say, but it makes quick work on the bench. I totally recommend it. Plus it comes with a 1 year no questions asked warranty card. Great tool. At first I thought this little tool was not going to be up to par. It is super small at about 4 inches tall! Boy was I wrong. This little guy really packs a punch and is very easy to use. I used a small sledge hammer to make quick work of the pounding. You get a lug of your choice not smaller than 8AWG, place it in the anvil slot below the steel block, place your stripped wire in the lug, then smash it with your hammer. You'll know when you got a good crimp. It will feel solid and you're done. It is not practical to use it in the engine bay per say, but it makes quick work on the bench. I totally recommend it. Plus it comes with a 1 year no questions asked warranty card. Great tool.
Achat vérifié : OuiÉtat : NeufVendu par : temco_industrial
par 36krr
avr. 24, 2022
awesome tool
TEMco crimper , works great ( also you can watch you tube tests ) . This has a many great features , spring loaded , mountable , good paint , good fitting parts , good price & TEMco stands behind ALL their products with a good warranty and great customer service I bought this in case my big china crimpers don't work ( plus this takes up no space in the drawer ) what happened is my big china crimp pliers don't have a die for certain size wire and this locks the wire down it works very well , all I probably need is this and if my big china pliers break this is all I will have and that's fine because I think this will last forever , and work forever !TEMco crimper , works great ( also you can watch you tube tests ) . This has a many great features , spring loaded , mountable , good paint , good fitting parts , good price & TEMco stands behind ALL their products with a good warranty and great customer service I bought this in case my big china crimpers don't work ( plus this takes up no space in the drawer ) what happened is my big china crimp pliers don't have a die for certain size wire and this locks the wire down it works very well , all I probably need is this and if my big china pliers break this is all I will have and that's fine because I think this will last forever , and work forever !
Achat vérifié : OuiÉtat : OccasionVendu par : temco_industrial_surplus
par raywalz333
nov. 06, 2019
Easy to use, professional results.
This Cable Crimper works great! It produces professional looking crimps and is easy to use. I use it in my press as I don't want to beat the thing with a hammer. The only down side is the "stop scale" is a bit difficult to read.
Achat vérifié : OuiÉtat : NeufVendu par : temco_industrial

Photo 1 sur 3

TEMCo Sertisseuse à crampons à marteau V2 avec trous pour montage sur banc (jauge 8AWG À 4/0)

Magasinez en toute confiance

Caractéristiques de l'objet

Description de l'objet du vendeur

INDU$TRIAL DEALS

100% d'évaluations positives•1,6K objets vendus

Évaluations détaillées du vendeur

Évaluations comme vendeur (464)

Évaluations et avis sur le produit

Avis les plus pertinents

Lug Crimper works great!

Great Affordable Crimper !!

"Smaller than you think, but really packs a punch. "

awesome tool

Easy to use, professional results.

INDU$TRIAL DEALS

100% d'évaluations positives•1,6K objets vendus

Évaluations détaillées du vendeur

Évaluations comme vendeur (464)