Photo 1 sur 6

Vous en avez un à vendre?

Vendez le vôtre

Régulateur de pression d'injection de carburant moteur CM5013 pour Ford Motorcraft 1999-2003

muhamasroor_0

(60)

Autres objets du vendeur

Contacter le vendeur

73,99 $US

Environ101,67 $C

État :

Neuf

Cueillette :

Cueillette locale gratuite depuis : Houston, Texas, États-Unis.

Expédition :

Sans frais USPS Ground Advantage®.

Lieu : Houston, Texas, États-Unis

Livraison :

Livraison prévue entre le mar. 12 août et le mar. 19 août à 94104

Renvois :

Renvois refusés.

Paiements :

Magasinez en toute confiance

Garantie de remboursement eBay

Recevez l'objet commandé ou obtenez un remboursement. En savoir plusGarantie de remboursement eBay - s'ouvre dans une nouvelle fenêtre ou un nouvel onglet

Le vendeur assume l'entière responsabilité de cette annonce.

Numéro de l'objet eBay :364411552016

Caractéristiques de l'objet

État: Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine ... Neuf: Un objet entièrement neuf, inutilisé, non ouvert, non endommagé, dans son emballage d'origine (s'il y a lieu). L'emballage doit être identique à celui utilisé pour la vente au détail, à moins que le fabricant ait utilisé un emballage non destiné à la vente au détail, par exemple une boîte ou un sac de plastique non marqué. Veuiller consulter l'annonce pour tous les détails. Afficher toutes les définitions d'état(s'ouvre dans une nouvelle fenêtre ou un nouvel onglet)

À propos de ce produit

Product Identifiers

Brand

Motorcraft

Manufacturer Part Number

CM-5013

eBay Product ID (ePID)

75684676

Additional Product Features

Notes

Description--Fuel Injection Pressure Regulator

Sub Type

Fuel Pressure Regulator

Part Type

Carburetion

Description de l'objet du vendeur

À propos de ce vendeur

Membre depuis : août 2018

Autres objets du vendeur Contacter

Évaluations comme vendeur (50)

v***6 (38)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
This seller is using deceptive photos. When told that a refund was necessary the seller did not believe me, despite the photos showing the difference in what he/she posted and what was sent. Even though this seller doesn’t accept returns, the seller demanded one in order to get a refund. He/she is still knowingly using the photo. A refund was issued after the seller inspected the return. The seller was still in a state of denial that it is using deceptive photos. 1.photo from post 2. Received
Men Hair Spray Unscented Extra Hold 8.3 Oz (#364100020898)
t***5 (428)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
Had issue with faulty description / missing parts I asked seller for a partial refund at the cost of the missing parts Seller less than friendly or willing to solve issue Ended up getting refund through ebay
FREEMOVE Hydration Backpack w/ 2L Hydration Bladder and Insulated Cooler Grey (#364140964170)
c***t (114)- Évaluation laissée par l'acheteur.
Il y a plus d'un an
Achat vérifié
I contacted the seller after 10 days of not receiving this item!! He apoligized for not sending it out - he said it probably got misplaced at his shop. He said he would issue me a credit immediate (which he did). He also told me if he finds it, he will ship it to me for free. I wouldn't have to purchase it again - the item & shipping would be free. Only time will tell.
NEW ! Genuine HP Merapi Wired USB Optical Glossy Black Scroll Mouse 801527-001 (#364072611399)

Afficher toutes les évaluations

Évaluations et avis sur le produit

4.2

134 évaluations du produit

101 utilisateurs ont attribué une note de 5 étoiles sur 5
5 utilisateurs ont attribué une note de 4 étoiles sur 5
2 utilisateurs ont attribué une note de 3 étoiles sur 5
2 utilisateurs ont attribué une note de 2 étoiles sur 5
24 utilisateurs ont attribué une note de 1 étoiles sur 5

Would recommend

Good value

Good quality

Avis les plus pertinents

Afficher tous les avis (106)

par javow21
avr. 09, 2024
Mine was junk right out of the box.
I was installing a new hpop an figured I would replace my irp valve as good maintenance. After installing pump an irp valve in the truck. The truck would surge an stall periodically. After truck got warm. It would start then stall. It was so bad it wouldn't even make a test drive. I had to wait to Diag it till the next day because my scanner was at work. Plugged scanner in an noticed my icp sense pressure reading where all over the place an low. Then checked the irp valve duty cycle an was up an down around 50 percent an 65 percent when hot when it stalled. 65 percent duty cycle is wide open but icp would ready around 540 right before it stalled letting me know the irp had failed in the Huey system. I reinstalled old ipr so the truck would run an drive. Let's hope they do the right thing ... I was installing a new hpop an figured I would replace my irp valve as good maintenance. After installing pump an irp valve in the truck. The truck would surge an stall periodically. After truck got warm. It would start then stall. It was so bad it wouldn't even make a test drive. I had to wait to Diag it till the next day because my scanner was at work. Plugged scanner in an noticed my icp sense pressure reading where all over the place an low. Then checked the irp valve duty cycle an was up an down around 50 percent an 65 percent when hot when it stalled. 65 percent duty cycle is wide open but icp would ready around 540 right before it stalled letting me know the irp had failed in the Huey system. I reinstalled old ipr so the truck would run an drive. Let's hope they do the right thing an refund me my part an at least 3hrs labor for Diagnosing there bad part an parts replace after there part failure
Achat vérifié : OuiÉtat : NeufVendu par : ingc1018
par stepside77
oct. 27, 2022
Chinese knock off, its a 30 dollar IPR valve that the ford ipr removal tool doesn't even work on .
This is a knock off valve. It is not a genuine ford part. It is not even the same size that the ford IPR removal tool fits. This IPR valve is a inch and a 1/16 a original ford part is an 1 and an 1/8. Threads were damaged right out of the packaging. This is exactly the same part as the Chinese knock off 39 dollar IPR. Don't waste your time or money on this.
Achat vérifié : OuiÉtat : NeufVendu par : rash_80153
par eclipse260
oct. 23, 2022
Not OEM Ford part. Knock off. Misspelled words on package. Giveaway
Product promised was a Ford factory part. Part received was not a ford factory part in a package that looked like a Ford factory part. Words were not written properly and others misspelled. Also, part was a different wrench size than factory and threads on solenoid nut were fine thread, not course like the factory part.
Achat vérifié : OuiÉtat : NeufVendu par : felice_106
par blove291
avr. 28, 2024
Don't be fooled by the "Motorcraft" bag. It wasn't sealed.
Don't be fooled by the "Motorcraft" bag. It wasn't sealed. On first inspection it was of lower quality than the OEM part. It's also dimensionally different from the original. I installed the part and the truck refused to run. It would buck, sputter and die after 3 seconds. I bought this IPR for a HPOP rebuild. After the truck failed to run, I re-installed the original and it came right back to life. Don't be fooled by the "Motorcraft" bag. It wasn't sealed. On first inspection it was of lower quality than the OEM part. It's also dimensionally different from the original. I installed the part and the truck refused to run. It would buck, sputter and die after 3 seconds. I bought this IPR for a HPOP rebuild. After the truck failed to run, I re-installed the original and it came right back to life.
Achat vérifié : OuiÉtat : NeufVendu par : ingc1018
par ccjeep94
sept. 03, 2018
Buy OEM
I bought this to repair the hard start problem I was having with my 2000 7.3. I only use OEM sensors and electrical parts. I have used aftermarket sensors in the past and they do not last. U get what u pay for. I also replaced the ICP at the same time as the IPR.
Achat vérifié : OuiÉtat : NeufVendu par : vampkittykat

Photo 1 sur 6

Régulateur de pression d'injection de carburant moteur CM5013 pour Ford Motorcraft 1999-2003

Magasinez en toute confiance

Caractéristiques de l'objet

À propos de ce produit

Product Identifiers

Additional Product Features

Description de l'objet du vendeur

muhamasroor_0

80% d'évaluations positives•213 objets vendus

Évaluations comme vendeur (50)

Évaluations et avis sur le produit

Avis les plus pertinents

Mine was junk right out of the box.

Chinese knock off, its a 30 dollar IPR valve that the ford ipr removal tool doesn't even work on .

Not OEM Ford part. Knock off. Misspelled words on package. Giveaway

Don't be fooled by the "Motorcraft" bag. It wasn't sealed.

Buy OEM

muhamasroor_0

80% d'évaluations positives•213 objets vendus

Évaluations comme vendeur (50)